Re: [PATCH v2 3/9] arm64: dts: meson: add initial device-trees for X96-AIR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/01/2022 17:39, Christian Hewitt wrote:
> The Amediatek X96-AIR is based on Amlogic S905X3 reference board
> designs and ships in multiple configurations:
> 
> – 4GB DDR3 + 64GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
> – 4GB DDR3 + 32GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet
> – 4GB DDR3 + 32GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet
> – 2GB DDR3 + 16GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet
> ...
> - HDMI 2.1 video
> - S/PDIF optical output
> - AV output
> - 2x USB 2.0 inc. OTG port
> - 1x USB 3.0 port
> - IR receiver
> - 1x micro SD card slot (internal)
> - 1x Reset/Update button (in AV jack)
> - 7-segment VFD
> 
> The device-tree with -gbit suffix supports models with Gigabit
> Ethernet, and the device-tree with no suffix supports models
> with 10/100 Ethernet.
> 
> Signed-off-by: Christian Hewitt <christianshewitt@xxxxxxxxx>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile          |   2 +
>  .../dts/amlogic/meson-sm1-x96-air-gbit.dts    | 133 ++++++++++++++++++
>  .../boot/dts/amlogic/meson-sm1-x96-air.dts    | 112 +++++++++++++++
>  3 files changed, 247 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 5148cd9e5146..1c0e554f54fc 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -56,4 +56,6 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
> new file mode 100644
> index 000000000000..7e1a74046ba5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
> @@ -0,0 +1,133 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 BayLibre SAS. All rights reserved.
> + * Copyright (c) 2020 Christian Hewitt <christianshewitt@xxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-sm1-ac2xx.dtsi"
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> +
> +/ {
> +	compatible = "amediatech,x96-air-gbit", "amlogic,sm1";
> +	model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
> +
> +	sound {
> +		compatible = "amlogic,axg-sound-card";
> +		model = "X96-AIR";
> +		audio-aux-devs = <&tdmout_b>;
> +		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> +				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
> +				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
> +				"TDM_B Playback", "TDMOUT_B OUT";
> +
> +		assigned-clocks = <&clkc CLKID_MPLL2>,
> +				  <&clkc CLKID_MPLL0>,
> +				  <&clkc CLKID_MPLL1>;
> +		assigned-clock-parents = <0>, <0>, <0>;
> +		assigned-clock-rates = <294912000>,
> +				       <270950400>,
> +				       <393216000>;
> +		status = "okay";
> +
> +		dai-link-0 {
> +			sound-dai = <&frddr_a>;
> +		};
> +
> +		dai-link-1 {
> +			sound-dai = <&frddr_b>;
> +		};
> +
> +		dai-link-2 {
> +			sound-dai = <&frddr_c>;
> +		};
> +
> +		/* 8ch hdmi interface */
> +		dai-link-3 {
> +			sound-dai = <&tdmif_b>;
> +			dai-format = "i2s";
> +			dai-tdm-slot-tx-mask-0 = <1 1>;
> +			dai-tdm-slot-tx-mask-1 = <1 1>;
> +			dai-tdm-slot-tx-mask-2 = <1 1>;
> +			dai-tdm-slot-tx-mask-3 = <1 1>;
> +			mclk-fs = <256>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> +			};
> +		};
> +
> +		/* hdmi glue */
> +		dai-link-4 {
> +			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> +			codec {
> +				sound-dai = <&hdmi_tx>;
> +			};
> +		};
> +	};
> +};
> +
> +&arb {
> +	status = "okay";
> +};
> +
> +&clkc_audio {
> +	status = "okay";
> +};
> +
> +&ethmac {
> +	status = "okay";
> +
> +	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
> +	pinctrl-names = "default";
> +	phy-mode = "rgmii-txid";
> +	phy-handle = <&external_phy>;
> +
> +	rx-internal-delay-ps = <800>;
> +};
> +
> +&ext_mdio {
> +	external_phy: ethernet-phy@0 {
> +		/* Realtek RTL8211F (0x001cc916) */
> +		reg = <0>;
> +		max-speed = <1000>;
> +
> +		reset-assert-us = <10000>;
> +		reset-deassert-us = <80000>;
> +		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
> +
> +		interrupt-parent = <&gpio_intc>;
> +		/* MAC_INTR on GPIOZ_14 */
> +		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +};
> +
> +&frddr_a {
> +	status = "okay";
> +};
> +
> +&frddr_b {
> +	status = "okay";
> +};
> +
> +&frddr_c {
> +	status = "okay";
> +};
> +
> +&ir {
> +	linux,rc-map-name = "rc-x96max";
> +};
> +
> +&tdmif_b {
> +	status = "okay";
> +};
> +
> +&tdmout_b {
> +	status = "okay";
> +};
> +
> +&tohdmitx {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
> new file mode 100644
> index 000000000000..cd93d798f2a3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
> @@ -0,0 +1,112 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 BayLibre SAS. All rights reserved.
> + * Copyright (c) 2020 Christian Hewitt <christianshewitt@xxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-sm1-ac2xx.dtsi"
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> +
> +/ {
> +	compatible = "amediatech,x96-air", "amlogic,sm1";
> +	model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
> +
> +	sound {
> +		compatible = "amlogic,axg-sound-card";
> +		model = "X96-AIR";
> +		audio-aux-devs = <&tdmout_b>;
> +		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> +				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
> +				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
> +				"TDM_B Playback", "TDMOUT_B OUT";
> +
> +		assigned-clocks = <&clkc CLKID_MPLL2>,
> +				  <&clkc CLKID_MPLL0>,
> +				  <&clkc CLKID_MPLL1>;
> +		assigned-clock-parents = <0>, <0>, <0>;
> +		assigned-clock-rates = <294912000>,
> +				       <270950400>,
> +				       <393216000>;
> +		status = "okay";
> +
> +		dai-link-0 {
> +			sound-dai = <&frddr_a>;
> +		};
> +
> +		dai-link-1 {
> +			sound-dai = <&frddr_b>;
> +		};
> +
> +		dai-link-2 {
> +			sound-dai = <&frddr_c>;
> +		};
> +
> +		/* 8ch hdmi interface */
> +		dai-link-3 {
> +			sound-dai = <&tdmif_b>;
> +			dai-format = "i2s";
> +			dai-tdm-slot-tx-mask-0 = <1 1>;
> +			dai-tdm-slot-tx-mask-1 = <1 1>;
> +			dai-tdm-slot-tx-mask-2 = <1 1>;
> +			dai-tdm-slot-tx-mask-3 = <1 1>;
> +			mclk-fs = <256>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> +			};
> +		};
> +
> +		/* hdmi glue */
> +		dai-link-4 {
> +			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> +			codec {
> +				sound-dai = <&hdmi_tx>;
> +			};
> +		};
> +	};
> +};
> +
> +&arb {
> +	status = "okay";
> +};
> +
> +&clkc_audio {
> +	status = "okay";
> +};
> +
> +&ethmac {
> +	status = "okay";
> +	phy-handle = <&internal_ephy>;
> +	phy-mode = "rmii";
> +};
> +
> +&frddr_a {
> +	status = "okay";
> +};
> +
> +&frddr_b {
> +	status = "okay";
> +};
> +
> +&frddr_c {
> +	status = "okay";
> +};
> +
> +&ir {
> +	linux,rc-map-name = "rc-beelink-gs1";
> +};
> +
> +&tdmif_b {
> +	status = "okay";
> +};
> +
> +&tdmout_b {
> +	status = "okay";
> +};
> +
> +&tohdmitx {
> +	status = "okay";
> +};
> 

Missing:
Tested-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> # X96-Air with Gbit/s PHY
Tested-by: Piotr Oniszczuk <piotr.oniszczuk@xxxxxxxxx> # X96-Air with 10/100 Eth



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux