On Fri, 10 Dec 2021 11:23:23 -0800 Gwendal Grignou <gwendal@xxxxxxxxxxxx> wrote: > Add a new Semtech SAR sensor SX9324. > Instead of recopying 1/3 of the sx9310 driver, move common code in a new > file. It will be used again for the next sensor, SX9360. Series applied to the togreg branch of iio.git and pushed out as testing to let 0-day have a poke at it and see what it can find that we missed. Thanks, Jonathan > > Major changes in v7: > Fix one remaining syntax error in device tree binding documentation. > > Major changes in v6: > Fix syntax errors in device tree binding documentation. > Drop of_match_ptr and ACPI_PTR protections. > Fix unused variable warning. > > Major changes in v5: > Use iwyu to cleanup include files. > Use dev_err_probe() in probe routine > Add attribute to shift irq status register, not common among all > sensors. > Fix long line. > > Major changes in v4: > Use chip_info instead of info in common data. > Returns an error when setting negative sysfs entries > Fix cut and paste errors, credit. > > Major changes in v3: > Fix some error in binding descriptions and setting > Fix invalid register constant name. > > Major changes in v2: > Better interface between common code and drivers > Document SX9324 phase configuration > > Gwendal Grignou (5): > iio: sx9310: Add frequency in read_avail > iio: sx9310: Extract common Semtech sensor logic > iio: proximity: Add SX9324 support > dt-bindings: iio: Add sx9324 binding > iio: sx9324: Add dt_binding support > > .../ABI/testing/sysfs-bus-iio-sx9324 | 28 + > .../iio/proximity/semtech,sx9324.yaml | 161 +++ > drivers/iio/proximity/Kconfig | 18 + > drivers/iio/proximity/Makefile | 2 + > drivers/iio/proximity/sx9310.c | 714 ++--------- > drivers/iio/proximity/sx9324.c | 1076 +++++++++++++++++ > drivers/iio/proximity/sx_common.c | 576 +++++++++ > drivers/iio/proximity/sx_common.h | 163 +++ > 8 files changed, 2127 insertions(+), 611 deletions(-) > create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sx9324 > create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml > create mode 100644 drivers/iio/proximity/sx9324.c > create mode 100644 drivers/iio/proximity/sx_common.c > create mode 100644 drivers/iio/proximity/sx_common.h >
