Re: [Patch v3 3/9] dt-bindings: arm: tegra: Add NVIDIA Tegra194 axi2apb binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 21, 2021 at 06:21:11PM +0530, Sumit Gupta wrote:
> Add device-tree binding documentation to represent the axi2apb bridges
> used by Control Backbone (CBB) 1.0 in Tegra194 SOC. All errors for APB
> slaves are reported as slave error because APB bas single bit to report
> error. So, CBB driver needs to further check error status registers of
> all the axi2apb bridges to find error type.
> 
> Signed-off-by: Sumit Gupta <sumitg@xxxxxxxxxx>
> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
>  .../arm/tegra/nvidia,tegra194-axi2apb.yaml    | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml
> new file mode 100644
> index 000000000000..788a13f8aa93
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml
> @@ -0,0 +1,40 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-axi2apb.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: NVIDIA Tegra194 AXI2APB bridge
> +
> +maintainers:
> +  - Sumit Gupta <sumitg@xxxxxxxxxx>
> +
> +properties:
> +  $nodename:
> +    pattern: "^axi2apb@([0-9a-f]+)$"
> +
> +  compatible:
> +    enum:
> +      - nvidia,tegra194-axi2apb
> +
> +  reg:
> +    maxItems: 6
> +    description: Physical base address and length of registers for all bridges
> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    axi2apb: axi2apb@2390000 {

As axi2apb appears to be a bus, then all the child nodes (APB devices) 
should be under this node.

Is NVidia still putting all the devices at the root level rather than 
under a bus node which is preferred?

> +      compatible = "nvidia,tegra194-axi2apb";
> +      reg = <0x02390000 0x1000>,
> +            <0x023a0000 0x1000>,
> +            <0x023b0000 0x1000>,
> +            <0x023c0000 0x1000>,
> +            <0x023d0000 0x1000>,
> +            <0x023e0000 0x1000>;
> +    };
> -- 
> 2.17.1
> 
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux