From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> Add the USB3 bindings for Kirin 970 phy and Hikey 970 board. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> --- See [PATCH v2 0/7] at: https://lore.kernel.org/all/cover.1639735742.git.mchehab@xxxxxxxxxx/ .../boot/dts/hisilicon/hi3670-hikey970.dts | 83 +++++++++++++++++++ arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 56 +++++++++++++ 2 files changed, 139 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts index 7c32f5fd5cc5..60594db07041 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -430,3 +430,86 @@ &uart6 { label = "LS-UART1"; status = "okay"; }; + +&usb_phy { + phy-supply = <&ldo17>; +}; + +&i2c1 { + status = "okay"; + + rt1711h: rt1711h@4e { + compatible = "richtek,rt1711h"; + reg = <0x4e>; + status = "okay"; + interrupt-parent = <&gpio27>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_cfg_func>; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 5000, 1000)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + usb_con_ss: endpoint { + remote-endpoint = <&dwc3_ss>; + }; + }; + }; + }; + port { + #address-cells = <1>; + #size-cells = <0>; + + rt1711h_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&hikey_usb_ep1>; + }; + }; + }; +}; + +&i2c2 { + /* USB HUB is on this bus at address 0x44 */ + status = "okay"; +}; + +&dwc3 { /* USB */ + dr_mode = "otg"; + maximum-speed = "super-speed"; + phy_type = "utmi"; + snps,dis-del-phy-power-chg-quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,tx_de_emphasis_quirk; + snps,tx_de_emphasis = <1>; + snps,dis-split-quirk; + snps,gctl-reset-quirk; + usb-role-switch; + role-switch-default-mode = "host"; + port { + #address-cells = <1>; + #size-cells = <0>; + dwc3_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&hikey_usb_ep0>; + }; + + dwc3_ss: endpoint@1 { + reg = <1>; + remote-endpoint = <&usb_con_ss>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 636c8817df7e..782e1487666d 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/hi3670-clock.h> +#include <dt-bindings/usb/pd.h> / { compatible = "hisilicon,hi3670"; @@ -785,5 +786,60 @@ i2c4: i2c@fdf0d000 { pinctrl-0 = <&i2c4_pmx_func &i2c4_cfg_func>; status = "disabled"; }; + + usb3_otg_bc: usb3_otg_bc@ff200000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff200000 0x0 0x1000>; + + usb_phy: usbphy { + compatible = "hisilicon,hi3670-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,sctrl-syscon = <&sctrl>; + hisilicon,eye-diagram-param = <0xFDFEE4>; + hisilicon,tx-vboost-lvl = <0x5>; + }; + }; + + usb31_misc_rst: usb31_misc_rst_controller { + compatible = "hisilicon,hi3660-reset"; + #reset-cells = <2>; + hisi,rst-syscon = <&usb3_otg_bc>; + }; + + usb3: hisi_dwc3 { + compatible = "hisilicon,hi3670-dwc3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&crg_ctrl HI3670_CLK_GATE_ABB_USB>, + <&crg_ctrl HI3670_HCLK_GATE_USB3OTG>, + <&crg_ctrl HI3670_CLK_GATE_USB3OTG_REF>, + <&crg_ctrl HI3670_ACLK_GATE_USB3DVFS>; + clock-names = "clk_gate_abb_usb", + "hclk_gate_usb3otg", + "clk_gate_usb3otg_ref", + "aclk_gate_usb3dvfs"; + + assigned-clocks = <&crg_ctrl HI3670_ACLK_GATE_USB3DVFS>; + assigned-clock-rates = <238000000>; + resets = <&crg_rst 0x90 6>, + <&crg_rst 0x90 7>, + <&usb31_misc_rst 0xA0 8>, + <&usb31_misc_rst 0xA0 9>; + + dwc3: usb@ff100000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff100000 0x0 0x100000>; + + interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>, + <0 161 IRQ_TYPE_LEVEL_HIGH>; + + phys = <&usb_phy>; + phy-names = "usb3-phy"; + }; + }; }; }; -- 2.33.1
