On Wed, Dec 15, 2021 at 12:10 AM Nikita Shubin
<nikita.shubin@xxxxxxxxxxx> wrote:
>
> Hello Atish!
>
> On Mon, 25 Oct 2021 12:53:44 -0700
> Atish Patra <atish.patra@xxxxxxx> wrote:
>
> > This patch adds all the definitions defined by the SBI PMU extension.
> >
> > Signed-off-by: Atish Patra <atish.patra@xxxxxxx>
> > ---
> > arch/riscv/include/asm/sbi.h | 97
> > ++++++++++++++++++++++++++++++++++++ 1 file changed, 97 insertions(+)
> >
> > diff --git a/arch/riscv/include/asm/sbi.h
> > b/arch/riscv/include/asm/sbi.h index 0d42693cb65e..7a14ca06ba8f 100644
> > --- a/arch/riscv/include/asm/sbi.h
> > +++ b/arch/riscv/include/asm/sbi.h
> > @@ -27,6 +27,7 @@ enum sbi_ext_id {
> > SBI_EXT_IPI = 0x735049,
> > SBI_EXT_RFENCE = 0x52464E43,
> > SBI_EXT_HSM = 0x48534D,
> > + SBI_EXT_PMU = 0x504D55,
> > };
> >
> > enum sbi_ext_base_fid {
> > @@ -70,6 +71,99 @@ enum sbi_hsm_hart_status {
> > SBI_HSM_HART_STATUS_STOP_PENDING,
> > };
> >
> > +
> > +enum sbi_ext_pmu_fid {
> > + SBI_EXT_PMU_NUM_COUNTERS = 0,
> > + SBI_EXT_PMU_COUNTER_GET_INFO,
> > + SBI_EXT_PMU_COUNTER_CFG_MATCH,
> > + SBI_EXT_PMU_COUNTER_START,
> > + SBI_EXT_PMU_COUNTER_STOP,
> > + SBI_EXT_PMU_COUNTER_FW_READ,
> > +};
> > +
> > +#define RISCV_PMU_RAW_EVENT_MASK GENMASK_ULL(55, 0)
> > +#define RISCV_PMU_RAW_EVENT_IDX 0x20000
> > +
> > +/** General pmu event codes specified in SBI PMU extension */
> > +enum sbi_pmu_hw_generic_events_t {
> > + SBI_PMU_HW_NO_EVENT = 0,
> > + SBI_PMU_HW_CPU_CYCLES = 1,
> > + SBI_PMU_HW_INSTRUCTIONS = 2,
> > + SBI_PMU_HW_CACHE_REFERENCES = 3,
> > + SBI_PMU_HW_CACHE_MISSES = 4,
> > + SBI_PMU_HW_BRANCH_INSTRUCTIONS = 5,
> > + SBI_PMU_HW_BRANCH_MISSES = 6,
> > + SBI_PMU_HW_BUS_CYCLES = 7,
> > + SBI_PMU_HW_STALLED_CYCLES_FRONTEND = 8,
> > + SBI_PMU_HW_STALLED_CYCLES_BACKEND = 9,
> > + SBI_PMU_HW_REF_CPU_CYCLES = 10,
> > +
> > + SBI_PMU_HW_GENERAL_MAX,
> > +};
> > +
> > +/**
> > + * Special "firmware" events provided by the firmware, even if the
> > hardware
> > + * does not support performance events. These events are encoded as
> > a raw
> > + * event type in Linux kernel perf framework.
> > + */
> > +enum sbi_pmu_fw_generic_events_t {
> > + SBI_PMU_FW_MISALIGNED_LOAD = 0,
> > + SBI_PMU_FW_MISALIGNED_STORE = 1,
> > + SBI_PMU_FW_ACCESS_LOAD = 2,
> > + SBI_PMU_FW_ACCESS_STORE = 3,
> > + SBI_PMU_FW_ILLEGAL_INSN = 4,
> > + SBI_PMU_FW_SET_TIMER = 5,
> > + SBI_PMU_FW_IPI_SENT = 6,
> > + SBI_PMU_FW_IPI_RECVD = 7,
> > + SBI_PMU_FW_FENCE_I_SENT = 8,
> > + SBI_PMU_FW_FENCE_I_RECVD = 9,
> > + SBI_PMU_FW_SFENCE_VMA_SENT = 10,
> > + SBI_PMU_FW_SFENCE_VMA_RCVD = 11,
> > + SBI_PMU_FW_SFENCE_VMA_ASID_SENT = 12,
> > + SBI_PMU_FW_SFENCE_VMA_ASID_RCVD = 13,
> > +
> > + SBI_PMU_FW_HFENCE_GVMA_SENT = 14,
> > + SBI_PMU_FW_HFENCE_GVMA_RCVD = 15,
> > + SBI_PMU_FW_HFENCE_GVMA_VMID_SENT = 16,
> > + SBI_PMU_FW_HFENCE_GVMA_VMID_RCVD = 17,
> > +
> > + SBI_PMU_FW_HFENCE_VVMA_SENT = 18,
> > + SBI_PMU_FW_HFENCE_VVMA_RCVD = 19,
> > + SBI_PMU_FW_HFENCE_VVMA_ASID_SENT = 20,
> > + SBI_PMU_FW_HFENCE_VVMA_ASID_RCVD = 21,
> > + SBI_PMU_FW_MAX,
> > +};
> > +
> > +/* SBI PMU event types */
> > +enum sbi_pmu_event_type {
> > + SBI_PMU_EVENT_TYPE_HW = 0x0,
> > + SBI_PMU_EVENT_TYPE_CACHE = 0x1,
> > + SBI_PMU_EVENT_TYPE_RAW = 0x2,
> > + SBI_PMU_EVENT_TYPE_FW = 0xf,
> > +};
> > +
> > +/* SBI PMU event types */
> > +enum sbi_pmu_ctr_type {
> > + SBI_PMU_CTR_TYPE_HW = 0x0,
> > + SBI_PMU_CTR_TYPE_FW,
> > +};
> > +
> > +/* Flags defined for config matching function */
> > +#define SBI_PMU_CFG_FLAG_SKIP_MATCH (1 << 0)
> > +#define SBI_PMU_CFG_FLAG_CLEAR_VALUE (1 << 1)
> > +#define SBI_PMU_CFG_FLAG_AUTO_START (1 << 2)
> > +#define SBI_PMU_CFG_FLAG_SET_MINH (1 << 3)
> > +#define SBI_PMU_CFG_FLAG_SET_SINH (1 << 4)
> > +#define SBI_PMU_CFG_FLAG_SET_UINH (1 << 5)
> > +#define SBI_PMU_CFG_FLAG_SET_VSINH (1 << 6)
> > +#define SBI_PMU_CFG_FLAG_SET_VUINH (1 << 7)
>
> It looks like you have a typo here, the defines in OpenSBI are
> different:
>
> #define SBI_PMU_CFG_FLAG_SET_VUINH (1 << 3)
> #define SBI_PMU_CFG_FLAG_SET_VSINH (1 << 4)
> #define SBI_PMU_CFG_FLAG_SET_UINH (1 << 5)
> #define SBI_PMU_CFG_FLAG_SET_SINH (1 << 6)
> #define SBI_PMU_CFG_FLAG_SET_MINH (1 << 7)
>
>
Thanks for catching that. OpenSBI has the correct one as per the
specification[1].
I will fix it in the next version.
[1] https://github.com/riscv-software-src/opensbi/blob/master/include/sbi/sbi_ecall_interface.h
> > +
> > +/* Flags defined for counter start function */
> > +#define SBI_PMU_START_FLAG_SET_INIT_VALUE (1 << 0)
> > +
> > +/* Flags defined for counter stop function */
> > +#define SBI_PMU_STOP_FLAG_RESET (1 << 0)
> > +
> > #define SBI_SPEC_VERSION_DEFAULT 0x1
> > #define SBI_SPEC_VERSION_MAJOR_SHIFT 24
> > #define SBI_SPEC_VERSION_MAJOR_MASK 0x7f
> > @@ -82,6 +176,9 @@ enum sbi_hsm_hart_status {
> > #define SBI_ERR_INVALID_PARAM -3
> > #define SBI_ERR_DENIED -4
> > #define SBI_ERR_INVALID_ADDRESS -5
> > +#define SBI_ERR_ALREADY_AVAILABLE -6
> > +#define SBI_ERR_ALREADY_STARTED -7
> > +#define SBI_ERR_ALREADY_STOPPED -8
> >
> > extern unsigned long sbi_spec_version;
> > struct sbiret {
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv
--
Regards,
Atish
