Add dt-bindings header files and documentation for Sunplus SP7021 SoC.
Signed-off-by: Wells Lu <wellslutw@xxxxxxxxx>
---
Changes in V4
- Addressed comments of Mr. Linus Walleij.
- Remove 'if type object then' stuff for patternProperties '-pins$'.
- Added more descriptions about pins control of SP7021.
- Modified name property 'pins' to 'sunplus,pins' (vendor specific).
- Modified name property 'zero_func' to 'sunplus,zero_func' (vendor specific).
.../bindings/pinctrl/sunplus,sp7021-pinctrl.yaml | 375 +++++++++++++++++++++
MAINTAINERS | 9 +
include/dt-bindings/pinctrl/sppctl-sp7021.h | 173 ++++++++++
include/dt-bindings/pinctrl/sppctl.h | 40 +++
4 files changed, 597 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
create mode 100644 include/dt-bindings/pinctrl/sppctl-sp7021.h
create mode 100644 include/dt-bindings/pinctrl/sppctl.h
diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
new file mode 100644
index 0000000..6ecd999
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
@@ -0,0 +1,375 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/sunplus,sp7021-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Pin Controller Device Tree Bindings
+
+maintainers:
+ - Dvorkin Dmitry <dvorkin@xxxxxxxxx>
+ - Wells Lu <wellslutw@xxxxxxxxx>
+
+description: |
+ The Sunplus SP7021 pin controller is used to control SoC pins. Please
+ refer to pinctrl-bindings.txt in this directory for details of the common
+ pinctrl bindings used by client devices.
+
+ SP7021 has 99 digital GPIO pins which are numbered from GPIO 0 to 98. All
+ are multiplexed with some special function pins. SP7021 has 3 types of
+ special function pins:
+
+ (1) function-group pins:
+ Ex 1 (SPI-NOR flash):
+ If control-field SPI_FLASH_SEL is set to 1, GPIO 83, 84, 86 and 87
+ will be pins of SPI-NOR flash. If it is set to 2, GPIO 76, 78, 79
+ and 81 will be pins of SPI-NOR flash.
+
+ Ex 2 (UART_0):
+ If control-bit UA0_SEL is set to 1, GPIO 88 and 89 will be TX and
+ RX pins of UART_0 (UART channel 0).
+
+ Ex 3 (eMMC):
+ If control-bit EMMC_SEL is set to 1, GPIO 72, 73, 74, 75, 76, 77,
+ 78, 79, 80, 81 will be pins of an eMMC device.
+
+ Properties "function" and "groups" are used to select function-group
+ pins.
+
+ (2) fully pin-mux (like phone exchange mux) pins:
+ GPIO 8 to 71 are 'fully pin-mux' pins. Any pins of peripherals of
+ SP7021 (ex: UART_1, UART_2, UART_3, UART_4, I2C_0, I2C_1, and etc.)
+ can be routed to any pins of fully pin-mux pins.
+
+ Ex 1 (UART channel 1):
+ If control-field UA1_TX_SEL is set to 3, TX pin of UART_1 will be
+ routed to GPIO 10 (3 - 1 + 8 = 10).
+ If control-field UA1_RX_SEL is set to 4, RX pin of UART_1 will be
+ routed to GPIO 11 (4 - 1 + 8 = 11).
+ If control-field UA1_RTS_SEL is set to 5, RTS pin of UART_1 will
+ be routed to GPIO 12 (5 - 1 + 8 = 12).
+ If control-field UA1_CTS_SEL is set to 6, CTS pin of UART_1 will
+ be routed to GPIO 13 (6 - 1 + 8 = 13).
+
+ Ex 2 (I2C channel 0):
+ If control-field I2C0_CLK_SEL is set to 20, CLK pin of I2C_0 will
+ be routed to GPIO 27 (20 - 1 + 8 = 27).
+ If control-field I2C0_DATA_SEL is set to 21, DATA pin of I2C_0
+ will be routed to GPIO 28 (21 - 1 + 9 = 28).
+
+ Totally, SP7021 has 120 peripheral pins. The peripheral pins can be
+ routed to any of 64 'fully pin-mux' pins.
+
+ (3) I/O processor pins
+ SP7021 has a built-in I/O processor.
+ Any GPIO pins (GPIO 0 to 98) can be set to pins of I/O processor.
+
+ Vendor property "sunplus,pins" is used to select "fully pin-mux" pins,
+ "I/O processor pins" and "digital GPIO" pins.
+
+ The device node of pin controller of Sunplus SP7021 has following
+ properties.
+
+properties:
+ compatible:
+ const: sunplus,sp7021-pctl
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ reg:
+ items:
+ - description: the MOON2 registers
+ - description: the GPIOXT registers
+ - description: the GPIOXT2 registers
+ - description: the FIRST registers
+ - description: the MOON1 registers
+
+ reg-names:
+ items:
+ - const: moon2
+ - const: gpioxt
+ - const: gpioxt2
+ - const: first
+ - const: moon1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+patternProperties:
+ '-pins$':
+ type: object
+ description: |
+ A pinctrl node should contain at least one subnodes representing the
+ pins or function-pins group available on the machine. Each subnode
+ will list the pins it needs, and how they should be configured.
+
+ Pinctrl node's client devices use subnodes for desired pin
+ configuration. Client device subnodes use below standard properties.
+
+ properties:
+ sunplus,pins:
+ description: |
+ Define 'sunplus,pins' which are used by pinctrl node's client
+ device.
+
+ It consists of one or more integers which represents the config
+ setting for corresponding pin. Each integer defines a individual
+ pin in which:
+
+ Bit 32~24: defines GPIO number. Its range is 0 ~ 98.
+ Bit 23~16: defines types: (1) fully pin-mux pins
+ (2) IO processor pins
+ (3) digital GPIO pins
+ Bit 15~8: defines pins of peripherals (which are defined in
+ 'include/dt-binging/pinctrl/sppctl.h').
+ Bit 7~0: defines types or initial-state of digital GPIO pins.
+
+ Please use macro SPPCTL_IOPAD to define the integers for pins.
+
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ function:
+ description: |
+ Define pin-function which is used by pinctrl node's client device.
+ The name should be one of string in the following enumeration.
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD,
+ UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ]
+
+ groups:
+ description: |
+ Define pin-group in a specified pin-function.
+ The name should be one of string in the following enumeration.
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2,
+ SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1,
+ HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ]
+
+ sunplus,zero_func:
+ description: |
+ This is a vendor specific property. It is used to disable pins
+ which are not used by pinctrl node's client device.
+ Some pins may be enabled by boot-loader. We can use this
+ property to disable them.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ additionalProperties: false
+
+ allOf:
+ - if:
+ properties:
+ function:
+ enum:
+ - SPI_FLASH
+ then:
+ properties:
+ groups:
+ enum:
+ - SPI_FLASH1
+ - SPI_FLASH2
+ - if:
+ properties:
+ function:
+ enum:
+ - SPI_FLASH_4BIT
+ then:
+ properties:
+ groups:
+ enum:
+ - SPI_FLASH_4BIT1
+ - SPI_FLASH_4BIT2
+ - if:
+ properties:
+ function:
+ enum:
+ - SPI_NAND
+ then:
+ properties:
+ groups:
+ enum:
+ - SPI_NAND
+ - if:
+ properties:
+ function:
+ enum:
+ - CARD0_EMMC
+ then:
+ properties:
+ groups:
+ enum:
+ - CARD0_EMMC
+ - if:
+ properties:
+ function:
+ enum:
+ - SD_CARD
+ then:
+ properties:
+ groups:
+ enum:
+ - SD_CARD
+ - if:
+ properties:
+ function:
+ enum:
+ - UA0
+ then:
+ properties:
+ groups:
+ enum:
+ - UA0
+ - if:
+ properties:
+ function:
+ enum:
+ - FPGA_IFX
+ then:
+ properties:
+ groups:
+ enum:
+ - FPGA_IFX
+ - if:
+ properties:
+ function:
+ enum:
+ - HDMI_TX
+ then:
+ properties:
+ groups:
+ enum:
+ - HDMI_TX1
+ - HDMI_TX2
+ - HDMI_TX3
+ - if:
+ properties:
+ function:
+ enum:
+ - LCDIF
+ then:
+ properties:
+ groups:
+ enum:
+ - LCDIF
+ - if:
+ properties:
+ function:
+ enum:
+ - USB0_OTG
+ then:
+ properties:
+ groups:
+ enum:
+ - USB0_OTG
+ - if:
+ properties:
+ function:
+ enum:
+ - USB1_OTG
+ then:
+ properties:
+ groups:
+ enum:
+ - USB1_OTG
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - "#gpio-cells"
+ - gpio-controller
+ - clocks
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/sppctl-sp7021.h>
+
+ pinctl@9c000100 {
+ compatible = "sunplus,sp7021-pctl";
+ reg = <0x9c000100 0x100>, <0x9c000300 0x80>, <0x9c000380 0x80>,
+ <0x9c0032e4 0x1c>, <0x9c000080 0x20>;
+ reg-names = "moon2", "gpioxt", "gpioxt2", "first", "moon1";
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clkc 0x83>;
+ resets = <&rstc 0x73>;
+
+ uart0-pins {
+ function = "UA0";
+ groups = "UA0";
+ };
+
+ spinand0-pins {
+ function = "SPI_NAND";
+ groups = "SPI_NAND";
+ };
+
+ uart1-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(11, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
+ SPPCTL_IOPAD(10, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
+ >;
+ };
+
+ uart2-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(20, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
+ SPPCTL_IOPAD(21, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
+ SPPCTL_IOPAD(22, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RTS, 0)
+ SPPCTL_IOPAD(23, SPPCTL_PCTL_G_PMUX, MUXF_UA1_CTS, 0)
+ >;
+ };
+
+ emmc-pins {
+ function = "CARD0_EMMC";
+ groups = "CARD0_EMMC";
+ };
+
+ sdcard-pins {
+ function = "SD_CARD";
+ groups = "SD_CARD";
+ sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
+ };
+
+ hdmi_A_tx1-pins {
+ function = "HDMI_TX";
+ groups = "HDMI_TX1";
+ };
+ hdmi_A_tx2-pins {
+ function = "HDMI_TX";
+ groups = "HDMI_TX2";
+ };
+ hdmi_A_tx3-pins {
+ function = "HDMI_TX";
+ groups = "HDMI_TX3";
+ };
+
+ ethernet-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
+ SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
+ SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
+ SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
+ SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
+ SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
+ SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
+ SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
+ SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
+ >;
+ sunplus,zero_func = <
+ MUXF_L2SW_LED_FLASH0
+ MUXF_L2SW_LED_ON0
+ MUXF_L2SW_P0_MAC_RMII_RXER
+ >;
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 13f9a84..6a11176 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15127,6 +15127,15 @@ L: linux-omap@xxxxxxxxxxxxxxx
S: Maintained
F: drivers/pinctrl/pinctrl-single.c
+PIN CONTROLLER - SUNPLUS / TIBBO
+M: Dvorkin Dmitry <dvorkin@xxxxxxxxx>
+M: Wells Lu <wellslutw@xxxxxxxxx>
+L: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated for non-subscribers)
+S: Maintained
+W: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+F: Documentation/devicetree/bindings/pinctrl/sunplus,*
+F: include/dt-bindings/pinctrl/sppctl*
+
PKTCDVD DRIVER
M: linux-block@xxxxxxxxxxxxxxx
S: Orphan
diff --git a/include/dt-bindings/pinctrl/sppctl-sp7021.h b/include/dt-bindings/pinctrl/sppctl-sp7021.h
new file mode 100644
index 0000000..6721bd4
--- /dev/null
+++ b/include/dt-bindings/pinctrl/sppctl-sp7021.h
@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/* Sunplus SP7021 dt-bindings Pinctrl header file
+ * Copyright (C) Sunplus Tech/Tibbo Tech.
+ * Author: Dvorkin Dmitry <dvorkin@xxxxxxxxx>
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_SPPCTL_SP7021_H__
+#define __DT_BINDINGS_PINCTRL_SPPCTL_SP7021_H__
+
+#include <dt-bindings/pinctrl/sppctl.h>
+
+/* Please don't change the order of the
+ * following defines. They are based on
+ * order of control register define of
+ * MOON2 and MOON4 registers.
+ */
+#define MUXF_GPIO 0
+#define MUXF_IOP 1
+#define MUXF_L2SW_CLK_OUT 2
+#define MUXF_L2SW_MAC_SMI_MDC 3
+#define MUXF_L2SW_LED_FLASH0 4
+#define MUXF_L2SW_LED_FLASH1 5
+#define MUXF_L2SW_LED_ON0 6
+#define MUXF_L2SW_LED_ON1 7
+#define MUXF_L2SW_MAC_SMI_MDIO 8
+#define MUXF_L2SW_P0_MAC_RMII_TXEN 9
+#define MUXF_L2SW_P0_MAC_RMII_TXD0 10
+#define MUXF_L2SW_P0_MAC_RMII_TXD1 11
+#define MUXF_L2SW_P0_MAC_RMII_CRSDV 12
+#define MUXF_L2SW_P0_MAC_RMII_RXD0 13
+#define MUXF_L2SW_P0_MAC_RMII_RXD1 14
+#define MUXF_L2SW_P0_MAC_RMII_RXER 15
+#define MUXF_L2SW_P1_MAC_RMII_TXEN 16
+#define MUXF_L2SW_P1_MAC_RMII_TXD0 17
+#define MUXF_L2SW_P1_MAC_RMII_TXD1 18
+#define MUXF_L2SW_P1_MAC_RMII_CRSDV 19
+#define MUXF_L2SW_P1_MAC_RMII_RXD0 20
+#define MUXF_L2SW_P1_MAC_RMII_RXD1 21
+#define MUXF_L2SW_P1_MAC_RMII_RXER 22
+#define MUXF_DAISY_MODE 23
+#define MUXF_SDIO_CLK 24
+#define MUXF_SDIO_CMD 25
+#define MUXF_SDIO_D0 26
+#define MUXF_SDIO_D1 27
+#define MUXF_SDIO_D2 28
+#define MUXF_SDIO_D3 29
+#define MUXF_PWM0 30
+#define MUXF_PWM1 31
+#define MUXF_PWM2 32
+#define MUXF_PWM3 33
+#define MUXF_PWM4 34
+#define MUXF_PWM5 35
+#define MUXF_PWM6 36
+#define MUXF_PWM7 37
+#define MUXF_ICM0_D 38
+#define MUXF_ICM1_D 39
+#define MUXF_ICM2_D 40
+#define MUXF_ICM3_D 41
+#define MUXF_ICM0_CLK 42
+#define MUXF_ICM1_CLK 43
+#define MUXF_ICM2_CLK 44
+#define MUXF_ICM3_CLK 45
+#define MUXF_SPIM0_INT 46
+#define MUXF_SPIM0_CLK 47
+#define MUXF_SPIM0_EN 48
+#define MUXF_SPIM0_DO 49
+#define MUXF_SPIM0_DI 50
+#define MUXF_SPIM1_INT 51
+#define MUXF_SPIM1_CLK 52
+#define MUXF_SPIM1_EN 53
+#define MUXF_SPIM1_DO 54
+#define MUXF_SPIM1_DI 55
+#define MUXF_SPIM2_INT 56
+#define MUXF_SPIM2_CLK 57
+#define MUXF_SPIM2_EN 58
+#define MUXF_SPIM2_DO 59
+#define MUXF_SPIM2_DI 60
+#define MUXF_SPIM3_INT 61
+#define MUXF_SPIM3_CLK 62
+#define MUXF_SPIM3_EN 63
+#define MUXF_SPIM3_DO 64
+#define MUXF_SPIM3_DI 65
+#define MUXF_SPI0S_INT 66
+#define MUXF_SPI0S_CLK 67
+#define MUXF_SPI0S_EN 68
+#define MUXF_SPI0S_DO 69
+#define MUXF_SPI0S_DI 70
+#define MUXF_SPI1S_INT 71
+#define MUXF_SPI1S_CLK 72
+#define MUXF_SPI1S_EN 73
+#define MUXF_SPI1S_DO 74
+#define MUXF_SPI1S_DI 75
+#define MUXF_SPI2S_INT 76
+#define MUXF_SPI2S_CLK 77
+#define MUXF_SPI2S_EN 78
+#define MUXF_SPI2S_DO 79
+#define MUXF_SPI2S_DI 80
+#define MUXF_SPI3S_INT 81
+#define MUXF_SPI3S_CLK 82
+#define MUXF_SPI3S_EN 83
+#define MUXF_SPI3S_DO 84
+#define MUXF_SPI3S_DI 85
+#define MUXF_I2CM0_CLK 86
+#define MUXF_I2CM0_DAT 87
+#define MUXF_I2CM1_CLK 88
+#define MUXF_I2CM1_DAT 89
+#define MUXF_I2CM2_CLK 90
+#define MUXF_I2CM2_DAT 91
+#define MUXF_I2CM3_CLK 92
+#define MUXF_I2CM3_DAT 93
+#define MUXF_UA1_TX 94
+#define MUXF_UA1_RX 95
+#define MUXF_UA1_CTS 96
+#define MUXF_UA1_RTS 97
+#define MUXF_UA2_TX 98
+#define MUXF_UA2_RX 99
+#define MUXF_UA2_CTS 100
+#define MUXF_UA2_RTS 101
+#define MUXF_UA3_TX 102
+#define MUXF_UA3_RX 103
+#define MUXF_UA3_CTS 104
+#define MUXF_UA3_RTS 105
+#define MUXF_UA4_TX 106
+#define MUXF_UA4_RX 107
+#define MUXF_UA4_CTS 108
+#define MUXF_UA4_RTS 109
+#define MUXF_TIMER0_INT 110
+#define MUXF_TIMER1_INT 111
+#define MUXF_TIMER2_INT 112
+#define MUXF_TIMER3_INT 113
+#define MUXF_GPIO_INT0 114
+#define MUXF_GPIO_INT1 115
+#define MUXF_GPIO_INT2 116
+#define MUXF_GPIO_INT3 117
+#define MUXF_GPIO_INT4 118
+#define MUXF_GPIO_INT5 119
+#define MUXF_GPIO_INT6 120
+#define MUXF_GPIO_INT7 121
+
+#define GROP_SPI_FLASH 122
+#define GROP_SPI_FLASH_4BIT 123
+#define GROP_SPI_NAND 124
+#define GROP_CARD0_EMMC 125
+#define GROP_SD_CARD 126
+#define GROP_UA0 127
+#define GROP_ACHIP_DEBUG 128
+#define GROP_ACHIP_UA2AXI 129
+#define GROP_FPGA_IFX 130
+#define GROP_HDMI_TX 131
+#define GROP_AUD_EXT_ADC_IFX0 132
+#define GROP_AUD_EXT_DAC_IFX0 133
+#define GROP_SPDIF_RX 134
+#define GROP_SPDIF_TX 135
+#define GROP_TDMTX_IFX0 136
+#define GROP_TDMRX_IFX0 137
+#define GROP_PDMRX_IFX0 138
+#define GROP_PCM_IEC_TX 139
+#define GROP_LCDIF 140
+#define GROP_DVD_DSP_DEBUG 141
+#define GROP_I2C_DEBUG 142
+#define GROP_I2C_SLAVE 143
+#define GROP_WAKEUP 144
+#define GROP_UART2AXI 145
+#define GROP_USB0_I2C 146
+#define GROP_USB1_I2C 147
+#define GROP_USB0_OTG 148
+#define GROP_USB1_OTG 149
+#define GROP_UPHY0_DEBUG 150
+#define GROP_UPHY1_DEBUG 151
+#define GROP_UPHY0_EXT 152
+#define GROP_PROBE_PORT 153
+
+#endif
diff --git a/include/dt-bindings/pinctrl/sppctl.h b/include/dt-bindings/pinctrl/sppctl.h
new file mode 100644
index 0000000..8b8ec66
--- /dev/null
+++ b/include/dt-bindings/pinctrl/sppctl.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/* Sunplus dt-bindings Pinctrl header file
+ * Copyright (C) Sunplus Tech/Tibbo Tech.
+ * Author: Dvorkin Dmitry <dvorkin@xxxxxxxxx>
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_SPPCTL_H__
+#define __DT_BINDINGS_PINCTRL_SPPCTL_H__
+
+#define IOP_G_MASTE (0x01 << 0)
+#define IOP_G_FIRST (0x01 << 1)
+
+#define SPPCTL_PCTL_G_PMUX (0x00 | IOP_G_MASTE)
+#define SPPCTL_PCTL_G_GPIO (IOP_G_FIRST | IOP_G_MASTE)
+#define SPPCTL_PCTL_G_IOPP (IOP_G_FIRST | 0x00)
+
+#define SPPCTL_PCTL_L_OUT (0x01 << 0) /* Output LOW */
+#define SPPCTL_PCTL_L_OU1 (0x01 << 1) /* Output HIGH */
+#define SPPCTL_PCTL_L_INV (0x01 << 2) /* Input Invert */
+#define SPPCTL_PCTL_L_ONV (0x01 << 3) /* Output Invert */
+#define SPPCTL_PCTL_L_ODR (0x01 << 4) /* Output Open Drain */
+
+#define SPPCTL_PCTLE_P(v) ((v) << 24)
+#define SPPCTL_PCTLE_G(v) ((v) << 16)
+#define SPPCTL_PCTLE_F(v) ((v) << 8)
+#define SPPCTL_PCTLE_L(v) ((v) << 0)
+
+#define SPPCTL_PCTLD_P(v) (((v) >> 24) & 0xff)
+#define SPPCTL_PCTLD_G(v) (((v) >> 16) & 0xff)
+#define SPPCTL_PCTLD_F(v) (((v) >> 8) & 0xff)
+#define SPPCTL_PCTLD_L(v) (((v) >> 0) & 0xff)
+
+/*
+ * pack into 32-bit value:
+ * pin#(8bit), typ(8bit), function(8bit), flag(8bit)
+ */
+#define SPPCTL_IOPAD(pin, typ, fun, flg) (((pin) << 24) | ((typ) << 16) | \
+ ((fun) << 8) | (flg))
+
+#endif
--
2.7.4
