On Sat, Dec 18, 2021 at 5:36 PM David Heidelberg <david@xxxxxxx> wrote:
>
> Convert Qualcomm GLINK binding to the yaml syntax.
>
> Signed-off-by: David Heidelberg <david@xxxxxxx>
> ---
> .../bindings/soc/qcom/qcom,glink.txt | 94 ----------------
> .../bindings/soc/qcom/qcom,glink.yaml | 106 ++++++++++++++++++
> 2 files changed, 106 insertions(+), 94 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
> deleted file mode 100644
> index 1214192847ac..000000000000
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
> +++ /dev/null
> @@ -1,94 +0,0 @@
> -Qualcomm GLINK edge binding
> -
> -This binding describes a Qualcomm GLINK edge, a fifo based mechanism for
> -communication between subsystem-pairs on various Qualcomm platforms. Two types
> -of edges can be described by the binding; the GLINK RPM edge and a SMEM based
> -edge.
> -
> -- compatible:
> - Usage: required for glink-rpm
> - Value type: <stringlist>
> - Definition: must be "qcom,glink-rpm"
> -
> -- label:
> - Usage: optional
> - Value type: <string>
> - Definition: should specify the subsystem name this edge corresponds to.
> -
> -- interrupts:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: should specify the IRQ used by the remote processor to
> - signal this processor about communication related events
> -
> -- qcom,remote-pid:
> - Usage: required for glink-smem
> - Value type: <u32>
> - Definition: specifies the identifier of the remote endpoint of this edge
> -
> -- qcom,rpm-msg-ram:
> - Usage: required for glink-rpm
> - Value type: <prop-encoded-array>
> - Definition: handle to RPM message memory resource
> -
> -- mboxes:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: reference to the "rpm_hlos" mailbox in APCS, as described
> - in mailbox/mailbox.txt
> -
> -= GLINK DEVICES
> -Each subnode of the GLINK node represent function tied to a virtual
> -communication channel. The name of the nodes are not important. The properties
> -of these nodes are defined by the individual bindings for the specific function
> -- but must contain the following property:
> -
> -- qcom,glink-channels:
> - Usage: required
> - Value type: <stringlist>
> - Definition: a list of channels tied to this function, used for matching
> - the function to a set of virtual channels
> -
> -- qcom,intents:
> - Usage: optional
> - Value type: <prop-encoded-array>
> - Definition: a list of size,amount pairs describing what intents should
> - be preallocated for this virtual channel. This can be used
> - to tweak the default intents available for the channel to
> - meet expectations of the remote.
> -
> -= EXAMPLE
> -The following example represents the GLINK RPM node on a MSM8996 device, with
> -the function for the "rpm_request" channel defined, which is used for
> -regulators and root clocks.
> -
> - apcs_glb: mailbox@9820000 {
> - compatible = "qcom,msm8996-apcs-hmss-global";
> - reg = <0x9820000 0x1000>;
> -
> - #mbox-cells = <1>;
> - };
> -
> - rpm_msg_ram: memory@68000 {
> - compatible = "qcom,rpm-msg-ram";
> - reg = <0x68000 0x6000>;
> - };
> -
> - rpm-glink {
> - compatible = "qcom,glink-rpm";
> -
> - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> -
> - qcom,rpm-msg-ram = <&rpm_msg_ram>;
> -
> - mboxes = <&apcs_glb 0>;
> -
> - rpm-requests {
> - compatible = "qcom,rpm-msm8996";
> - qcom,glink-channels = "rpm_requests";
> -
> - qcom,intents = <0x400 5
> - 0x800 1>;
> - ...
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml
> new file mode 100644
> index 000000000000..11a7c845ea0a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.yaml
> @@ -0,0 +1,106 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,glink.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Qualcomm GLINK edge
> +
> +description: |
> + Qualcomm GLINK edge, a fifo based mechanism for communication between
> + subsystem-pairs on various Qualcomm platforms. Two types of edges can be
> + described by the binding; the GLINK RPM edge and a SMEM based.
> +
> +maintainers:
> + - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> +
> +properties:
> + $nodename:
> + pattern: "^(rpm-)?glink(-edge)?$"
> +
> + compatible:
> + const: qcom,glink-rpm
> +
> + label:
> + $ref: /schemas/types.yaml#/definitions/string
> + description: should specify the subsystem name this edge corresponds to
> +
> + interrupts:
> + description: >
> + should specify the IRQ used by the remote processor to
> + signal this processor about communication related events
> + maxItems: 1
> +
> + mboxes:
> + description: >
> + reference to the "rpm_hlos" mailbox in APCS, as described
> + in mailbox/mailbox.txt
> +
> + qcom,remote-pid:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: specifies the identifier of the remote endpoint of this edge
> +
> + qcom,rpm-msg-ram:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: RPM message memory resource
> +
> +patternProperties:
> + ".*":
This doesn't work because it will match everything including the above
properties. You can use additionalProperties or unevaluatedProperties
instead.
> + type: object
> + properties:
> + qcom,glink-channels:
> + $ref: /schemas/types.yaml#/definitions/string
> + description: >
> + a list of channels tied to this function, used for matching
> + the function to a set of virtual channels
> +
> + 'qcom,intents':
Don't need quotes.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description: >
> + a list of size, amount pairs describing what intents should
> + be preallocated for this virtual channel. This can be used
> + to tweak the default intents available for the channel to
> + meet expectations of the remote
> +
> + required:
> + - qcom,glink-channels
> +
> + additionalProperties: true
However, if the child nodes are the above properties plus other device
specific properties as this indicates, then you need to split this to
a separate schema file for those device specific schemas to reference.
Otherwise, unevaluatedProperties can't see all the properties for the
child node.
Rob
