On Sun, Nov 28, 2021 at 7:19 AM Adam Ford <aford173@xxxxxxxxx> wrote: > > The i.MX8M Nano is similar to the i.MX8M Mini in some ways, but very > different in others. With the blk-ctrl driver for Mini in place, > this series expands the blk-ctrl driver to support the Nano which > opens the door for additional functions in the future. As part of > this series, it also addresses some issues in the GPCv2 driver and > finally adds support for enabling USB and GPU. > > V4: Rebase on top of [1] which fixes hangs caused from CSI and DSI reset > and add the same fixes for CSI and DSI to the Nano > V3: Fixes an the yaml example > V2: Fixes the clock count in the blk-ctrl > > [1] - https://www.spinics.net/lists/arm-kernel/msg936266.html > Shawn, This series should apply cleanly against your tree now that [1] has been applied to your tree. Should I submit this a resend or are you able to test the build now? adam > Adam Ford (9): > soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled > soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn > dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains > dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl > soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl > arm64: dts: imx8mn: add GPC node > arm64: dts: imx8mn: put USB controller into power-domains > arm64: dts: imx8mn: add DISP blk-ctrl > arm64: dts: imx8mn: Enable GPU > > .../soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml | 97 +++++++++++++++++ > arch/arm64/boot/dts/freescale/imx8mn.dtsi | 103 ++++++++++++++++++ > drivers/soc/imx/gpcv2.c | 26 +++++ > drivers/soc/imx/imx8m-blk-ctrl.c | 77 ++++++++++++- > include/dt-bindings/power/imx8mn-power.h | 5 + > 5 files changed, 307 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml > > -- > 2.32.0 >
