Hello Pali, > On Thursday 30 September 2021 11:58:32 Pali Rohár wrote: >> This patch series add support for baudrates higher than 230400 on >> Marvell Armada 37xx boards. > > Stephen, Gregory, are there any issues with this patch series? I am not found of these changes but let's apply it as I didn't take time to do a better review. However I can't apply the dt part if the driver is not merged. Gregory > If not, could you take them? > >> Changes in v7: >> * fixed lint errors in yaml binding file >> >> Changes in v6: >> * fixed yaml binding file and dts files >> >> Changes in v5: >> * fixed yaml binding file >> >> Changes in v4: >> * converted armada3700-uart-clock documentation to YAML >> * split documentation changes into two commits: >> - first which adds clock documentation >> - second which updates UART documentation >> >> Changes in v3: >> v3 is rebased on top of Linus master branch and all already applied patches >> were dropped. There are no changes in patches itself since v2. >> >> Pali Rohár (6): >> math64: New DIV_U64_ROUND_CLOSEST helper >> serial: mvebu-uart: implement UART clock driver for configuring UART >> base clock >> dt-bindings: mvebu-uart: document DT bindings for >> marvell,armada-3700-uart-clock >> dt-bindings: mvebu-uart: update information about UART clock >> arm64: dts: marvell: armada-37xx: add device node for UART clock and >> use it >> serial: mvebu-uart: implement support for baudrates higher than 230400 >> >> .../clock/marvell,armada-3700-uart-clock.yaml | 59 ++ >> .../devicetree/bindings/serial/mvebu-uart.txt | 9 +- >> arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 14 +- >> drivers/tty/serial/Kconfig | 1 + >> drivers/tty/serial/mvebu-uart.c | 592 +++++++++++++++++- >> include/linux/math64.h | 13 + >> 6 files changed, 667 insertions(+), 21 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml >> >> -- >> 2.20.1 >> -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com
