On Wed, Dec 15, 2021 at 11:58:03AM +0800, Leizhen (ThunderTown) wrote:
>
>
> On 2021/12/15 10:13, Pingfan Liu wrote:
> > On arm64, during kdump kernel saves vmcore, it runs into the following bug:
> > ...
> > [ 15.148919] usercopy: Kernel memory exposure attempt detected from SLUB object 'kmem_cache_node' (offset 0, size 4096)!
> > [ 15.159707] ------------[ cut here ]------------
> > [ 15.164311] kernel BUG at mm/usercopy.c:99!
> > [ 15.168482] Internal error: Oops - BUG: 0 [#1] SMP
> > [ 15.173261] Modules linked in: xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce sbsa_gwdt ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm_ttm_helper ttm drm nvme nvme_core xgene_hwmon i2c_designware_platform i2c_designware_core dm_mirror dm_region_hash dm_log dm_mod overlay squashfs zstd_decompress loop
> > [ 15.206186] CPU: 0 PID: 542 Comm: cp Not tainted 5.16.0-rc4 #1
> > [ 15.212006] Hardware name: GIGABYTE R272-P30-JG/MP32-AR0-JG, BIOS F12 (SCP: 1.5.20210426) 05/13/2021
> > [ 15.221125] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> > [ 15.228073] pc : usercopy_abort+0x9c/0xa0
> > [ 15.232074] lr : usercopy_abort+0x9c/0xa0
> > [ 15.236070] sp : ffff8000121abba0
> > [ 15.239371] x29: ffff8000121abbb0 x28: 0000000000003000 x27: 0000000000000000
> > [ 15.246494] x26: 0000000080000400 x25: 0000ffff885c7000 x24: 0000000000000000
> > [ 15.253617] x23: 000007ff80400000 x22: ffff07ff80401000 x21: 0000000000000001
> > [ 15.260739] x20: 0000000000001000 x19: ffff07ff80400000 x18: ffffffffffffffff
> > [ 15.267861] x17: 656a626f2042554c x16: 53206d6f72662064 x15: 6574636574656420
> > [ 15.274983] x14: 74706d6574746120 x13: 2129363930342065 x12: 7a6973202c302074
> > [ 15.282105] x11: ffffc8b041d1b148 x10: 00000000ffff8000 x9 : ffffc8b04012812c
> > [ 15.289228] x8 : 00000000ffff7fff x7 : ffffc8b041d1b148 x6 : 0000000000000000
> > [ 15.296349] x5 : 0000000000000000 x4 : 0000000000007fff x3 : 0000000000000000
> > [ 15.303471] x2 : 0000000000000000 x1 : ffff07ff8c064800 x0 : 000000000000006b
> > [ 15.310593] Call trace:
> > [ 15.313027] usercopy_abort+0x9c/0xa0
> > [ 15.316677] __check_heap_object+0xd4/0xf0
> > [ 15.320762] __check_object_size.part.0+0x160/0x1e0
> > [ 15.325628] __check_object_size+0x2c/0x40
> > [ 15.329711] copy_oldmem_page+0x7c/0x140
> > [ 15.333623] read_from_oldmem.part.0+0xfc/0x1c0
> > [ 15.338142] __read_vmcore.constprop.0+0x23c/0x350
> > [ 15.342920] read_vmcore+0x28/0x34
> > [ 15.346309] proc_reg_read+0xb4/0xf0
> > [ 15.349871] vfs_read+0xb8/0x1f0
> > [ 15.353088] ksys_read+0x74/0x100
> > [ 15.356390] __arm64_sys_read+0x28/0x34
> > ...
> >
> > This bug introduced by commit b261dba2fdb2 ("arm64: kdump: Remove custom
> > linux,usable-memory-range handling"), which moves
> > memblock_cap_memory_range() to fdt, but it breaches the rules that
> > memblock_cap_memory_range() should come after memblock_add() etc as said
> > in commit e888fa7bb882 ("memblock: Check memory add/cap ordering").
>
> void __init early_init_dt_scan_nodes(void)
> {
> //(1) -->early_init_dt_check_for_usable_mem_range, fill cap_mem_addr
> rc = of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
>
> //(2) --> early_init_dt_add_memory_arch --> memblock_add()
> of_scan_flat_dt(early_init_dt_scan_memory, NULL);
>
> //(3)
> memblock_cap_memory_range(cap_mem_addr, cap_mem_size);
> }
>
> I didn't get it. The above step (1),(2),(3) comply with
> commit e888fa7bb882 ("memblock: Check memory add/cap ordering")
>
Well, at this scope, it does. But from a larger scope, let's say on
arm64,
setup_arch
...
setup_machine_fdt(); //which holds your case
...
efi_init(); //which call memblock_add, and breach the ordering.
> Did you see the warning?
> pr_warn("%s: No memory registered yet\n", __func__);
>
Yes, I did see this message, which brings me to commit e888fa7bb882
("memblock: Check memory add/cap ordering")
I am also curious why this bug does not be discovered. Is CONFIG_EFI
on at your case?
Thanks,
Pingfan
> >
> > As a consequence, the virtual address set up by copy_oldmem_page() does
> > not bail out from the test of virt_addr_valid() in check_heap_object(),
> > and finally hits the BUG_ON().
> >
> > Since memblock allocator has no idea about when the memblock is fully
> > populated, while efi_init() is aware, so tackling this issue by calling the
> > interface early_init_dt_check_for_usable_mem_range() exposed by of/fdt.
> >
> > Fixes: b261dba2fdb2 ("arm64: kdump: Remove custom linux,usable-memory-range handling")
> > Signed-off-by: Pingfan Liu <kernelfans@xxxxxxxxx>
> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > Cc: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
> > Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
> > Cc: Will Deacon <will@xxxxxxxxxx>
> > Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> > Cc: Mike Rapoport <rppt@xxxxxxxxxx>
> > Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > Cc: Frank Rowand <frowand.list@xxxxxxxxx>
> > Cc: Ard Biesheuvel <ardb@xxxxxxxxxx>
> > Cc: Nick Terrell <terrelln@xxxxxx>
> > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > To: devicetree@xxxxxxxxxxxxxxx
> > To: linux-efi@xxxxxxxxxxxxxxx
> > ---
> > v2 -> v3:
> > use static inline stub to avoid #ifdef according to Rob's suggestion
> >
> > drivers/firmware/efi/efi-init.c | 5 +++++
> > drivers/of/fdt.c | 2 +-
> > include/linux/of_fdt.h | 2 ++
> > 3 files changed, 8 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/firmware/efi/efi-init.c b/drivers/firmware/efi/efi-init.c
> > index b19ce1a83f91..b2c829e95bd1 100644
> > --- a/drivers/firmware/efi/efi-init.c
> > +++ b/drivers/firmware/efi/efi-init.c
> > @@ -235,6 +235,11 @@ void __init efi_init(void)
> > }
> >
> > reserve_regions();
> > + /*
> > + * For memblock manipulation, the cap should come after the memblock_add().
> > + * And now, memblock is fully populated, it is time to do capping.
> > + */
> > + early_init_dt_check_for_usable_mem_range();
> > efi_esrt_init();
> > efi_mokvar_table_init();
> >
> > diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
> > index 18a2df431bfd..aa07ef5cab5f 100644
> > --- a/drivers/of/fdt.c
> > +++ b/drivers/of/fdt.c
> > @@ -972,7 +972,7 @@ static unsigned long chosen_node_offset = -FDT_ERR_NOTFOUND;
> > * location from flat tree
> > * @node: reference to node containing usable memory range location ('chosen')
> > */
> > -static void __init early_init_dt_check_for_usable_mem_range(void)
> > +void __init early_init_dt_check_for_usable_mem_range(void)
> > {
> > const __be32 *prop;
> > int len;
> > diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
> > index cf48983d3c86..ad09beb6d13c 100644
> > --- a/include/linux/of_fdt.h
> > +++ b/include/linux/of_fdt.h
> > @@ -62,6 +62,7 @@ extern int early_init_dt_scan_chosen(unsigned long node, const char *uname,
> > int depth, void *data);
> > extern int early_init_dt_scan_memory(unsigned long node, const char *uname,
> > int depth, void *data);
> > +extern void early_init_dt_check_for_usable_mem_range(void);
> > extern int early_init_dt_scan_chosen_stdout(void);
> > extern void early_init_fdt_scan_reserved_mem(void);
> > extern void early_init_fdt_reserve_self(void);
> > @@ -86,6 +87,7 @@ extern void unflatten_and_copy_device_tree(void);
> > extern void early_init_devtree(void *);
> > extern void early_get_first_memblock_info(void *, phys_addr_t *);
> > #else /* CONFIG_OF_EARLY_FLATTREE */
> > +static inline void early_init_dt_check_for_usable_mem_range(void) {}
> > static inline int early_init_dt_scan_chosen_stdout(void) { return -ENODEV; }
> > static inline void early_init_fdt_scan_reserved_mem(void) {}
> > static inline void early_init_fdt_reserve_self(void) {}
> >
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
