[PATCH v3] arm64: dts: imx8mp-evk: configure multiple queues on eqos

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Eqos ethernet support five queues on hardware, enable these queues and
configure the priority of each queue. Uses Strict Priority as scheduling
algorithms to ensure that the TSN function works.

The priority of each queue is a bitmask value that maps VLAN tag
priority to the queue. Since the hardware only supports five queues,
this patch maps priority 0-4 to queues one by one, and priority 5-7 to
queue 4.

The total fifo size of 5 queues is 8192 bytes, if enable 5 queues with
store-and-forward mode, it's not enough for large packets, which would
trigger fifo overflow frequently. This patch set DMA to thresh mode to
enable all 5 queues.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@xxxxxxx>
Reviewed-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
---
v1->v2:
 - Use bitmask to set priority attributes.
 - Add default properties for each queue.
 - Add CC to the maintainers.
v2->v3:
 - Add newline between properties and child node.

 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 68 ++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 7b99fad6e4d6..6fd1376258db 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -86,6 +86,9 @@
 	pinctrl-0 = <&pinctrl_eqos>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
+	snps,force_thresh_dma_mode;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
 	status = "okay";
 
 	mdio {
@@ -99,6 +102,71 @@
 			eee-broken-1000t;
 		};
 	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
 };
 
 &fec {
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux