Re: [PATCH v3 2/4] iio: proximity: Add sx9360 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 12 Dec 2021 18:40:55 -0800
Gwendal Grignou <gwendal@xxxxxxxxxxxx> wrote:

> A simplified version of SX9324, it only have one pin and
> 2 phases (aka channels).
> Only one event is presented.
> 
> Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>

You don't use the modifier defined in the previous
patch...

> ---
> Changes since v2:
> - Fix issues reported during sx9324 driver review:
>   - fix include with iwyu
>   - Remove call to ACPI_PTR to prevent unused variable warning.
> - Fix panic when setting frequency to 0.
> - Add offset to decipher interrupt register
> - Fix default register value.
> 
> Changes since v1:
> - Remove SX9360_DRIVER_NAME
> - Simplify whoami function
> - Define WHOAMI register value internally.
> - Handle negative values when setting sysfs parameters.
> 
>  drivers/iio/proximity/Kconfig  |  14 +
>  drivers/iio/proximity/Makefile |   1 +
>  drivers/iio/proximity/sx9360.c | 807 +++++++++++++++++++++++++++++++++
>  3 files changed, 822 insertions(+)
>  create mode 100644 drivers/iio/proximity/sx9360.c
> 
....


> +static const struct iio_chan_spec sx9360_channels[] = {
> +	{
> +		.type = IIO_PROXIMITY,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +				      BIT(IIO_CHAN_INFO_HARDWAREGAIN),
> +		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> +		.info_mask_separate_available =
> +			BIT(IIO_CHAN_INFO_HARDWAREGAIN),
> +		.info_mask_shared_by_all_available =
> +			BIT(IIO_CHAN_INFO_SAMP_FREQ),
> +		.extend_name = "reference",

You defined the modifier for this and then didn't use it?  
I've suggested in review of patch 1 you might want to use label though
via the read_label() callback.


> +		.address = SX9360_REG_USEFUL_PHR_MSB,
> +		.channel = 0,
> +		.scan_index = 0,
> +		.scan_type = {
> +			.sign = 's',
> +			.realbits = 12,
> +			.storagebits = 16,
> +			.endianness = IIO_BE,
> +		},
> +	},
> +	{
> +		.type = IIO_PROXIMITY,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +				      BIT(IIO_CHAN_INFO_HARDWAREGAIN),
> +		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> +		.info_mask_separate_available =
> +			BIT(IIO_CHAN_INFO_HARDWAREGAIN),
> +		.info_mask_shared_by_all_available =
> +			BIT(IIO_CHAN_INFO_SAMP_FREQ),
> +		.address = SX9360_REG_USEFUL_PHM_MSB,
> +		.event_spec = sx_common_events,
> +		.num_event_specs = ARRAY_SIZE(sx_common_events),
> +		.channel = 1,
> +		.scan_index = 1,
> +		.scan_type = {
> +			.sign = 's',
> +			.realbits = 12,
> +			.storagebits = 16,
> +			.endianness = IIO_BE,
> +		},
> +	},
> +	IIO_CHAN_SOFT_TIMESTAMP(2),
> +};
> +

...

> +
> +static int sx9360_read_samp_freq(struct sx_common_data *data,
> +				 int *val, int *val2)
> +{
> +	int ret, divisor;
> +	__be16 buf;
> +
> +	ret = regmap_bulk_read(data->regmap, SX9360_REG_GNRL_CTRL1,
> +			       &buf, sizeof(buf));
> +	if (ret < 0)
> +		return ret;
> +	divisor = be16_to_cpu(buf);
> +	if (divisor == 0) {
> +		*val = 0;
> +		return IIO_VAL_INT;
> +	}
> +
> +	*val = SX9360_FOSC_HZ;
> +	*val2 = be16_to_cpu(buf) * 8192;

*val2 = divisor * 8192;?

> +
> +	return IIO_VAL_FRACTIONAL;
> +}
> +

...

> +static int sx9360_write_raw(struct iio_dev *indio_dev,
> +			    const struct iio_chan_spec *chan, int val, int val2,
> +			    long mask)
> +{
> +	struct sx_common_data *data = iio_priv(indio_dev);
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_SAMP_FREQ:
> +		return sx9360_set_samp_freq(data, val, val2);
> +	case IIO_CHAN_INFO_HARDWAREGAIN:
> +		return sx9360_write_gain(data, chan, val);
> +	}
> +

Slight preference for this as a default in the switch.

> +	return -EINVAL;
> +}

...


> +static int sx9360_check_whoami(struct device *dev,
> + 				struct iio_dev *indio_dev)

Will fit on one line under 80 chars I think..

> +{
> +	/*
> +	 * Only one sensor for this driver. Assuming the device tree
> +	 * is correct, just set the sensor name.
> +	 */
> +	indio_dev->name = "sx9360";
> +	return 0;
> +}
> +

> +
> +static int __maybe_unused sx9360_suspend(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));

I don't feel particularly strongly about this, as there are arguments
either way but this is the same as

	struct iio_dev *indio_dev = dev_get_drvdata(dev);

> +	struct sx_common_data *data = iio_priv(indio_dev);
> +	unsigned int regval;
> +	int ret;
> +
> +	disable_irq_nosync(data->client->irq);
> +
> +	mutex_lock(&data->mutex);
> +	ret = regmap_read(data->regmap, SX9360_REG_GNRL_CTRL0, &regval);
> +
> +	data->suspend_ctrl =
> +		FIELD_GET(SX9360_REG_GNRL_CTRL0_PHEN_MASK, regval);
> +
> +	if (ret < 0)
> +		goto out;
> +
> +	/* Disable all phases, send the device to sleep. */
> +	ret = regmap_write(data->regmap, SX9360_REG_GNRL_CTRL0, 0);
> +
> +out:
> +	mutex_unlock(&data->mutex);
> +	return ret;
> +}
> +




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux