Re: [PATCH V3 5/7] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 4 Jan 2022 at 15:00, Souradeep Chowdhury
<quic_schowdhu@xxxxxxxxxxx> wrote:
>
> Add the Embedded USB Debugger(EUD) device tree node. The
> node contains EUD base register region and EUD mode
> manager register regions along with the interrupt entry.
> Also add the connector to EUD which is mapped as the child
> of dwc3. The connector is attached to EUD via port. Also add
> the role-switch property to dwc3 node.
>
> Signed-off-by: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 53a21d0..2d14e5c 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -1315,6 +1315,18 @@
>                                 phys = <&usb_2_hsphy>;
>                                 phy-names = "usb2-phy";
>                                 maximum-speed = "high-speed";
> +                               usb-role-switch;
> +                               usb_con: eud_usb_connector {

Is this node meant to be named connector instead?

> +                                       compatible = "qcom,usb-connector-eud",
> +                                                    "usb-c-connector";
> +                                       ports {
> +                                               port@0 {
> +                                                       usb2_role_switch: endpoint {
> +                                                               remote-endpoint = <&eud_ep>;
> +                                                       };
> +                                               };
> +                                       };
> +                               };
>                         };
>                 };
>
> @@ -1339,6 +1351,19 @@
>                         interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
>                 };
>
> +               eud:  eud@88e0000 {
> +                       compatible = "qcom,sc7280-eud","qcom,eud";
> +                       reg = <0 0x88e0000 0 0x2000>,
> +                             <0 0x88e2000 0 0x1000>;
> +                       interrupt-parent = <&pdc>;
> +                       interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
> +                       port {
> +                               eud_ep: endpoint {
> +                                       remote-endpoint = <&usb2_role_switch>;
> +                               };
> +                       };
> +               };
> +
>                 nsp_noc: interconnect@a0c0000 {
>                         reg = <0 0x0a0c0000 0 0x10000>;
>                         compatible = "qcom,sc7280-nsp-noc";
> --
> 2.7.4
>


-- 
With best wishes
Dmitry



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux