Re: [RFC PATCH 2/3] media: platform: Add CRU driver for RZ/G2L SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Prabhakar,

Thank you for the patch.

On Tue, Dec 07, 2021 at 01:23:50AM +0000, Lad Prabhakar wrote:
> Add v4l driver for Renesas RZ/G2L Camera data Receiving Unit.
> 
> The CRU consists of a MIPI CSI-2 block and an Image Processing block.
> Image Processing block input can be either CSI-2 or parallel input.
> 
> Based on a patch in the BSP by Hien Huynh
> <hien.huynh.px@xxxxxxxxxxx>
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
>  drivers/media/platform/Kconfig                |   1 +
>  drivers/media/platform/Makefile               |   2 +
>  drivers/media/platform/rzg2l-cru/Kconfig      |  15 +
>  drivers/media/platform/rzg2l-cru/Makefile     |   4 +
>  drivers/media/platform/rzg2l-cru/rzg2l-core.c | 473 ++++++++++++
>  drivers/media/platform/rzg2l-cru/rzg2l-cru.h  | 244 ++++++
>  drivers/media/platform/rzg2l-cru/rzg2l-csi2.c | 625 ++++++++++++++++
>  drivers/media/platform/rzg2l-cru/rzg2l-dma.c  | 703 ++++++++++++++++++
>  drivers/media/platform/rzg2l-cru/rzg2l-v4l2.c | 361 +++++++++
>  9 files changed, 2428 insertions(+)
>  create mode 100644 drivers/media/platform/rzg2l-cru/Kconfig
>  create mode 100644 drivers/media/platform/rzg2l-cru/Makefile
>  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-core.c
>  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-cru.h
>  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-csi2.c
>  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-dma.c
>  create mode 100644 drivers/media/platform/rzg2l-cru/rzg2l-v4l2.c
> 
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index cf4adc64c953..5059f1b0a6ba 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -169,6 +169,7 @@ source "drivers/media/platform/exynos4-is/Kconfig"
>  source "drivers/media/platform/am437x/Kconfig"
>  source "drivers/media/platform/xilinx/Kconfig"
>  source "drivers/media/platform/rcar-vin/Kconfig"
> +source "drivers/media/platform/rzg2l-cru/Kconfig"
>  source "drivers/media/platform/atmel/Kconfig"
>  source "drivers/media/platform/sunxi/Kconfig"
>  
> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> index a148553babfc..51cc0a1a4c94 100644
> --- a/drivers/media/platform/Makefile
> +++ b/drivers/media/platform/Makefile
> @@ -66,6 +66,8 @@ obj-$(CONFIG_VIDEO_XILINX)		+= xilinx/
>  obj-$(CONFIG_VIDEO_RCAR_ISP)		+= rcar-isp.o
>  obj-$(CONFIG_VIDEO_RCAR_VIN)		+= rcar-vin/
>  
> +obj-$(CONFIG_VIDEO_RZG2L_CRU)		+= rzg2l-cru/

Not something that needs to be done in this patch, but should be create
a renesas directory and move all drivers for Renesas devices there ?

> +
>  obj-$(CONFIG_VIDEO_ATMEL_ISC)		+= atmel/
>  obj-$(CONFIG_VIDEO_ATMEL_ISI)		+= atmel/
>  obj-$(CONFIG_VIDEO_ATMEL_XISC)		+= atmel/
> diff --git a/drivers/media/platform/rzg2l-cru/Kconfig b/drivers/media/platform/rzg2l-cru/Kconfig
> new file mode 100644
> index 000000000000..75664be0206d
> --- /dev/null
> +++ b/drivers/media/platform/rzg2l-cru/Kconfig
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: GPL-2.0
> +config VIDEO_RZG2L_CRU
> +	tristate "RZ/G2L Camera Receiving Unit (CRU) Driver"
> +	depends on VIDEO_V4L2 && OF
> +	depends on ARCH_R9A07G044 || COMPILE_TEST
> +	select MEDIA_CONTROLLER
> +	select VIDEO_V4L2_SUBDEV_API
> +	select VIDEOBUF2_DMA_CONTIG
> +	select RESET_CONTROLLER
> +	select V4L2_FWNODE
> +	help
> +	  Support for Renesas RZ/G2L Camera Receiving Unit (CRU) driver.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called rzg2l-cru.
> diff --git a/drivers/media/platform/rzg2l-cru/Makefile b/drivers/media/platform/rzg2l-cru/Makefile
> new file mode 100644
> index 000000000000..624b431b12b0
> --- /dev/null
> +++ b/drivers/media/platform/rzg2l-cru/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +rzg2l-cru-objs = rzg2l-core.o rzg2l-csi2.o rzg2l-dma.o rzg2l-v4l2.o
> +
> +obj-$(CONFIG_VIDEO_RZG2L_CRU) += rzg2l-cru.o
> diff --git a/drivers/media/platform/rzg2l-cru/rzg2l-core.c b/drivers/media/platform/rzg2l-cru/rzg2l-core.c
> new file mode 100644
> index 000000000000..11e8f5c03887
> --- /dev/null
> +++ b/drivers/media/platform/rzg2l-cru/rzg2l-core.c
> @@ -0,0 +1,473 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Driver for Renesas RZ/G2L CRU
> + *
> + * Copyright (C) 2021 Renesas Electronics Corp.
> + *
> + * Based on Renesas R-Car VIN
> + * Copyright (C) 2016 Renesas Electronics Corp.
> + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> + * Copyright (C) 2013 Cogent Embedded, Inc., <source@xxxxxxxxxxxxxxxxxx>
> + * Copyright (C) 2008 Magnus Damm
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/slab.h>
> +#include <linux/sys_soc.h>
> +
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mc.h>
> +
> +#include "rzg2l-cru.h"
> +
> +#define v4l2_dev_to_cru(d)	container_of(d, struct rzg2l_cru_dev, v4l2_dev)
> +
> +static int rzg2l_cru_csi2_link_notify(struct media_link *link, u32 flags,
> +				      unsigned int notification)
> +{
> +	struct rzg2l_cru_group *group = container_of(link->graph_obj.mdev,
> +						struct rzg2l_cru_group, mdev);
> +	struct rzg2l_cru_dev *cru = NULL;
> +	struct video_device *vdev;
> +	struct media_pad *csi_pad;
> +	struct media_entity *entity;
> +	struct v4l2_subdev *sd;
> +	int ret = 0;
> +
> +	ret = v4l2_pipeline_link_notify(link, flags, notification);
> +	if (ret)
> +		return ret;
> +
> +	/* Only care about link enablement for CRU nodes. */
> +	if (!(flags & MEDIA_LNK_FL_ENABLED) ||
> +	    !is_media_entity_v4l2_video_device(link->sink->entity))
> +		return 0;
> +
> +	/*
> +	 * Don't allow link changes if any entity in the graph is
> +	 * streaming, modifying the CHSEL register fields can disrupt
> +	 * running streams.
> +	 */
> +	media_device_for_each_entity(entity, &group->mdev)
> +		if (entity->stream_count)
> +			return -EBUSY;
> +
> +	mutex_lock(&group->lock);
> +	vdev = media_entity_to_video_device(link->sink->entity);
> +	cru = container_of(vdev, struct rzg2l_cru_dev, vdev);
> +
> +	csi_pad = media_entity_remote_pad(&group->cru->vdev.entity.pads[0]);
> +	if (csi_pad) {
> +		ret = -EMLINK;
> +		goto out;
> +	}
> +
> +	sd = media_entity_to_v4l2_subdev(link->source->entity);
> +	if (group->csi.subdev == sd) {
> +		cru->group->csi.channel = link->source->index - 1;
> +		cru->is_csi = true;
> +	} else {
> +		ret = -ENODEV;
> +	}
> +
> +out:
> +	mutex_unlock(&group->lock);
> +
> +	return ret;
> +}
> +
> +static const struct media_device_ops rzg2l_cru_media_ops = {
> +	.link_notify = rzg2l_cru_csi2_link_notify,
> +};
> +
> +static void rzg2l_cru_group_put(struct rzg2l_cru_dev *cru)
> +{
> +	struct rzg2l_cru_group *group = cru->group;
> +
> +	mutex_lock(&group->lock);
> +	cru->group = NULL;
> +	cru->v4l2_dev.mdev = NULL;
> +	mutex_unlock(&group->lock);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Group async notifier
> + */
> +
> +static int rzg2l_cru_group_notify_complete(struct v4l2_async_notifier *notifier)
> +{
> +	struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> +	struct rzg2l_cru_group *group = cru->group;
> +	unsigned int i;
> +	int ret;
> +
> +	ret = media_device_register(&group->mdev);
> +	if (ret)
> +		return ret;
> +
> +	ret = v4l2_device_register_subdev_nodes(&cru->v4l2_dev);
> +	if (ret) {
> +		cru_err(cru, "Failed to register subdev nodes\n");
> +		return ret;
> +	}
> +
> +	if (!video_is_registered(&cru->vdev)) {
> +		ret = rzg2l_cru_v4l2_register(cru->group->cru);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	/* Create all media device links between CRU and CSI-2's. */
> +	for (i = 1; i <= CSI2_VCHANNEL; i++) {
> +		struct media_entity *source, *sink;
> +
> +		source = &cru->group->csi.subdev->entity;
> +		sink = &cru->group->cru->vdev.entity;
> +
> +		ret = media_create_pad_link(source, i, sink, 0, 0);
> +		if (ret) {
> +			cru_err(cru, "Error adding link from %s to %s\n",
> +				source->name, sink->name);
> +			break;
> +		}
> +	}
> +
> +	return ret;
> +}
> +
> +static void rzg2l_cru_group_notify_unbind(struct v4l2_async_notifier *notifier,
> +					  struct v4l2_subdev *subdev,
> +					  struct v4l2_async_subdev *asd)
> +{
> +	struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> +
> +	if (cru->group->cru)
> +		rzg2l_cru_v4l2_unregister(cru->group->cru);
> +
> +	mutex_lock(&cru->group->lock);
> +
> +	if (cru->group->csi.asd == asd) {
> +		cru->group->csi.subdev = NULL;
> +		cru_dbg(cru, "Unbind CSI-2 %s\n", subdev->name);
> +	}
> +
> +	mutex_unlock(&cru->group->lock);
> +
> +	media_device_unregister(&cru->group->mdev);
> +}
> +
> +static int rzg2l_cru_group_notify_bound(struct v4l2_async_notifier *notifier,
> +					struct v4l2_subdev *subdev,
> +					struct v4l2_async_subdev *asd)
> +{
> +	struct rzg2l_cru_dev *cru = v4l2_dev_to_cru(notifier->v4l2_dev);
> +	unsigned int i;
> +
> +	mutex_lock(&cru->group->lock);
> +
> +	if (cru->group->csi.asd == asd) {
> +		cru->group->csi.subdev = subdev;
> +		cru_dbg(cru, "Bound CSI-2 %s to slot %u\n", subdev->name, i);
> +	}
> +
> +	mutex_unlock(&cru->group->lock);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_async_notifier_operations
> +rzg2l_cru_group_notify_ops = {
> +	.bound = rzg2l_cru_group_notify_bound,
> +	.unbind = rzg2l_cru_group_notify_unbind,
> +	.complete = rzg2l_cru_group_notify_complete,
> +};
> +
> +static int rzg2l_cru_parse_of(struct rzg2l_cru_dev *cru, unsigned int id)
> +{
> +	struct v4l2_fwnode_endpoint vep = {
> +		.bus_type = V4L2_MBUS_CSI2_DPHY,
> +	};
> +	struct fwnode_handle *ep, *fwnode;
> +	struct v4l2_async_subdev *asd;
> +	int ret;
> +
> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(cru->dev), 3, id, 0);
> +	if (!ep)
> +		return 0;
> +
> +	fwnode = fwnode_graph_get_remote_endpoint(ep);
> +	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> +	fwnode_handle_put(ep);
> +	if (ret) {
> +		cru_err(cru, "Failed to parse %pOF\n", to_of_node(fwnode));
> +		ret = -EINVAL;
> +		goto out;
> +	}
> +
> +	if (!of_device_is_available(to_of_node(fwnode))) {
> +		cru_dbg(cru, "OF device %pOF disabled, ignoring\n",
> +			to_of_node(fwnode));
> +		ret = -ENOTCONN;
> +		goto out;
> +	}
> +
> +	asd = v4l2_async_nf_add_fwnode(&cru->group->notifier, fwnode,
> +				       struct v4l2_async_subdev);
> +	if (IS_ERR(asd)) {
> +		ret = PTR_ERR(asd);
> +		goto out;
> +	}
> +
> +	cru->group->csi.asd = asd;
> +
> +	cru_dbg(cru, "Add group OF device %pOF to slot %u\n",
> +		to_of_node(fwnode), vep.base.id);
> +out:
> +	fwnode_handle_put(fwnode);
> +
> +	return ret;
> +}
> +
> +static int rzg2l_cru_parse_of_graph(struct rzg2l_cru_dev *cru)
> +{
> +	int ret;
> +
> +	cru->group->cru = cru;
> +	v4l2_async_nf_init(&cru->group->notifier);
> +
> +	ret = rzg2l_cru_parse_of(cru, 0);
> +	if (ret)
> +		return ret;
> +
> +	cru->group->notifier.ops = &rzg2l_cru_group_notify_ops;
> +
> +	if (list_empty(&cru->group->notifier.asd_list))
> +		return 0;
> +
> +	ret = v4l2_async_nf_register(&cru->v4l2_dev, &cru->group->notifier);
> +	if (ret < 0) {
> +		cru_err(cru, "Notifier registration failed\n");
> +		v4l2_async_nf_cleanup(&cru->group->notifier);
> +		return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +static int rzg2l_cru_csi2_init(struct rzg2l_cru_dev *cru)
> +{
> +	struct media_device *mdev = NULL;
> +	const struct of_device_id *match;
> +	struct rzg2l_cru_group *group;
> +	int ret;
> +
> +	cru->pad.flags = MEDIA_PAD_FL_SINK;
> +	ret = media_entity_pads_init(&cru->vdev.entity, 1, &cru->pad);
> +	if (ret)
> +		return ret;
> +
> +	group = kzalloc(sizeof(*group), GFP_KERNEL);
> +	if (!group)
> +		return -ENOMEM;
> +
> +	mutex_init(&group->lock);
> +	mdev = &group->mdev;
> +	mdev->dev = cru->dev;
> +	mdev->ops = &rzg2l_cru_media_ops;
> +
> +	match = of_match_node(cru->dev->driver->of_match_table,
> +			      cru->dev->of_node);
> +
> +	strscpy(mdev->driver_name, KBUILD_MODNAME, sizeof(mdev->driver_name));
> +	strscpy(mdev->model, match->compatible, sizeof(mdev->model));
> +	snprintf(mdev->bus_info, sizeof(mdev->bus_info), "platform:%s",
> +		 dev_name(mdev->dev));
> +
> +	cru->group = group;
> +	cru->v4l2_dev.mdev = &group->mdev;
> +
> +	media_device_init(mdev);
> +
> +	ret = rzg2l_cru_parse_of_graph(cru);
> +	if (ret)
> +		rzg2l_cru_group_put(cru);
> +
> +	return ret;
> +}
> +
> +static int rzg2l_cru_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct rzg2l_cru_dev *cru = container_of(ctrl->handler,
> +						 struct rzg2l_cru_dev,
> +						 ctrl_handler);
> +	int ret = 0;
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
> +		if (cru->state == STOPPED || cru->state == STOPPING)
> +			cru->num_buf = ctrl->val;
> +		else
> +			ret = -EBUSY;
> +
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops rzg2l_cru_ctrl_ops = {
> +	.s_ctrl = rzg2l_cru_s_ctrl,
> +};
> +
> +static int rzg2l_cru_probe(struct platform_device *pdev)
> +{
> +	struct rzg2l_cru_dev *cru;
> +	struct v4l2_ctrl *ctrl;
> +	int irq, ret;
> +
> +	cru = devm_kzalloc(&pdev->dev, sizeof(*cru), GFP_KERNEL);
> +	if (!cru)
> +		return -ENOMEM;
> +
> +	cru->dev = &pdev->dev;
> +	cru->info = of_device_get_match_data(&pdev->dev);
> +
> +	cru->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(cru->base))
> +		return PTR_ERR(cru->base);
> +
> +	irq = platform_get_irq(pdev, 1);
> +	if (irq < 0)
> +		return irq;
> +
> +	cru->vclk = clk_get(&pdev->dev, "vclk");
> +	if (IS_ERR(cru->vclk))
> +		return PTR_ERR(cru->vclk);
> +
> +	cru->cmn_restb = devm_reset_control_get_by_index(&pdev->dev, 0);
> +	if (IS_ERR(cru->cmn_restb)) {
> +		dev_err(&pdev->dev, "failed to get cpg cmn_restb\n");
> +		return PTR_ERR(cru->cmn_restb);
> +	}
> +	cru->presetn = devm_reset_control_get_by_index(&pdev->dev, 1);
> +	if (IS_ERR(cru->presetn)) {
> +		dev_err(&pdev->dev, "failed to get cpg presetn\n");
> +		return PTR_ERR(cru->presetn);
> +	}
> +	cru->aresetn = devm_reset_control_get_by_index(&pdev->dev, 2);
> +	if (IS_ERR(cru->aresetn)) {
> +		dev_err(&pdev->dev, "failed to get cpg aresetn\n");
> +		return PTR_ERR(cru->aresetn);
> +	}
> +
> +	ret = reset_control_deassert(cru->presetn);
> +	if (ret) {
> +		cru_err(cru, "failed to deassert presetn\n");
> +		return ret;
> +	}
> +
> +	ret = rzg2l_cru_dma_register(cru, irq);
> +	if (ret)
> +		return ret;
> +
> +	platform_set_drvdata(pdev, cru);
> +
> +	ret = rzg2l_cru_csi2_init(cru);
> +	if (ret)
> +		goto error_dma_unregister;
> +
> +	ret = rzg2l_csi2_register(cru);
> +	if (ret)
> +		return ret;

As commented in the DT bindings, the CSI-2 receiver seems to be a
separate IP core, so I think it should be handled by a separate driver.

> +
> +	v4l2_ctrl_handler_init(&cru->ctrl_handler, 1);
> +	ctrl = v4l2_ctrl_new_std(&cru->ctrl_handler, &rzg2l_cru_ctrl_ops,
> +				 V4L2_CID_MIN_BUFFERS_FOR_CAPTURE,
> +				 1, HW_BUFFER_MAX, 1, HW_BUFFER_DEFAULT);
> +	if (cru->ctrl_handler.error) {
> +		dev_err(&pdev->dev, "%s: control initialization error %d\n",
> +			__func__, cru->ctrl_handler.error);
> +		ret = cru->ctrl_handler.error;
> +		goto free_ctrl;
> +	}
> +
> +	ctrl->flags &= ~V4L2_CTRL_FLAG_READ_ONLY;
> +	cru->v4l2_dev.ctrl_handler = &cru->ctrl_handler;
> +
> +	cru->num_buf = HW_BUFFER_DEFAULT;
> +
> +	pm_suspend_ignore_children(&pdev->dev, true);
> +	pm_runtime_enable(&pdev->dev);
> +
> +	return 0;
> +
> +free_ctrl:
> +	v4l2_ctrl_handler_free(&cru->ctrl_handler);
> +error_dma_unregister:
> +	rzg2l_cru_dma_unregister(cru);
> +
> +	return ret;
> +}
> +
> +static const struct rzg2l_cru_info rzg2l_cru_info_generic = {
> +	.max_width = 2800,
> +	.max_height = 4096,
> +};
> +
> +static const struct of_device_id rzg2l_cru_of_id_table[] = {
> +	{
> +		.compatible = "renesas,rzg2l-cru",
> +		.data = &rzg2l_cru_info_generic,
> +	},
> +	{ /* Sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, rzg2l_cru_of_id_table);
> +
> +static int rzg2l_cru_remove(struct platform_device *pdev)
> +{
> +	struct rzg2l_cru_dev *cru = platform_get_drvdata(pdev);
> +	struct rzg2l_cru_group *group = cru->group;
> +
> +	pm_runtime_disable(&pdev->dev);
> +
> +	rzg2l_cru_v4l2_unregister(cru);
> +
> +	v4l2_async_nf_unregister(&group->notifier);
> +	v4l2_async_nf_cleanup(&group->notifier);
> +
> +	media_device_cleanup(&group->mdev);
> +	mutex_destroy(&group->lock);
> +	cru->group->cru = NULL;
> +	cru->group = NULL;
> +	cru->v4l2_dev.mdev = NULL;
> +	kfree(group);
> +
> +	v4l2_ctrl_handler_free(&cru->ctrl_handler);
> +	cru->vdev.ctrl_handler = NULL;
> +
> +	rzg2l_csi2_unregister(cru);
> +	rzg2l_cru_dma_unregister(cru);
> +	reset_control_assert(cru->presetn);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver rzg2l_cru_driver = {
> +	.driver = {
> +		.name = "rzg2l-cru",
> +		.of_match_table = rzg2l_cru_of_id_table,
> +	},
> +	.probe = rzg2l_cru_probe,
> +	.remove = rzg2l_cru_remove,
> +};
> +
> +module_platform_driver(rzg2l_cru_driver);
> +
> +MODULE_DESCRIPTION("Renesas RZ/G2L CRU driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/media/platform/rzg2l-cru/rzg2l-cru.h b/drivers/media/platform/rzg2l-cru/rzg2l-cru.h
> new file mode 100644
> index 000000000000..6ec19d5338b4
> --- /dev/null
> +++ b/drivers/media/platform/rzg2l-cru/rzg2l-cru.h
> @@ -0,0 +1,244 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * rzg2l-cru.h
> + *
> + * Renesas RZ/G2L CRU
> + *
> + * Copyright (C) 2021 Renesas Electronics Corp.
> + */
> +
> +#ifndef __RZG2L_CRU__
> +#define __RZG2L_CRU__
> +
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-dev.h>
> +#include <media/v4l2-device.h>
> +#include <media/videobuf2-v4l2.h>
> +#include <linux/reset.h>
> +#include <linux/clk.h>

Please sort the headers alphabetically.

> +
> +/* Number of HW buffers */
> +#define HW_BUFFER_MAX		8
> +#define HW_BUFFER_DEFAULT	3
> +
> +/* Address alignment mask for HW buffers */
> +#define HW_BUFFER_MASK		0x1ff
> +
> +/* Maximum number of CSI2 virtual channels */
> +#define CSI2_VCHANNEL		4
> +
> +/**
> + * enum rzg2l_cru_dma_state - DMA states
> + * @STOPPED:   No operation in progress
> + * @STARTING:  Capture starting up
> + * @RUNNING:   Operation in progress have buffers
> + * @STOPPING:  Stopping operation
> + */
> +enum rzg2l_cru_dma_state {
> +	STOPPED = 0,
> +	STARTING,
> +	RUNNING,
> +	STOPPING,

Those names are too generic and could conflict. Adding a RZG2L_CRU_DMA_
prefix would help.

> +};
> +
> +/**
> + * struct rzg2l_cru_video_format - Data format stored in memory
> + * @fourcc: Pixelformat
> + * @bpp: Bytes per pixel
> + */
> +struct rzg2l_cru_video_format {
> +	u32 fourcc;
> +	u8 bpp;
> +};

You can drop this and use v4l2_format_info().

> +
> +/**
> + * struct rzg2l_cru_info - Information about the particular CRU implementation
> + * @max_width:	max input width the CRU supports
> + * @max_height:	max input height the CRU supports
> + */
> +struct rzg2l_cru_info {
> +	unsigned int max_width;
> +	unsigned int max_height;
> +};
> +
> +enum rzg2l_csi2_pads {
> +	RZG2L_CSI2_SINK = 0,
> +	RZG2L_CSI2_SOURCE_VC0,
> +	RZG2L_CSI2_SOURCE_VC1,
> +	RZG2L_CSI2_SOURCE_VC2,
> +	RZG2L_CSI2_SOURCE_VC3,
> +	NR_OF_RZG2L_CSI2_PAD,
> +};

There should be a single source pad, carrying all virtual channels (and
data types). Support for virtual channels in V4L2 is under development,
see https://lore.kernel.org/linux-media/20211130141536.891878-1-tomi.valkeinen@xxxxxxxxxxxxxxxx/T/#t.

> +
> +struct rzg2l_csi2 {
> +	struct device *dev;
> +
> +	struct v4l2_subdev subdev;
> +	struct media_pad pads[NR_OF_RZG2L_CSI2_PAD];
> +
> +	struct v4l2_async_notifier notifier;
> +	struct v4l2_async_subdev asd;
> +	struct v4l2_subdev *remote;
> +
> +	struct v4l2_mbus_framefmt mf;

If https://lore.kernel.org/linux-media/20211217135022.364954-1-tomi.valkeinen@xxxxxxxxxxxxxxxx/T/#t
gets merged first, this should be replaced with usage of the active
subdev state.

> +
> +	struct mutex lock;
> +	int stream_count;
> +
> +	unsigned short lanes;
> +	unsigned long hsfreq;
> +};
> +
> +/**
> + * struct rzg2l_cru_dev - Renesas CRU device structure
> + * @dev:		(OF) device
> + * @base:		device I/O register space remapped to virtual memory
> + * @info:		info about CRU instance
> + *
> + * @vclk:		CRU main clock
> + * @cmn_restb:		CRU_CMN_RSTB reset line
> + * @presetn:		CRU_PRESETN reset line
> + * @aresetn:		CRU_ARESETN reset line
> + *
> + * @vdev:		V4L2 video device associated with CRU
> + * @v4l2_dev:		V4L2 device
> + * @ctrl_handler:	V4L2 control handler
> + * @num_buf:		Holds the current number of buffers enabled
> + * @notifier:		V4L2 asynchronous subdevs notifier
> + *
> + * @group:		CSI group
> + * @pad:		media pad for the video device entity
> + *
> + * @lock:		protects @queue
> + * @queue:		vb2 buffers queue
> + * @scratch:		cpu address for scratch buffer
> + * @scratch_phys:	physical address of the scratch buffer
> + *
> + * @qlock:		protects @queue_buf, @buf_list, @sequence
> + *			@state
> + * @queue_buf:		Keeps track of buffers given to HW slot
> + * @buf_list:		list of queued buffers
> + * @sequence:		V4L2 buffers sequence number
> + * @state:		keeps track of operation state
> + *
> + * @is_csi:		flag to mark the CRU as using a CSI-2 subdevice
> + * @csi2:		pointer to CSI2 structure
> + *
> + * @input_is_yuv:	flag to mark the input format of CRU
> + * @output_is_yuv:	flag to mark the output format of CRU
> + *
> + * @mbus_code:		media bus format code
> + * @format:		active V4L2 pixel format
> + *
> + * @compose:		active composing
> + * @source:		active size of the video source
> + * @std:		active video standard of the video source
> + */
> +struct rzg2l_cru_dev {
> +	struct device *dev;
> +	void __iomem *base;
> +	const struct rzg2l_cru_info *info;
> +
> +	struct clk *vclk;
> +
> +	struct reset_control *cmn_restb;
> +	struct reset_control *presetn;
> +	struct reset_control *aresetn;
> +
> +	struct video_device vdev;
> +	struct v4l2_device v4l2_dev;
> +	struct v4l2_ctrl_handler ctrl_handler;
> +	u8 num_buf;
> +	struct v4l2_async_notifier notifier;
> +
> +	struct rzg2l_cru_group *group;
> +	struct media_pad pad;
> +
> +	struct mutex lock;
> +	struct vb2_queue queue;
> +	void *scratch;
> +	dma_addr_t scratch_phys;
> +
> +	spinlock_t qlock;
> +	struct vb2_v4l2_buffer *queue_buf[HW_BUFFER_MAX];
> +	struct list_head buf_list;
> +	unsigned int sequence;
> +	enum rzg2l_cru_dma_state state;
> +
> +	struct rzg2l_csi2 *csi2;
> +	bool is_csi;
> +
> +	bool input_is_yuv;
> +	bool output_is_yuv;
> +
> +	u32 mbus_code;
> +	struct v4l2_pix_format format;
> +
> +	struct v4l2_rect compose;
> +};
> +
> +/* Debug */
> +#define cru_dbg(d, fmt, arg...)		dev_dbg((d)->dev, fmt, ##arg)
> +#define cru_info(d, fmt, arg...)	dev_info((d)->dev, fmt, ##arg)
> +#define cru_warn(d, fmt, arg...)	dev_warn((d)->dev, fmt, ##arg)
> +#define cru_err(d, fmt, arg...)		dev_err((d)->dev, fmt, ##arg)

I'd use dev_*() directly in the code, wrapper macros make it less
readable in my opinion.

> +
> +/**
> + * struct rzg2l_cru_group - CRU CSI2 group information

What does this group ? In RZ/G2L there's only one CSI-2 receiver and one
image processing block as far as I can see.

> + * @mdev: media device which represents the group
> + *
> + * @lock: protects the count, notifier, vin and csi members
> + *
> + * @notifier: group notifier for CSI-2 async subdevices
> + * @cru: CRU instances which are part of the group
> + * @csi: array of pairs of fwnode and subdev pointers
> + *       to all CSI-2 subdevices.
> + */
> +struct rzg2l_cru_group {
> +	struct media_device mdev;
> +
> +	struct mutex lock;
> +	struct v4l2_async_notifier notifier;
> +	struct rzg2l_cru_dev *cru;
> +
> +	struct {
> +		struct v4l2_async_subdev *asd;
> +		struct v4l2_subdev *subdev;
> +		u32 channel;
> +	} csi;
> +};
> +
> +static void rzg2l_cru_write(struct rzg2l_cru_dev *cru, u32 offset, u32 value)
> +{
> +	iowrite32(value, cru->base + offset);
> +}
> +
> +static u32 rzg2l_cru_read(struct rzg2l_cru_dev *cru, u32 offset)
> +{
> +	return ioread32(cru->base + offset);
> +}
> +
> +static __maybe_unused void rzg2l_cru_set(struct rzg2l_cru_dev *cru, unsigned int reg, u32 set)
> +{
> +	rzg2l_cru_write(cru, reg, rzg2l_cru_read(cru, reg) | set);
> +}
> +
> +static __maybe_unused void rzg2l_cru_clr(struct rzg2l_cru_dev *cru, unsigned int reg, u32 clr)
> +{
> +	rzg2l_cru_write(cru, reg, rzg2l_cru_read(cru, reg) & ~clr);
> +}
> +
> +int rzg2l_cru_dma_register(struct rzg2l_cru_dev *cru, int irq);
> +void rzg2l_cru_dma_unregister(struct rzg2l_cru_dev *cru);
> +
> +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru);
> +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru);
> +
> +int rzg2l_csi2_register(struct rzg2l_cru_dev *cru);
> +void rzg2l_csi2_unregister(struct rzg2l_cru_dev *cru);
> +
> +const struct rzg2l_cru_video_format
> +*rzg2l_cru_format_from_pixel(u32 pixelformat);
> +
> +#endif
> diff --git a/drivers/media/platform/rzg2l-cru/rzg2l-csi2.c b/drivers/media/platform/rzg2l-cru/rzg2l-csi2.c
> new file mode 100644
> index 000000000000..719f3aebf77b
> --- /dev/null
> +++ b/drivers/media/platform/rzg2l-cru/rzg2l-csi2.c
> @@ -0,0 +1,625 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for Renesas RZ/G2L MIPI CSI-2 Receiver
> + *
> + * Copyright (C) 2021 Renesas Electronics Corp.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +#include <linux/sys_soc.h>
> +#include <linux/units.h>
> +
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mc.h>
> +#include <media/v4l2-subdev.h>
> +
> +#include "rzg2l-cru.h"
> +
> +/* CSI-2 LINK registers */
> +#define CSI2nMCG			0x400
> +#define CSI2nMCG_SDLN			GENMASK(11, 8)
> +
> +#define CSI2nMCT0			0x410
> +#define CSI2nMCT0_VDLN(x)		((x) << 0)
> +
> +#define CSI2nMCT2			0x418
> +#define CSI2nMCT2_FRRSKW(x)		((x) << 16)
> +#define CSI2nMCT2_FRRCLK(x)		((x) << 0)
> +
> +#define CSI2nMCT3			0x41c
> +#define CSI2nMCT3_RXEN			BIT(0)
> +
> +#define CSI2nRTCT			0x428
> +#define CSI2nRTCT_VSRST			BIT(0)
> +
> +#define CSI2nRTST			0x42c
> +#define CSI2nRTST_VSRSTS		BIT(0)
> +
> +#define CSI2nDTEL			0x460
> +
> +#define CSI2nDTEH			0x464
> +
> +/* CSI-2 D-PHY registers */
> +#define CSIDPHYCTRL0			0x800
> +#define CSIDPHYCTRL0_EN_LDO1200		BIT(1)
> +#define CSIDPHYCTRL0_EN_BGR		BIT(0)
> +
> +#define CSIDPHYTIM0			0x804
> +#define CSIDPHYTIM0_TCLK_MISS(x)	((x) << 24)
> +#define CSIDPHYTIM0_T_INIT(x)		((x) << 0)
> +
> +#define CSIDPHYTIM1			0x808
> +#define CSIDPHYTIM1_THS_PREPARE(x)	((x) << 24)
> +#define CSIDPHYTIM1_TCLK_PREPARE(x)	((x) << 16)
> +#define CSIDPHYTIM1_THS_SETTLE(x)	((x) << 8)
> +
> +#define VSRSTS_TIMEOUT_MS		100
> +#define VSRSTS_RETRIES			20
> +
> +struct timings {
> +	u32 t_init;
> +	u32 tclk_miss;
> +	u32 tclk_settle;
> +	u32 ths_settle;
> +	u32 tclk_prepare;
> +	u32 ths_prepare;
> +};
> +
> +enum dphy_timings {
> +	TRANSMISSION_RATE_80_MBPS = 0,
> +	TRANSMISSION_RATE_125_MBPS,
> +	TRANSMISSION_RATE_250_MBPS,
> +	TRANSMISSION_RATE_360_MBPS,
> +	TRANSMISSION_RATE_360_PLUS_MBPS,
> +};
> +
> +static const struct timings global_timings[] = {
> +	[TRANSMISSION_RATE_80_MBPS] = {
> +		.t_init = 79801,
> +		.tclk_miss = 4,
> +		.tclk_settle = 23,
> +		.ths_settle = 31,
> +		.tclk_prepare = 10,
> +		.ths_prepare = 19,
> +	},
> +	[TRANSMISSION_RATE_125_MBPS] = {
> +		.t_init = 79801,
> +		.tclk_miss = 4,
> +		.tclk_settle = 23,
> +		.ths_settle = 28,
> +		.tclk_prepare = 10,
> +		.ths_prepare = 19,
> +	},
> +	[TRANSMISSION_RATE_250_MBPS] = {
> +		.t_init = 79801,
> +		.tclk_miss = 4,
> +		.tclk_settle = 23,
> +		.ths_settle = 22,
> +		.tclk_prepare = 10,
> +		.ths_prepare = 16,
> +	},
> +	[TRANSMISSION_RATE_360_MBPS] = {
> +		.t_init = 79801,
> +		.tclk_miss = 4,
> +		.tclk_settle = 18,
> +		.ths_settle = 19,
> +		.tclk_prepare = 10,
> +		.ths_prepare = 10,
> +	},
> +	[TRANSMISSION_RATE_360_PLUS_MBPS] = {
> +		.t_init = 79801,
> +		.tclk_miss = 4,
> +		.tclk_settle = 18,
> +		.ths_settle = 18,
> +		.tclk_prepare = 10,
> +		.ths_prepare = 10,
> +	},
> +};
> +
> +struct rzg2l_csi2_format {
> +	u32 code;
> +	unsigned int bpp;
> +};
> +
> +static const struct rzg2l_csi2_format rzg2l_csi2_formats[] = {
> +	{ .code = MEDIA_BUS_FMT_UYVY8_2X8,	.bpp = 16 },

CSI-2 should use the _1X16 formats (it's just a convention, neither
describe exactly how data is transmitted).

> +};
> +
> +static const struct rzg2l_csi2_format *rzg2l_csi2_code_to_fmt(unsigned int code)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(rzg2l_csi2_formats); i++)
> +		if (rzg2l_csi2_formats[i].code == code)
> +			return &rzg2l_csi2_formats[i];
> +
> +	return NULL;
> +}
> +
> +static inline struct rzg2l_csi2 *sd_to_csi2(struct v4l2_subdev *sd)
> +{
> +	return container_of(sd, struct rzg2l_csi2, subdev);
> +}
> +
> +static inline struct rzg2l_csi2 *notifier_to_csi2(struct v4l2_async_notifier *n)
> +{
> +	return container_of(n, struct rzg2l_csi2, notifier);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * DPHY setting
> + */
> +
> +static int rzg2l_csi2_dphy_setting(struct rzg2l_cru_dev *cru, bool on)

I'd pass the rzg2l_csi2 pointer to the CSI-2 functions, not the
rzg2l_cru_dev pointer.

> +{
> +	struct rzg2l_csi2 *csi2 = cru->csi2;
> +	int ret = 0;
> +
> +	if (on) {
> +		struct timings dphy_timing;
> +		u32 dphytim0, dphytim1;
> +
> +		/* Release reset state */
> +		ret = reset_control_deassert(cru->cmn_restb);
> +		if (ret)
> +			return ret;
> +
> +		/* Wait until the power stabilizes */
> +		mdelay(1);
> +
> +		/* Set DPHY timing parameters */
> +		if (csi2->hsfreq <= 80)
> +			dphy_timing = global_timings[TRANSMISSION_RATE_80_MBPS];
> +		else if (csi2->hsfreq > 80 && csi2->hsfreq <= 125)
> +			dphy_timing = global_timings[TRANSMISSION_RATE_125_MBPS];
> +		else if (csi2->hsfreq > 125 && csi2->hsfreq <= 250)
> +			dphy_timing = global_timings[TRANSMISSION_RATE_250_MBPS];
> +		else if (csi2->hsfreq > 250 && csi2->hsfreq <= 360)
> +			dphy_timing = global_timings[TRANSMISSION_RATE_360_MBPS];
> +		else if (csi2->hsfreq > 360 && csi2->hsfreq <= 1500)
> +			dphy_timing = global_timings[TRANSMISSION_RATE_360_PLUS_MBPS];
> +		else
> +			return -EINVAL;
> +
> +		dphytim0 = CSIDPHYTIM0_TCLK_MISS(dphy_timing.tclk_miss) |
> +			   CSIDPHYTIM0_T_INIT(dphy_timing.t_init);
> +		dphytim1 = CSIDPHYTIM1_THS_PREPARE(dphy_timing.ths_prepare) |
> +			   CSIDPHYTIM1_TCLK_PREPARE(dphy_timing.tclk_prepare) |
> +			   CSIDPHYTIM1_THS_SETTLE(dphy_timing.ths_settle) |
> +			   CSIDPHYTIM1_THS_SETTLE(dphy_timing.tclk_settle);
> +
> +		rzg2l_cru_write(cru, CSIDPHYTIM0, dphytim0);
> +		rzg2l_cru_write(cru, CSIDPHYTIM1, dphytim1);
> +
> +		/* Set the EN_BGR bit */
> +		rzg2l_cru_set(cru, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_BGR);
> +
> +		/* Delay 20us to be stable */
> +		usleep_range(20, 40);
> +
> +		/* Set the EN_LDO1200 bit */
> +		rzg2l_cru_set(cru, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_LDO1200);
> +
> +		/* Delay 10us to be stable */
> +		usleep_range(10, 20);
> +	} else {
> +		/* Cancel the EN_LDO1200 register setting */
> +		rzg2l_cru_clr(cru, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_LDO1200);
> +
> +		/* Cancel the EN_BGR register setting */
> +		rzg2l_cru_clr(cru, CSIDPHYCTRL0, CSIDPHYCTRL0_EN_BGR);
> +
> +		/* Set reset state */
> +		reset_control_assert(cru->cmn_restb);
> +	}
> +
> +	return ret;
> +}
> +
> +static int rzg2l_csi2_calc_mbps(struct rzg2l_csi2 *csi2, unsigned int bpp)
> +{
> +	struct v4l2_subdev *source;
> +	struct v4l2_ctrl *ctrl;
> +	u64 mbps;
> +
> +	if (!csi2->remote)
> +		return -ENODEV;
> +
> +	source = csi2->remote;
> +
> +	/* Read the pixel rate control from remote. */
> +	ctrl = v4l2_ctrl_find(source->ctrl_handler, V4L2_CID_PIXEL_RATE);
> +	if (!ctrl) {
> +		dev_err(csi2->dev, "no pixel rate control in subdev %s\n",
> +			source->name);
> +		return -EINVAL;
> +	}
> +
> +	/*
> +	 * Calculate hsfreq in Mbps
> +	 * hsfreq = (pixel_rate * bits_per_sample) / number_of_lanes
> +	 */
> +	mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * bpp;
> +	do_div(mbps, csi2->lanes * 1000000);
> +
> +	return mbps;
> +}
> +
> +static void rzg2l_csi2_stop(struct rzg2l_cru_dev *cru)
> +{
> +	unsigned int timeout = VSRSTS_RETRIES;
> +	struct rzg2l_csi2 *csi2 = cru->csi2;
> +
> +	/* Stop DPHY reception */
> +	rzg2l_csi2_dphy_setting(cru, 0);
> +
> +	/* Stop LINK reception */
> +	rzg2l_cru_clr(cru, CSI2nMCT3, CSI2nMCT3_RXEN);
> +
> +	/* Request a software reset of the LINK Video Pixel Interface */
> +	rzg2l_cru_write(cru, CSI2nRTCT, CSI2nRTCT_VSRST);
> +
> +	while (timeout--) {
> +		/* Make sure that the execution status is not during a reset */
> +		if (!(rzg2l_cru_read(cru, CSI2nRTST) & CSI2nRTST_VSRSTS))
> +			break;
> +		msleep(VSRSTS_TIMEOUT_MS);
> +	};
> +	if (!timeout)
> +		dev_err(csi2->dev, "CSI2nRTCT_VSRST bit is not cleared\n");
> +}
> +
> +static int rzg2l_csi2_start(struct rzg2l_cru_dev *cru)
> +{
> +	unsigned long vclk_rate = clk_get_rate(cru->vclk);
> +	const struct rzg2l_csi2_format *format;
> +	struct rzg2l_csi2 *csi2 = cru->csi2;
> +	int lanes, mbps, ret;
> +	u32 frrskw, frrclk;
> +
> +	dev_dbg(cru->dev, "Input size (%ux%u%c)\n",
> +		csi2->mf.width, csi2->mf.height,
> +		csi2->mf.field == V4L2_FIELD_NONE ? 'p' : 'i');
> +
> +	/* Code is validated in set_fmt. */
> +	format = rzg2l_csi2_code_to_fmt(csi2->mf.code);
> +
> +	/* Checking the maximum lanes support for CSI2 module */
> +	lanes = (rzg2l_cru_read(cru, CSI2nMCG) & CSI2nMCG_SDLN) >> 8;
> +	if (lanes < csi2->lanes) {
> +		dev_err(csi2->dev,
> +			"Failed to support %d data lanes\n", csi2->lanes);
> +		return -EINVAL;
> +	}
> +
> +	mbps = rzg2l_csi2_calc_mbps(csi2, format->bpp);
> +	if (mbps < 0)
> +		return mbps;
> +
> +	csi2->hsfreq = mbps;
> +
> +	/* Initialize DPHY */
> +	ret = rzg2l_csi2_dphy_setting(cru, 1);
> +	if (ret) {
> +		rzg2l_csi2_dphy_setting(cru, 0);
> +		return ret;
> +	}
> +
> +	rzg2l_cru_write(cru, CSI2nMCT0, CSI2nMCT0_VDLN(csi2->lanes));
> +
> +	vclk_rate = vclk_rate / HZ_PER_MHZ;
> +	frrskw = (3 * vclk_rate * 8) / csi2->hsfreq;
> +	frrclk = frrskw / 2;
> +	rzg2l_cru_write(cru, CSI2nMCT2,
> +			CSI2nMCT2_FRRSKW(frrskw + 1) | CSI2nMCT2_FRRCLK(frrclk + 1));
> +
> +	/* Select data type. */
> +	rzg2l_cru_write(cru, CSI2nDTEL, 0xf778ff0f);
> +	rzg2l_cru_write(cru, CSI2nDTEH, 0x00ffff1f);
> +
> +	/* Enable LINK reception */
> +	rzg2l_cru_set(cru, CSI2nMCT3, CSI2nMCT3_RXEN);
> +
> +	return 0;
> +}
> +
> +static int rzg2l_csi2_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct rzg2l_cru_dev *cru = v4l2_get_subdevdata(sd);
> +	struct rzg2l_csi2 *csi2 = cru->csi2;
> +	int ret = 0;
> +
> +	mutex_lock(&csi2->lock);
> +
> +	if (!csi2->remote) {
> +		ret = -ENODEV;
> +		goto out;
> +	}
> +
> +	if (enable && csi2->stream_count == 0) {
> +		ret = rzg2l_csi2_start(cru);
> +		if (ret)
> +			goto out;
> +
> +		ret = v4l2_subdev_call(csi2->remote, video, s_stream, 1);
> +		if (ret) {
> +			rzg2l_csi2_stop(cru);
> +			goto out;
> +		}
> +	} else if (!enable && csi2->stream_count == 1) {
> +		v4l2_subdev_call(csi2->remote, video, s_stream, 0);
> +		rzg2l_csi2_stop(cru);
> +	}
> +
> +	csi2->stream_count += enable ? 1 : -1;
> +out:
> +	mutex_unlock(&csi2->lock);
> +
> +	return ret;
> +}
> +
> +static int rzg2l_cru_set_pad_format(struct v4l2_subdev *sd,

s/cru/csi2/

> +				     struct v4l2_subdev_state *sd_state,
> +				     struct v4l2_subdev_format *format)
> +{
> +	struct rzg2l_csi2 *csi2 = sd_to_csi2(sd);
> +	struct v4l2_mbus_framefmt *framefmt;
> +
> +	mutex_lock(&csi2->lock);
> +
> +	if (!rzg2l_csi2_code_to_fmt(format->format.code))
> +		format->format.code = rzg2l_csi2_formats[0].code;
> +
> +	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> +		csi2->mf = format->format;
> +	} else {
> +		framefmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
> +		*framefmt = format->format;
> +	}
> +
> +	mutex_unlock(&csi2->lock);
> +
> +	return 0;
> +}
> +
> +static int rzg2l_csi2_get_pad_format(struct v4l2_subdev *sd,
> +				     struct v4l2_subdev_state *sd_state,
> +				     struct v4l2_subdev_format *format)
> +{
> +	struct rzg2l_csi2 *csi2 = sd_to_csi2(sd);
> +
> +	mutex_lock(&csi2->lock);
> +	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> +		format->format = csi2->mf;
> +	else
> +		format->format = *v4l2_subdev_get_try_format(sd, sd_state, 0);
> +	mutex_unlock(&csi2->lock);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_video_ops rzg2l_csi2_video_ops = {
> +	.s_stream = rzg2l_csi2_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops rzg2l_csi2_pad_ops = {

Could you please also implement .init_cfg() ?

> +	.set_fmt = rzg2l_cru_set_pad_format,
> +	.get_fmt = rzg2l_csi2_get_pad_format,
> +};
> +
> +static const struct v4l2_subdev_ops rzg2l_csi2_subdev_ops = {
> +	.video	= &rzg2l_csi2_video_ops,
> +	.pad	= &rzg2l_csi2_pad_ops,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Async handling and registration of subdevices and links.
> + */
> +
> +static int rzg2l_csi2_notify_bound(struct v4l2_async_notifier *notifier,
> +				   struct v4l2_subdev *subdev,
> +				   struct v4l2_async_subdev *asd)
> +{
> +	struct rzg2l_csi2 *csi2 = notifier_to_csi2(notifier);
> +	int pad;
> +
> +	pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
> +					  MEDIA_PAD_FL_SOURCE);
> +	if (pad < 0) {
> +		dev_err(csi2->dev, "Failed to find pad for %s\n", subdev->name);
> +		return pad;
> +	}
> +
> +	csi2->remote = subdev;
> +
> +	dev_dbg(csi2->dev, "Bound %s pad: %d\n", subdev->name, pad);
> +
> +	return media_create_pad_link(&subdev->entity, pad,
> +				     &csi2->subdev.entity, 0,
> +				     MEDIA_LNK_FL_ENABLED |
> +				     MEDIA_LNK_FL_IMMUTABLE);
> +}
> +
> +static void rzg2l_csi2_notify_unbind(struct v4l2_async_notifier *notifier,
> +				     struct v4l2_subdev *subdev,
> +				     struct v4l2_async_subdev *asd)
> +{
> +	struct rzg2l_csi2 *csi2 = notifier_to_csi2(notifier);
> +
> +	csi2->remote = NULL;
> +
> +	dev_dbg(csi2->dev, "Unbind %s\n", subdev->name);
> +}
> +
> +static const struct v4l2_async_notifier_operations rzg2l_csi2_notify_ops = {
> +	.bound = rzg2l_csi2_notify_bound,
> +	.unbind = rzg2l_csi2_notify_unbind,
> +};
> +
> +static int rzg2l_csi2_parse_v4l2(struct rzg2l_cru_dev *cru,
> +				 struct rzg2l_csi2 *csi2,
> +				 struct v4l2_fwnode_endpoint *vep)
> +{
> +	/* Only port 1 endpoint 0 is valid. */
> +	if (vep->base.port != 1 || vep->base.id)
> +		return -ENOTCONN;
> +
> +	if (vep->bus_type != V4L2_MBUS_CSI2_DPHY) {
> +		dev_err(cru->dev, "Unsupported bus: %u\n", vep->bus_type);
> +		return -EINVAL;
> +	}
> +
> +	csi2->lanes = vep->bus.mipi_csi2.num_data_lanes;
> +	if (csi2->lanes != 1 && csi2->lanes != 2 && csi2->lanes != 4) {
> +		dev_err(cru->dev, "Unsupported number of data-lanes: %u\n",
> +			csi2->lanes);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int rzg2l_csi2_parse_dt(struct rzg2l_cru_dev *cru,
> +			       struct rzg2l_csi2 *csi2)
> +{
> +	struct v4l2_fwnode_endpoint v4l2_ep = {
> +		.bus_type = V4L2_MBUS_CSI2_DPHY
> +	};
> +	struct v4l2_async_subdev *asd;
> +	struct fwnode_handle *fwnode;
> +	struct fwnode_handle *ep;
> +	int ret;
> +
> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(cru->dev), 1, 0, 0);
> +	if (!ep) {
> +		dev_err(cru->dev, "Not connected to subdevice\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = v4l2_fwnode_endpoint_parse(ep, &v4l2_ep);
> +	if (ret) {
> +		dev_err(cru->dev, "Could not parse v4l2 endpoint\n");
> +		fwnode_handle_put(ep);
> +		return -EINVAL;
> +	}
> +
> +	ret = rzg2l_csi2_parse_v4l2(cru, csi2, &v4l2_ep);
> +	if (ret) {
> +		fwnode_handle_put(ep);
> +		return ret;
> +	}
> +
> +	fwnode = fwnode_graph_get_remote_endpoint(ep);
> +	fwnode_handle_put(ep);
> +
> +	dev_dbg(cru->dev, "Found '%pOF'\n", to_of_node(fwnode));
> +
> +	v4l2_async_nf_init(&csi2->notifier);
> +	csi2->notifier.ops = &rzg2l_csi2_notify_ops;
> +
> +	asd = v4l2_async_nf_add_fwnode(&csi2->notifier, fwnode,
> +				       struct v4l2_async_subdev);
> +	fwnode_handle_put(fwnode);
> +	if (IS_ERR(asd))
> +		return PTR_ERR(asd);
> +
> +	ret = v4l2_async_subdev_nf_register(&csi2->subdev, &csi2->notifier);
> +	if (ret)
> +		v4l2_async_nf_cleanup(&csi2->notifier);
> +
> +	return ret;
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Platform Device Driver.
> + */
> +
> +static const struct media_entity_operations rzg2l_csi2_entity_ops = {
> +	.link_validate = v4l2_subdev_link_validate,
> +};
> +
> +int rzg2l_csi2_register(struct rzg2l_cru_dev *cru)
> +{
> +	struct device *dev = cru->dev;
> +	struct rzg2l_csi2 *csi2;
> +	unsigned int i;
> +	int ret;
> +
> +	csi2 = devm_kzalloc(dev, sizeof(*csi2), GFP_KERNEL);
> +	if (!csi2)
> +		return -ENOMEM;
> +
> +	csi2->dev = dev;
> +	cru->csi2 = csi2;
> +
> +	mutex_init(&csi2->lock);
> +	csi2->stream_count = 0;
> +
> +	ret = rzg2l_csi2_parse_dt(cru, csi2);
> +	if (ret)
> +		goto error_mutex;
> +
> +	csi2->subdev.owner = THIS_MODULE;
> +	csi2->subdev.dev = dev;
> +	v4l2_subdev_init(&csi2->subdev, &rzg2l_csi2_subdev_ops);
> +	v4l2_set_subdevdata(&csi2->subdev, cru);
> +	snprintf(csi2->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s %s",
> +		 KBUILD_MODNAME, dev_name(dev));
> +	csi2->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
> +
> +	csi2->subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
> +	csi2->subdev.entity.ops = &rzg2l_csi2_entity_ops;
> +
> +	csi2->pads[RZG2L_CSI2_SINK].flags = MEDIA_PAD_FL_SINK;
> +	for (i = RZG2L_CSI2_SOURCE_VC0; i < NR_OF_RZG2L_CSI2_PAD; i++)
> +		csi2->pads[i].flags = MEDIA_PAD_FL_SOURCE;
> +
> +	ret = media_entity_pads_init(&csi2->subdev.entity, NR_OF_RZG2L_CSI2_PAD,
> +				     csi2->pads);
> +	if (ret)
> +		goto error_async;
> +
> +	ret = v4l2_async_register_subdev(&csi2->subdev);
> +	if (ret < 0)
> +		goto error_async;
> +
> +	dev_info(dev, "%d lanes found\n", csi2->lanes);
> +
> +	return 0;
> +
> +error_async:
> +	v4l2_async_nf_unregister(&csi2->notifier);
> +	v4l2_async_nf_cleanup(&csi2->notifier);
> +error_mutex:
> +	mutex_destroy(&csi2->lock);
> +
> +	return ret;
> +}
> +
> +void rzg2l_csi2_unregister(struct rzg2l_cru_dev *cru)
> +{
> +	struct rzg2l_csi2 *csi2;
> +
> +	if (!cru->csi2)
> +		return;
> +
> +	csi2 = cru->csi2;
> +
> +	v4l2_async_nf_unregister(&csi2->notifier);
> +	v4l2_async_nf_cleanup(&csi2->notifier);
> +	v4l2_async_unregister_subdev(&csi2->subdev);
> +
> +	mutex_destroy(&csi2->lock);
> +}

[snip]

> diff --git a/drivers/media/platform/rzg2l-cru/rzg2l-v4l2.c b/drivers/media/platform/rzg2l-cru/rzg2l-v4l2.c
> new file mode 100644
> index 000000000000..e47f050abba8
> --- /dev/null
> +++ b/drivers/media/platform/rzg2l-cru/rzg2l-v4l2.c
> @@ -0,0 +1,361 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Driver for Renesas RZ/G2L CRU
> + *
> + * Copyright (C) 2021 Renesas Electronics Corp.
> + *
> + * Based on Renesas R-Car VIN
> + * Copyright (C) 2016 Renesas Electronics Corp.
> + * Copyright (C) 2011-2013 Renesas Solutions Corp.
> + * Copyright (C) 2013 Cogent Embedded, Inc., <source@xxxxxxxxxxxxxxxxxx>
> + * Copyright (C) 2008 Magnus Damm
> + */
> +
> +#include <linux/pm_runtime.h>
> +
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/v4l2-mc.h>
> +#include <media/v4l2-rect.h>
> +
> +#include "rzg2l-cru.h"
> +
> +#define RZG2L_CRU_DEFAULT_FORMAT	V4L2_PIX_FMT_UYVY
> +#define RZG2L_CRU_DEFAULT_WIDTH		800
> +#define RZG2L_CRU_DEFAULT_HEIGHT	600
> +#define RZG2L_CRU_DEFAULT_FIELD		V4L2_FIELD_NONE
> +#define RZG2L_CRU_DEFAULT_COLORSPACE	V4L2_COLORSPACE_SRGB
> +
> +/* -----------------------------------------------------------------------------
> + * Format Conversions
> + */
> +
> +static const struct rzg2l_cru_video_format rzg2l_cru_formats[] = {
> +	{
> +		.fourcc			= V4L2_PIX_FMT_UYVY,
> +		.bpp			= 2,
> +	},
> +};
> +
> +const struct rzg2l_cru_video_format
> +*rzg2l_cru_format_from_pixel(u32 pixelformat)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(rzg2l_cru_formats); i++)
> +		if (rzg2l_cru_formats[i].fourcc == pixelformat)
> +			return rzg2l_cru_formats + i;
> +
> +	return NULL;
> +}
> +
> +static u32 rzg2l_cru_format_bytesperline(struct v4l2_pix_format *pix)
> +{
> +	const struct rzg2l_cru_video_format *fmt;
> +
> +	fmt = rzg2l_cru_format_from_pixel(pix->pixelformat);
> +
> +	if (WARN_ON(!fmt))
> +		return -EINVAL;
> +
> +	return pix->width * fmt->bpp;
> +}
> +
> +static u32 rzg2l_cru_format_sizeimage(struct v4l2_pix_format *pix)
> +{
> +	return pix->bytesperline * pix->height;
> +}
> +
> +static void rzg2l_cru_format_align(struct rzg2l_cru_dev *cru,
> +				   struct v4l2_pix_format *pix)
> +{
> +	if (!rzg2l_cru_format_from_pixel(pix->pixelformat))
> +		pix->pixelformat = RZG2L_CRU_DEFAULT_FORMAT;
> +
> +	switch (pix->field) {
> +	case V4L2_FIELD_TOP:
> +	case V4L2_FIELD_BOTTOM:
> +	case V4L2_FIELD_NONE:
> +	case V4L2_FIELD_INTERLACED_TB:
> +	case V4L2_FIELD_INTERLACED_BT:
> +	case V4L2_FIELD_INTERLACED:
> +		break;
> +	default:
> +		pix->field = RZG2L_CRU_DEFAULT_FIELD;
> +		break;
> +	}
> +
> +	/* Limit to CRU capabilities */
> +	v4l_bound_align_image(&pix->width, 320, cru->info->max_width, 1,
> +			      &pix->height, 240, cru->info->max_height, 2, 0);
> +
> +	pix->bytesperline = rzg2l_cru_format_bytesperline(pix);
> +	pix->sizeimage = rzg2l_cru_format_sizeimage(pix);
> +
> +	cru_dbg(cru, "Format %ux%u bpl: %u size: %u\n",
> +		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> +}
> +
> +static void rzg2l_cru_mc_try_format(struct rzg2l_cru_dev *cru,
> +				    struct v4l2_pix_format *pix)
> +{
> +	/*
> +	 * The V4L2 specification clearly documents the colorspace fields
> +	 * as being set by drivers for capture devices. Using the values
> +	 * supplied by userspace thus wouldn't comply with the API. Until
> +	 * the API is updated force fixed values.
> +	 */
> +	pix->colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
> +	pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace);
> +	pix->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix->colorspace);
> +	pix->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, pix->colorspace,
> +							  pix->ycbcr_enc);
> +
> +	rzg2l_cru_format_align(cru, pix);
> +}
> +
> +static int rzg2l_cru_querycap(struct file *file, void *priv,
> +			      struct v4l2_capability *cap)
> +{
> +	struct rzg2l_cru_dev *cru = video_drvdata(file);
> +
> +	strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
> +	strscpy(cap->card, "RZG2L_CRU", sizeof(cap->card));
> +	snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
> +		 dev_name(cru->dev));
> +	return 0;
> +}
> +
> +static int rzg2l_cru_mc_try_fmt_vid_cap(struct file *file, void *priv,
> +					struct v4l2_format *f)
> +{
> +	struct rzg2l_cru_dev *cru = video_drvdata(file);
> +
> +	rzg2l_cru_mc_try_format(cru, &f->fmt.pix);
> +
> +	return 0;
> +}
> +
> +static int rzg2l_cru_mc_s_fmt_vid_cap(struct file *file, void *priv,
> +				      struct v4l2_format *f)
> +{
> +	struct rzg2l_cru_dev *cru = video_drvdata(file);
> +
> +	if (vb2_is_busy(&cru->queue))
> +		return -EBUSY;
> +
> +	rzg2l_cru_mc_try_format(cru, &f->fmt.pix);
> +
> +	cru->format = f->fmt.pix;
> +
> +	cru->compose.top = 0;
> +	cru->compose.left = 0;
> +	cru->compose.width = cru->format.width;
> +	cru->compose.height = cru->format.height;
> +
> +	return 0;
> +}
> +
> +static int rzg2l_cru_g_fmt_vid_cap(struct file *file, void *priv,
> +				   struct v4l2_format *f)
> +{
> +	struct rzg2l_cru_dev *cru = video_drvdata(file);
> +
> +	f->fmt.pix = cru->format;
> +
> +	return 0;
> +}
> +
> +static int rzg2l_cru_enum_fmt_vid_cap(struct file *file, void *priv,
> +				      struct v4l2_fmtdesc *f)
> +{
> +	if (f->index >= ARRAY_SIZE(rzg2l_cru_formats))
> +		return -EINVAL;
> +
> +	f->pixelformat = rzg2l_cru_formats[f->index].fourcc;
> +
> +	return 0;
> +}
> +
> +static int rzg2l_cru_subscribe_event(struct v4l2_fh *fh,
> +				     const struct v4l2_event_subscription *sub)
> +{
> +	switch (sub->type) {
> +	case V4L2_EVENT_SOURCE_CHANGE:
> +		return v4l2_event_subscribe(fh, sub, 4, NULL);
> +	}
> +	return v4l2_ctrl_subscribe_event(fh, sub);
> +}
> +
> +static const struct v4l2_ioctl_ops rzg2l_cru_mc_ioctl_ops = {
> +	.vidioc_querycap		= rzg2l_cru_querycap,
> +	.vidioc_try_fmt_vid_cap		= rzg2l_cru_mc_try_fmt_vid_cap,

No need for "mc_" in the function name.

> +	.vidioc_g_fmt_vid_cap		= rzg2l_cru_g_fmt_vid_cap,
> +	.vidioc_s_fmt_vid_cap		= rzg2l_cru_mc_s_fmt_vid_cap,
> +	.vidioc_enum_fmt_vid_cap	= rzg2l_cru_enum_fmt_vid_cap,
> +
> +	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
> +	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
> +	.vidioc_querybuf		= vb2_ioctl_querybuf,
> +	.vidioc_qbuf			= vb2_ioctl_qbuf,
> +	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
> +	.vidioc_expbuf			= vb2_ioctl_expbuf,
> +	.vidioc_prepare_buf		= vb2_ioctl_prepare_buf,
> +	.vidioc_streamon		= vb2_ioctl_streamon,
> +	.vidioc_streamoff		= vb2_ioctl_streamoff,
> +
> +	.vidioc_log_status		= v4l2_ctrl_log_status,
> +	.vidioc_subscribe_event		= rzg2l_cru_subscribe_event,
> +	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Media controller file operations
> + */
> +
> +static int rzg2l_cru_open(struct file *file)
> +{
> +	struct rzg2l_cru_dev *cru = video_drvdata(file);
> +	int ret;
> +
> +	ret = pm_runtime_resume_and_get(cru->dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = mutex_lock_interruptible(&cru->lock);
> +	if (ret)
> +		goto err_pm;
> +
> +	file->private_data = cru;
> +	ret = v4l2_fh_open(file);
> +	if (ret)
> +		goto err_unlock;
> +
> +	ret = v4l2_pipeline_pm_get(&cru->vdev.entity);
> +	if (ret < 0)
> +		goto err_open;
> +
> +	ret = v4l2_ctrl_handler_setup(&cru->ctrl_handler);
> +	if (ret)
> +		goto err_power;
> +
> +	mutex_unlock(&cru->lock);
> +
> +	return 0;
> +err_power:
> +	v4l2_pipeline_pm_put(&cru->vdev.entity);
> +err_open:
> +	v4l2_fh_release(file);
> +err_unlock:
> +	mutex_unlock(&cru->lock);
> +err_pm:
> +	pm_runtime_put(cru->dev);
> +
> +	return ret;
> +}
> +
> +static int rzg2l_cru_release(struct file *file)
> +{
> +	struct rzg2l_cru_dev *cru = video_drvdata(file);
> +	int ret;
> +
> +	mutex_lock(&cru->lock);
> +
> +	/* the release helper will cleanup any on-going streaming. */
> +	ret = _vb2_fop_release(file, NULL);
> +
> +	v4l2_pipeline_pm_put(&cru->vdev.entity);
> +	pm_runtime_put(cru->dev);
> +
> +	mutex_unlock(&cru->lock);
> +
> +	return ret;
> +}
> +
> +static const struct v4l2_file_operations rzg2l_cru_mc_fops = {
> +	.owner		= THIS_MODULE,
> +	.unlocked_ioctl	= video_ioctl2,
> +	.open		= rzg2l_cru_open,
> +	.release	= rzg2l_cru_release,
> +	.poll		= vb2_fop_poll,
> +	.mmap		= vb2_fop_mmap,
> +	.read		= vb2_fop_read,
> +};
> +
> +void rzg2l_cru_v4l2_unregister(struct rzg2l_cru_dev *cru)
> +{
> +	if (!video_is_registered(&cru->vdev))
> +		return;
> +
> +	v4l2_info(&cru->v4l2_dev, "Removed %s\n",
> +		  video_device_node_name(&cru->vdev));
> +
> +	/* Checks internally if vdev have been init or not */
> +	video_unregister_device(&cru->vdev);
> +}
> +
> +static void rzg2l_cru_notify(struct v4l2_subdev *sd,
> +			     unsigned int notification, void *arg)
> +{
> +	struct rzg2l_cru_dev *cru =
> +		container_of(sd->v4l2_dev, struct rzg2l_cru_dev, v4l2_dev);
> +	struct v4l2_subdev *remote;
> +	struct media_pad *pad;
> +
> +	pad = media_entity_remote_pad(&cru->pad);
> +	if (!pad)
> +		return;
> +
> +	remote = media_entity_to_v4l2_subdev(pad->entity);
> +	if (remote != sd)
> +		return;
> +
> +	switch (notification) {
> +	case V4L2_DEVICE_NOTIFY_EVENT:
> +		v4l2_event_queue(&cru->vdev, arg);
> +		break;
> +	}
> +}
> +
> +int rzg2l_cru_v4l2_register(struct rzg2l_cru_dev *cru)
> +{
> +	struct video_device *vdev = &cru->vdev;
> +	int ret;
> +
> +	cru->v4l2_dev.notify = rzg2l_cru_notify;
> +
> +	/* video node */
> +	vdev->v4l2_dev = &cru->v4l2_dev;
> +	vdev->queue = &cru->queue;
> +	snprintf(vdev->name, sizeof(vdev->name), "CRU output");
> +	vdev->release = video_device_release_empty;
> +	vdev->lock = &cru->lock;
> +	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
> +			    V4L2_CAP_READWRITE;
> +
> +	/* Set a default format */
> +	cru->format.pixelformat	= RZG2L_CRU_DEFAULT_FORMAT;
> +	cru->format.width = RZG2L_CRU_DEFAULT_WIDTH;
> +	cru->format.height = RZG2L_CRU_DEFAULT_HEIGHT;
> +	cru->format.field = RZG2L_CRU_DEFAULT_FIELD;
> +	cru->format.colorspace = RZG2L_CRU_DEFAULT_COLORSPACE;
> +
> +	vdev->device_caps |= V4L2_CAP_IO_MC;
> +	vdev->fops = &rzg2l_cru_mc_fops;
> +	vdev->ioctl_ops = &rzg2l_cru_mc_ioctl_ops;
> +
> +	rzg2l_cru_format_align(cru, &cru->format);
> +
> +	ret = video_register_device(&cru->vdev, VFL_TYPE_VIDEO, -1);
> +	if (ret) {
> +		cru_err(cru, "Failed to register video device\n");
> +		return ret;
> +	}
> +
> +	video_set_drvdata(&cru->vdev, cru);
> +
> +	v4l2_info(&cru->v4l2_dev, "Device registered as %s\n",
> +		  video_device_node_name(&cru->vdev));
> +
> +	return ret;
> +}

-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux