[PATCH 1/1] arm64: tegra: Enable Jetson Xavier NX USB device mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This commit enables USB device mode at J5 micro-B
USB port of Jetson Xavier NX.

Signed-off-by: Wayne Chang <waynec@xxxxxxxxxx>
---
 .../boot/dts/nvidia/tegra194-p3509-0000.dtsi  | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
index a055f17218bb..f4733b98fcaa 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
@@ -1826,6 +1826,10 @@ padctl@3520000 {
 			pads {
 				usb2 {
 					lanes {
+						usb2-0 {
+							status = "okay";
+						};
+
 						usb2-1 {
 							status = "okay";
 						};
@@ -1846,6 +1850,20 @@ usb3-2 {
 			};
 
 			ports {
+				usb2-0 {
+					mode = "otg";
+					status = "okay";
+					usb-role-switch;
+					connector {
+						compatible = "gpio-usb-b-connector",
+							"usb-b-connector";
+						label = "micro-USB";
+						type = "micro";
+						vbus-gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1)
+								GPIO_ACTIVE_LOW>;
+					};
+				};
+
 				usb2-1 {
 					mode = "host";
 					status = "okay";
@@ -1874,6 +1892,13 @@ usb@3610000 {
 			phy-names = "usb2-1", "usb2-2", "usb3-2";
 		};
 
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>;
+			phy-names = "usb2-0";
+		};
+
 		spi@3270000 {
 			status = "okay";
 
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux