Re: Generic communication of boot loader state to the OS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Aug 26, 2014 at 2:28 PM, Russell King - ARM Linux
<linux@xxxxxxxxxxxxxxxx> wrote:
> On Tue, Aug 26, 2014 at 12:10:00PM -0400, jonsmirl@xxxxxxxxx wrote:
>> As a side effect this will eliminate the need for kernel command line
>> parameters describing boot state. Like console="". Over time it might
>> even be able to pass a DHCP IP address from uboot into the kernel.
>
> Err no.  Don't even think about that.  DHCP may be wonderful and all,
> but there's a fundamental issue with it: entries time out unless they
> are renewed.
>
> Why is that a problem?  Well, take a DHCP server which hands out
> dynamic addresses, and updates the DNS.  When the lease expires, it
> tears down the DNS entry.
>
> Now take a target booting using DHCP in uboot, which then mounts its
> root NFS.  If it tries to startup a DHCP client, the first thing the
> DHCP client does is to clean up the interface... resulting in it
> killing the root NFS connection.  If that doesn't happen, then you
> end up with a problem at shutdown, because DHCP clients always
> deconfigure the interface when they're killed off - resulting in
> "reboot" not being functional.

I run the same configuration  -  uboot in flash, tftp to load kernel,
nfs mount the root. And I do reboot fifty times a day too.  I just put
everything on static IPs to avoid problems.

Would this work if the DHCP client was notified that there already was
an IP lease in place?  It could remember that lease and then be
responsible for setting it into the interface and renewing it. Right
now there is no way to pass this information.

Doesn't the DHCP client do the wrong thing simply because it lacks the
info to do something better?

>
> Here, I run exactly that setup, and I have found that ubuntu suffers
> quite a bit from problems if you don't tell it to keep its fingers
> off the ethernet device configuration when running root-NFS - and
> believe me, when I'm working on something, I probably do several
> tens of remote reboots of targets via "reboot" - I know I've done
> about fifty today so far (many of them having to resort to the reset
> button because the kernel seems to be locking up rather than rebooting
> at the final stage.)
>
> --
> FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up
> according to speedtest.net.



-- 
Jon Smirl
jonsmirl@xxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux