This patch series extends lan966x with switchdev and vlan support.
The first patches just adds new registers and extend the MAC table to
handle the interrupts when a new address is learn/forget.
v6->v7:
- fix build issues when compiling as a module
v5->v6:
- fix issues with the singletones, they were not really singletons
- simplify the case where lan966x ports are added to bridges with foreign
ports
- drop the cases NETDEV_PRE_UP and NETDEV_DOWN
- fix the change of MAC address
- drop the callbacks .ndo_set_features, .ndo_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid
- remove duplicate code when port was added in a vlan, the MAC entries
will be added by the fdb
v4->v5:
- make the notifier_block from lan966x to be singletones
- use switchdev_handle_port_obj_add and switchdev_handle_fdb_event_to_device
when getting callbacks in the lan966x
- merge the two vlan patches in a single one
v3->v4:
- split the last patch in multiple patches
- replace spin_lock_irqsave/restore with spin_lock/spin_unlock
- remove lan966x_port_change_rx_flags because it was copying all the frames to
the CPU instead of removing all RX filters.
- implement SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS
- remove calls to __dev_mc_unsync/sync as they are not needed
- replace 0/1 with false/true
- make sure that the lan966x ports are not added to bridges that have other
interfaces except lan966x
- and allow the lan966x ports to be part of only the same bridge.
v2->v3:
- separate the PVID used when the port is in host mode or vlan unaware
- fix issue when the port was leaving the bridge
v1->v2:
- when allocating entries for the mac table use kzalloc instead of
devm_kzalloc
- also use GFP_KERNEL instead of GFP_ATOMIC, because is never called
in atomic context
- when deleting an mac table entry, the order of operations was wrong
- if ana irq is enabled make sure it gets disabled when the driver is
removed
Horatiu Vultur (9):
net: lan966x: Add registers that are used for switch and vlan
functionality
dt-bindings: net: lan966x: Extend with the analyzer interrupt
net: lan966x: add support for interrupts from analyzer
net: lan966x: More MAC table functionality
net: lan966x: Remove .ndo_change_rx_flags
net: lan966x: Add support to offload the forwarding.
net: lan966x: Add vlan support.
net: lan966x: Extend switchdev bridge flags
net: lan966x: Extend switchdev with fdb support
.../net/microchip,lan966x-switch.yaml | 2 +
.../net/ethernet/microchip/lan966x/Kconfig | 1 +
.../net/ethernet/microchip/lan966x/Makefile | 3 +-
.../ethernet/microchip/lan966x/lan966x_fdb.c | 244 +++++++++
.../ethernet/microchip/lan966x/lan966x_mac.c | 342 +++++++++++++
.../ethernet/microchip/lan966x/lan966x_main.c | 103 +++-
.../ethernet/microchip/lan966x/lan966x_main.h | 64 ++-
.../ethernet/microchip/lan966x/lan966x_regs.h | 129 +++++
.../microchip/lan966x/lan966x_switchdev.c | 468 ++++++++++++++++++
.../ethernet/microchip/lan966x/lan966x_vlan.c | 312 ++++++++++++
10 files changed, 1639 insertions(+), 29 deletions(-)
create mode 100644 drivers/net/ethernet/microchip/lan966x/lan966x_fdb.c
create mode 100644 drivers/net/ethernet/microchip/lan966x/lan966x_switchdev.c
create mode 100644 drivers/net/ethernet/microchip/lan966x/lan966x_vlan.c
--
2.33.0
