From: Chao Xie <chao.xie@xxxxxxxxxxx>
It adds the DT support for pxa168 clock subsystem.
Signed-off-by: Chao Xie <chao.xie@xxxxxxxxxxx>
---
.../bindings/clock/marvell-pxa168-clock.txt | 20 ++
drivers/clk/mmp/Makefile | 2 +
drivers/clk/mmp/clk-of-pxa168.c | 251 +++++++++++++++++++++
include/dt-bindings/clock/marvell-pxa168.h | 57 +++++
4 files changed, 330 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/marvell-pxa168-clock.txt
create mode 100644 drivers/clk/mmp/clk-of-pxa168.c
create mode 100644 include/dt-bindings/clock/marvell-pxa168.h
diff --git a/Documentation/devicetree/bindings/clock/marvell-pxa168-clock.txt b/Documentation/devicetree/bindings/clock/marvell-pxa168-clock.txt
new file mode 100644
index 0000000..888de87
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell-pxa168-clock.txt
@@ -0,0 +1,20 @@
+* Marvell PXA168 Clock Controller
+
+The PXA168 clock subsystem generates and supplies clock to various
+controllers within the PXA168 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "marvell,pxa168-clock" - controller compatible with PXA168 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+ region. There are 3 places in SOC has clock control logic:
+ "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell-pxa168.h>.
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 32b5b90..37c14fa 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -4,6 +4,8 @@
obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
+obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o
+
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
diff --git a/drivers/clk/mmp/clk-of-pxa168.c b/drivers/clk/mmp/clk-of-pxa168.c
new file mode 100644
index 0000000..deac716
--- /dev/null
+++ b/drivers/clk/mmp/clk-of-pxa168.c
@@ -0,0 +1,251 @@
+/*
+ * pxa168 clock framework source file
+ *
+ * Copyright (C) 2012 Marvell
+ * Chao Xie <xiechao.mail@xxxxxxxxx>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/marvell-pxa168.h>
+
+#include "clk.h"
+
+#define APBC_RTC 0x28
+#define APBC_TWSI0 0x2c
+#define APBC_KPC 0x30
+#define APBC_UART0 0x0
+#define APBC_UART1 0x4
+#define APBC_GPIO 0x8
+#define APBC_PWM0 0xc
+#define APBC_PWM1 0x10
+#define APBC_PWM2 0x14
+#define APBC_PWM3 0x18
+#define APBC_SSP0 0x81c
+#define APBC_SSP1 0x820
+#define APBC_SSP2 0x84c
+#define APBC_SSP3 0x858
+#define APBC_SSP4 0x85c
+#define APBC_TWSI1 0x6c
+#define APBC_UART2 0x70
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_USB 0x5c
+#define APMU_DISP0 0x4c
+#define APMU_CCIC0 0x50
+#define APMU_DFC 0x60
+#define MPMU_UART_PLL 0x14
+
+struct pxa168_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+ {PXA168_CLK_CLK32, "clk32", NULL, CLK_IS_ROOT, 32768},
+ {PXA168_CLK_VCTCXO, "vctcxo", NULL, CLK_IS_ROOT, 26000000},
+ {PXA168_CLK_PLL1, "pll1", NULL, CLK_IS_ROOT, 624000000},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+ {PXA168_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0},
+ {PXA168_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0},
+ {PXA168_CLK_PLL1_8, "pll1_8", "pll1_4", 1, 2, 0},
+ {PXA168_CLK_PLL1_16, "pll1_16", "pll1_8", 1, 2, 0},
+ {PXA168_CLK_PLL1_6, "pll1_6", "pll1_2", 1, 3, 0},
+ {PXA168_CLK_PLL1_12, "pll1_12", "pll1_6", 1, 2, 0},
+ {PXA168_CLK_PLL1_24, "pll1_24", "pll1_12", 1, 2, 0},
+ {PXA168_CLK_PLL1_48, "pll1_48", "pll1_24", 1, 2, 0},
+ {PXA168_CLK_PLL1_96, "pll1_96", "pll1_48", 1, 2, 0},
+ {PXA168_CLK_PLL1_13, "pll1_13", "pll1", 1, 13, 0},
+ {PXA168_CLK_PLL1_13_1_5, "pll1_13_1_5", "pll1_13", 2, 3, 0},
+ {PXA168_CLK_PLL1_2_1_5, "pll1_2_1_5", "pll1_2", 2, 3, 0},
+ {PXA168_CLK_PLL1_3_16, "pll1_3_16", "pll1", 3, 16, 0},
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = 0x1fff,
+ .den_mask = 0x1fff,
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
+ {.num = 8125, .den = 1536}, /*14.745MHZ */
+};
+
+static void pxa168_pll_init(struct pxa168_clk_unit *pxa_unit)
+{
+ struct clk *clk;
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+ ARRAY_SIZE(fixed_rate_clks));
+
+ mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ clk = mmp_clk_register_factor("uart_pll", "pll1_4",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl), NULL);
+ mmp_clk_add(unit, PXA168_CLK_UART_PLL, clk);
+}
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+static DEFINE_SPINLOCK(uart2_lock);
+static const char *uart_parent_names[] = {"pll1_3_16", "uart_pll"};
+
+static DEFINE_SPINLOCK(ssp0_lock);
+static DEFINE_SPINLOCK(ssp1_lock);
+static DEFINE_SPINLOCK(ssp2_lock);
+static DEFINE_SPINLOCK(ssp3_lock);
+static DEFINE_SPINLOCK(ssp4_lock);
+static const char *ssp_parent_names[] = {"pll1_96", "pll1_48", "pll1_24", "pll1_12"};
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+ {0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
+ {0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
+ {0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART2, 4, 3, 0, &uart2_lock},
+ {0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP0, 4, 3, 0, &ssp0_lock},
+ {0, "ssp1_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP1, 4, 3, 0, &ssp1_lock},
+ {0, "ssp2_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP2, 4, 3, 0, &ssp2_lock},
+ {0, "ssp3_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP3, 4, 3, 0, &ssp3_lock},
+ {0, "ssp4_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), CLK_SET_RATE_PARENT, APBC_SSP4, 4, 3, 0, &ssp4_lock},
+};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+ {PXA168_CLK_TWSI0, "twsi0_clk", "pll1_13_1_5", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x7, 0x3, 0x0, 0, NULL},
+ {PXA168_CLK_TWSI1, "twsi1_clk", "pll1_13_1_5", CLK_SET_RATE_PARENT, APBC_TWSI1, 0x7, 0x3, 0x0, 0, NULL},
+ {PXA168_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x7, 0x3, 0x0, 0, NULL},
+ {PXA168_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA168_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x87, 0x83, 0x0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA168_CLK_PWM0, "pwm0_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM0, 0x7, 0x3, 0x0, 0, NULL},
+ {PXA168_CLK_PWM1, "pwm1_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM1, 0x7, 0x3, 0x0, 0, NULL},
+ {PXA168_CLK_PWM2, "pwm2_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM2, 0x7, 0x3, 0x0, 0, NULL},
+ {PXA168_CLK_PWM3, "pwm3_clk", "pll1_48", CLK_SET_RATE_PARENT, APBC_PWM3, 0x7, 0x3, 0x0, 0, NULL},
+ /* The gate clocks has mux parent. */
+ {PXA168_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x7, 0x3, 0x0, 0, &uart0_lock},
+ {PXA168_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x7, 0x3, 0x0, 0, &uart1_lock},
+ {PXA168_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBC_UART2, 0x7, 0x3, 0x0, 0, &uart2_lock},
+ {PXA168_CLK_SSP0, "ssp0_clk", "ssp0_mux", CLK_SET_RATE_PARENT, APBC_SSP0, 0x7, 0x3, 0x0, 0, &ssp0_lock},
+ {PXA168_CLK_SSP1, "ssp1_clk", "ssp1_mux", CLK_SET_RATE_PARENT, APBC_SSP1, 0x7, 0x3, 0x0, 0, &ssp1_lock},
+ {PXA168_CLK_SSP2, "ssp2_clk", "ssp2_mux", CLK_SET_RATE_PARENT, APBC_SSP2, 0x7, 0x3, 0x0, 0, &ssp2_lock},
+ {PXA168_CLK_SSP3, "ssp3_clk", "ssp3_mux", CLK_SET_RATE_PARENT, APBC_SSP3, 0x7, 0x3, 0x0, 0, &ssp3_lock},
+ {PXA168_CLK_SSP4, "ssp4_clk", "ssp4_mux", CLK_SET_RATE_PARENT, APBC_SSP4, 0x7, 0x3, 0x0, 0, &ssp4_lock},
+};
+
+static void pxa168_apb_periph_clk_init(struct pxa168_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_mux_clks));
+
+ mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_gate_clks));
+}
+
+static DEFINE_SPINLOCK(sdh0_lock);
+static DEFINE_SPINLOCK(sdh1_lock);
+static const char *sdh_parent_names[] = {"pll1_12", "pll1_13"};
+
+static DEFINE_SPINLOCK(usb_lock);
+
+static DEFINE_SPINLOCK(disp0_lock);
+static const char *disp_parent_names[] = {"pll1_2", "pll1_12"};
+
+static DEFINE_SPINLOCK(ccic0_lock);
+static const char *ccic_parent_names[] = {"pll1_2", "pll1_12"};
+static const char *ccic_phy_parent_names[] = {"pll1_6", "pll1_12"};
+
+static struct mmp_param_mux_clk apmu_mux_clks[] = {
+ {0, "sdh0_mux", sdh_parent_names, ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT, APMU_SDH0, 6, 1, 0, &sdh0_lock},
+ {0, "sdh1_mux", sdh_parent_names, ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT, APMU_SDH1, 6, 1, 0, &sdh1_lock},
+ {0, "disp0_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP0, 6, 1, 0, &disp0_lock},
+ {0, "ccic0_mux", ccic_parent_names, ARRAY_SIZE(ccic_parent_names), CLK_SET_RATE_PARENT, APMU_CCIC0, 6, 1, 0, &ccic0_lock},
+ {0, "ccic0_phy_mux", ccic_phy_parent_names, ARRAY_SIZE(ccic_phy_parent_names), CLK_SET_RATE_PARENT, APMU_CCIC0, 7, 1, 0, &ccic0_lock},
+};
+
+static struct mmp_param_div_clk apmu_div_clks[] = {
+ {0, "ccic0_sphy_div", "ccic0_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 10, 5, 0, &ccic0_lock},
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+ {PXA168_CLK_DFC, "dfc_clk", "pll1_4", CLK_SET_RATE_PARENT, APMU_DFC, 0x19b, 0x19b, 0x0, 0, NULL},
+ {PXA168_CLK_USB, "usb_clk", "usb_pll", 0, APMU_USB, 0x9, 0x9, 0x0, 0, &usb_lock},
+ {PXA168_CLK_SPH, "sph_clk", "usb_pll", 0, APMU_USB, 0x12, 0x12, 0x0, 0, &usb_lock},
+ /* The gate clocks has mux parent. */
+ {PXA168_CLK_SDH0, "sdh0_clk", "sdh0_mux", CLK_SET_RATE_PARENT, APMU_SDH0, 0x1b, 0x1b, 0x0, 0, &sdh0_lock},
+ {PXA168_CLK_SDH1, "sdh1_clk", "sdh1_mux", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh1_lock},
+ {PXA168_CLK_DISP0, "disp0_clk", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1b, 0x1b, 0x0, 0, &disp0_lock},
+ {PXA168_CLK_CCIC0, "ccic0_clk", "ccic0_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1b, 0x1b, 0x0, 0, &ccic0_lock},
+ {PXA168_CLK_CCIC0_PHY, "ccic0_phy_clk", "ccic0_phy_mux", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x24, 0x24, 0x0, 0, &ccic0_lock},
+ {PXA168_CLK_CCIC0_SPHY, "ccic0_sphy_clk", "ccic0_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x300, 0x300, 0x0, 0, &ccic0_lock},
+};
+
+static void pxa168_axi_periph_clk_init(struct pxa168_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apmu_mux_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_mux_clks));
+
+ mmp_register_div_clks(unit, apmu_div_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_div_clks));
+
+ mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_gate_clks));
+}
+
+static void __init pxa168_clk_init(struct device_node *np)
+{
+ struct pxa168_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->mpmu_base = of_iomap(np, 0);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map mpmu registers\n");
+ return;
+ }
+
+ pxa_unit->apmu_base = of_iomap(np, 1);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map apmu registers\n");
+ return;
+ }
+
+ pxa_unit->apbc_base = of_iomap(np, 2);
+ if (!pxa_unit->apbc_base) {
+ pr_err("failed to map apbc registers\n");
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, PXA168_NR_CLKS);
+
+ pxa168_pll_init(pxa_unit);
+
+ pxa168_apb_periph_clk_init(pxa_unit);
+
+ pxa168_axi_periph_clk_init(pxa_unit);
+}
+
+CLK_OF_DECLARE(pxa168_clk, "marvell,pxa168-clock", pxa168_clk_init);
diff --git a/include/dt-bindings/clock/marvell-pxa168.h b/include/dt-bindings/clock/marvell-pxa168.h
new file mode 100644
index 0000000..79630b9
--- /dev/null
+++ b/include/dt-bindings/clock/marvell-pxa168.h
@@ -0,0 +1,57 @@
+#ifndef __DTS_MARVELL_PXA168_CLOCK_H
+#define __DTS_MARVELL_PXA168_CLOCK_H
+
+/* fixed clocks and plls */
+#define PXA168_CLK_CLK32 1
+#define PXA168_CLK_VCTCXO 2
+#define PXA168_CLK_PLL1 3
+#define PXA168_CLK_PLL1_2 8
+#define PXA168_CLK_PLL1_4 9
+#define PXA168_CLK_PLL1_8 10
+#define PXA168_CLK_PLL1_16 11
+#define PXA168_CLK_PLL1_6 12
+#define PXA168_CLK_PLL1_12 13
+#define PXA168_CLK_PLL1_24 14
+#define PXA168_CLK_PLL1_48 15
+#define PXA168_CLK_PLL1_96 16
+#define PXA168_CLK_PLL1_13 17
+#define PXA168_CLK_PLL1_13_1_5 18
+#define PXA168_CLK_PLL1_2_1_5 19
+#define PXA168_CLK_PLL1_3_16 20
+#define PXA168_CLK_UART_PLL 27
+
+/* apb periphrals */
+#define PXA168_CLK_TWSI0 60
+#define PXA168_CLK_TWSI1 61
+#define PXA168_CLK_TWSI2 62
+#define PXA168_CLK_TWSI3 63
+#define PXA168_CLK_GPIO 64
+#define PXA168_CLK_KPC 65
+#define PXA168_CLK_RTC 66
+#define PXA168_CLK_PWM0 67
+#define PXA168_CLK_PWM1 68
+#define PXA168_CLK_PWM2 69
+#define PXA168_CLK_PWM3 70
+#define PXA168_CLK_UART0 71
+#define PXA168_CLK_UART1 72
+#define PXA168_CLK_UART2 73
+#define PXA168_CLK_SSP0 74
+#define PXA168_CLK_SSP1 75
+#define PXA168_CLK_SSP2 76
+#define PXA168_CLK_SSP3 77
+#define PXA168_CLK_SSP4 78
+
+/* axi periphrals */
+#define PXA168_CLK_DFC 100
+#define PXA168_CLK_SDH0 101
+#define PXA168_CLK_SDH1 102
+#define PXA168_CLK_SDH2 103
+#define PXA168_CLK_USB 104
+#define PXA168_CLK_SPH 105
+#define PXA168_CLK_DISP0 106
+#define PXA168_CLK_CCIC0 107
+#define PXA168_CLK_CCIC0_PHY 108
+#define PXA168_CLK_CCIC0_SPHY 109
+
+#define PXA168_NR_CLKS 200
+#endif
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
