On Tue, Dec 07, 2021 at 10:34:03AM +0100, Miquel Raynal wrote:
> Harmonize the different properties in this file by:
> * dropping the non-necessary allOf's
> * always defining the keywords in the following order:
> - first: "type"/"$ref",
> - second: "description" (when relevant),
If we're going to muck with this, really I prefer description first or
last and everything else together.
> - then the other generic keywords ("enum", "default", etc).
>
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/mtd/nand-controller.yaml | 16 +++++++---------
> 1 file changed, 7 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> index 5cd144a9ec99..7024ca24c2e2 100644
> --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> @@ -58,8 +58,7 @@ patternProperties:
> Contains the chip-select IDs.
>
> nand-ecc-engine:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/phandle
> + $ref: /schemas/types.yaml#/definitions/phandle
> description: |
> A phandle on the hardware ECC engine if any. There are
> basically three possibilities:
> @@ -79,25 +78,24 @@ patternProperties:
> description: Do not use any ECC correction.
>
> nand-ecc-placement:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/string
> - - enum: [ oob, interleaved ]
> + $ref: /schemas/types.yaml#/definitions/string
> description:
> Location of the ECC bytes. This location is unknown by default
> but can be explicitly set to "oob", if all ECC bytes are
> known to be stored in the OOB area, or "interleaved" if ECC
> bytes will be interleaved with regular data in the main area.
> + enum: [ oob, interleaved ]
>
> nand-ecc-algo:
> + $ref: /schemas/types.yaml#/definitions/string
> description:
> Desired ECC algorithm.
> - $ref: /schemas/types.yaml#/definitions/string
> enum: [hamming, bch, rs]
>
> nand-bus-width:
> + $ref: /schemas/types.yaml#/definitions/uint32
> description:
> Bus width to the NAND chip
> - $ref: /schemas/types.yaml#/definitions/uint32
> enum: [8, 16]
> default: 8
>
> @@ -113,15 +111,15 @@ patternProperties:
> build a volatile BBT in RAM.
>
> nand-ecc-strength:
> + $ref: /schemas/types.yaml#/definitions/uint32
> description:
> Maximum number of bits that can be corrected per ECC step.
> - $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 1
>
> nand-ecc-step-size:
> + $ref: /schemas/types.yaml#/definitions/uint32
> description:
> Number of data bytes covered by a single ECC step.
> - $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 1
>
> nand-ecc-maximize:
> --
> 2.27.0
>
>
