The commit 6c56c6cd8031 ("gpio: samsung: Drop support for Exynos SoCs")
removed support for the Samsung Exynos SoC in lrgacy GPIO driver, since
it was moved to new pinctrl driver. Remove old, unused bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
---
.../devicetree/bindings/gpio/gpio-samsung.txt | 41 -------------------
1 file changed, 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-samsung.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
deleted file mode 100644
index 5375625e8cd2..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Samsung Exynos4 GPIO Controller
-
-Required properties:
-- compatible: Compatible property value should be "samsung,exynos4-gpio>".
-
-- reg: Physical base address of the controller and length of memory mapped
- region.
-
-- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes
- should be the following with values derived from the SoC user manual.
- <[phandle of the gpio controller node]
- [pin number within the gpio controller]
- [mux function]
- [flags and pull up/down]
- [drive strength]>
-
- Values for gpio specifier:
- - Pin number: is a value between 0 to 7.
- - Flags and Pull Up/Down: 0 - Pull Up/Down Disabled.
- 1 - Pull Down Enabled.
- 3 - Pull Up Enabled.
- Bit 16 (0x00010000) - Input is active low.
- - Drive Strength: 0 - 1x,
- 1 - 3x,
- 2 - 2x,
- 3 - 4x
-
-- gpio-controller: Specifies that the node is a gpio controller.
-- #address-cells: should be 1.
-- #size-cells: should be 1.
-
-Example:
-
- gpa0: gpio-controller@11400000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400000 0x20>;
- #gpio-cells = <4>;
- gpio-controller;
- };
--
2.32.0
