Chris,
On Mon, Aug 25, 2014 at 6:39 AM, Chris Zhong <zyw@xxxxxxxxxxxxxx> wrote:
> Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
>
> ---
>
> Changes in v5:
> Advices by Mark Brown
> - add description about regulator valid name.
> - add a header file "rockchip,rk808".
>
> Changes in v4:
> Advices by Doug
> - add a "#clock-cells" propertiy
> - update the example
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/clk/Kconfig | 9 +++
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-rk808.c | 164 +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 174 insertions(+)
> create mode 100644 drivers/clk/clk-rk808.c
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index cfd3af7..84e0590 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -38,6 +38,15 @@ config COMMON_CLK_MAX77686
> ---help---
> This driver supports Maxim 77686 crystal oscillator clock.
>
> +config COMMON_CLK_RK808
> + tristate "Clock driver for RK808"
> + depends on MFD_RK808
> + ---help---
> + This driver supports RK808 crystal oscillator clock. These
> + multi-function devices have two fixed-rate oscillators,
> + clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
> + by control register.
> +
> config COMMON_CLK_SI5351
> tristate "Clock driver for SiLabs 5351A/B/C"
> depends on I2C
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index f537a0b..99f53d5 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
> obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
> obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o
> obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o
> +obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o
> obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o
> obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
> obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o
> diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c
> new file mode 100644
> index 0000000..a8f8d81
> --- /dev/null
> +++ b/drivers/clk/clk-rk808.c
> @@ -0,0 +1,164 @@
> +/*
> + * Clkout driver for Rockchip RK808
> + *
> + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * Author: Chris Zhong <zyw@xxxxxxxxxxxxxx>
> + * Author: Zhang Qing <zhangqing@xxxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/rk808.h>
> +#include <linux/i2c.h>
> +
> +struct rk808_clkout {
> + struct rk808 *rk808;
> + struct clk_onecell_data clk_data;
> + struct clk_hw clkout1_hw;
> + struct clk_hw clkout2_hw;
> +};
> +
> +static unsigned long rk808_clkout_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + return 32768;
> +}
> +
> +static int rk808_clkout1_is_prepared(struct clk_hw *hw)
> +{
> + return 1;
> +}
> +
> +static int rk808_clkout2_control(struct clk_hw *hw, bool enable)
> +{
> + struct rk808_clkout *rk808_clkout = container_of(hw,
> + struct rk808_clkout,
> + clkout2_hw);
> + struct rk808 *rk808 = rk808_clkout->rk808;
> +
> + return regmap_update_bits(rk808->regmap, RK808_CLK32OUT_REG,
> + CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0);
> +}
> +
> +static int rk808_clkout2_prepare(struct clk_hw *hw)
> +{
> + return rk808_clkout2_control(hw, 1);
> +}
> +
> +static void rk808_clkout2_unprepare(struct clk_hw *hw)
> +{
> + rk808_clkout2_control(hw, 0);
> +}
> +
> +static int rk808_clkout2_is_prepared(struct clk_hw *hw)
> +{
> + struct rk808_clkout *rk808_clkout = container_of(hw,
> + struct rk808_clkout,
> + clkout2_hw);
> + struct rk808 *rk808 = rk808_clkout->rk808;
> + uint32_t val;
> +
> + int ret = regmap_read(rk808->regmap, RK808_CLK32OUT_REG, &val);
> +
> + if (ret < 0)
> + return ret;
> +
> + return (val & CLK32KOUT2_EN) ? 1 : 0;
> +}
> +
> +static const struct clk_ops rk808_clkout1_ops = {
> + .is_prepared = rk808_clkout1_is_prepared,
> + .recalc_rate = rk808_clkout_recalc_rate,
> +};
> +
> +static const struct clk_ops rk808_clkout2_ops = {
> + .prepare = rk808_clkout2_prepare,
> + .unprepare = rk808_clkout2_unprepare,
> + .is_prepared = rk808_clkout2_is_prepared,
> + .recalc_rate = rk808_clkout_recalc_rate,
> +};
> +
> +static int rk808_clkout_probe(struct platform_device *pdev)
> +{
> + struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
> + struct i2c_client *client = rk808->i2c;
> + struct device_node *node = client->dev.of_node;
> + struct clk_init_data init = {};
> + struct clk **clk_table;
> + struct rk808_clkout *rk808_clkout;
> +
> + rk808_clkout = devm_kzalloc(&client->dev,
> + sizeof(*rk808_clkout), GFP_KERNEL);
> + if (!rk808_clkout)
> + return -ENOMEM;
> +
> + rk808_clkout->rk808 = rk808;
> +
> + clk_table = devm_kzalloc(&client->dev,
> + 2*sizeof(struct clk *), GFP_KERNEL);
> + if (!clk_table)
> + return -ENOMEM;
> +
> + init.flags = CLK_IS_ROOT;
> + init.parent_names = NULL;
> + init.num_parents = 0;
> + init.name = "rk808-clkout1";
> + init.ops = &rk808_clkout1_ops;
> + rk808_clkout->clkout1_hw.init = &init;
> +
> + /* optional override of the clockname */
> + of_property_read_string_index(node, "clock-output-names",
> + 0, &init.name);
> +
> + clk_table[0] = devm_clk_register(&client->dev,
> + &rk808_clkout->clkout1_hw);
> + if (IS_ERR(clk_table[0]))
> + return PTR_ERR(clk_table[0]);
> +
> + init.name = "rk808-clkout2";
> + init.ops = &rk808_clkout2_ops;
> + rk808_clkout->clkout2_hw.init = &init;
> +
> + /* optional override of the clockname */
> + of_property_read_string_index(node, "clock-output-names",
> + 1, &init.name);
> +
> + clk_table[1] = devm_clk_register(&client->dev,
> + &rk808_clkout->clkout2_hw);
> + if (IS_ERR(clk_table[1]))
> + return PTR_ERR(clk_table[1]);
> +
> + rk808_clkout->clk_data.clks = clk_table;
> + rk808_clkout->clk_data.clk_num = 2;
> +
> + return of_clk_add_provider(node, of_clk_src_onecell_get, clk_table);
I'm about 99.9% certain that the above line should be:
return of_clk_add_provider(node, of_clk_src_onecell_get,
&rk808_clkout->clk_data);
The data for of_clk_src_onecell_get() should be of type "struct
clk_onecell_data *".
Otherwise this looks good to me and you can add my Reviewed-by tag
(and even my Tested-by tag).
-Doug
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
