On 15-12-21, 16:02, Peter Geis wrote: > Good Afternoon, > > This is my series to support the usb2 phy devices on the rk356x. > The rk356x phy has a single muxed interrupt and has moved the usb2phy > nodes out of the grf and into their own nodes. > The phy needs to tie back into the grf for register control, similar to > the rv1108. > By moving the phys into their own nodes, they now have full > #address_cells = 2 register addresses, but they still reside below the 32bit > mmio range. > > This driver series only supports the host configuration for the rk356x. > I have have tested it on the following: > rk3566 - Pine64 Quartz64 Model A > rk3399 - Pine64 Rockpro64 > > Please provide feedback and comments as you see fit. Applied patches 2-6 to phy-next Thanks -- ~Vinod
