The Supermicro X9SCi-LN4F server mainboard has a two LEDs and a button under the control of the BMC. This patch makes them accessible under Linux running on the BMC. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> --- v3: - Adjust to schema changes v2: - https://lore.kernel.org/lkml/20211207210823.1975632-9-j.neuschaefer@xxxxxxx/ - Adjust to new GPIO controller names - Explicitly set pinmux to GPIO for GPIO keys and LEDs v1: - https://lore.kernel.org/lkml/20210602120329.2444672-9-j.neuschaefer@xxxxxxx/ --- .../nuvoton-wpcm450-supermicro-x9sci-ln4f.dts | 43 +++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts index 83f27fbf4e939..3ee61251a16d0 100644 --- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts +++ b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts @@ -8,6 +8,9 @@ #include "nuvoton-wpcm450.dtsi" +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/gpio/gpio.h> + / { model = "Supermicro X9SCi-LN4F BMC"; compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450"; @@ -20,6 +23,46 @@ memory@0 { device_type = "memory"; reg = <0 0x08000000>; /* 128 MiB */ }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins>; + + uid { + label = "UID button"; + linux,code = <KEY_HOME>; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + uid { + label = "UID"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; + + heartbeat { + label = "heartbeat"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinctrl { + key_pins: mux-keys { + groups = "gspi", "sspi"; + function = "gpio"; + }; + + led_pins: mux-leds { + groups = "hg3", "hg0", "pwm4"; + function = "gpio"; + }; }; &serial0 { -- 2.30.2
