Hi Shawn,
Thank you for the review and sorry for the noise. I'll apply the
changes and send v2.
Regards
Yunus
Am Montag, dem 06.12.2021 um 10:49 +0800 schrieb Shawn Guo:
> On Tue, Nov 30, 2021 at 09:53:54AM +0100, Yunus Bas wrote:
> > The PEB-AV-02 expansion adapter extends the phyBOARD-Mira boards to
> > connect parallel LCD displays, either with capacitive or resistive
> > touch.
> >
> > Signed-off-by: Yunus Bas <y.bas@xxxxxxxxx>
> > ---
> > .../boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 1 +
> > .../boot/dts/imx6q-phytec-mira-rdk-emmc.dts | 1 +
> > .../boot/dts/imx6q-phytec-mira-rdk-nand.dts | 1 +
> > .../dts/imx6qdl-phytec-mira-peb-av-02.dtsi | 122
> > ++++++++++++++++++
> > .../boot/dts/imx6qp-phytec-mira-rdk-nand.dts | 1 +
> > 5 files changed, 126 insertions(+)
> > create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-
> > 02.dtsi
> >
> > diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
> > b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
> > index b057fa664a6b..8165fae2b1d1 100644
> > --- a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
> > +++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
> > @@ -9,6 +9,7 @@
> > #include "imx6qdl-phytec-phycore-som.dtsi"
> > #include "imx6qdl-phytec-mira.dtsi"
> > #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> > +#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
> >
> > / {
> > model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board
> > with NAND";
> > diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
> > b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
> > index db6e2cc36759..bbf5097ca974 100644
> > --- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
> > +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
> > @@ -9,6 +9,7 @@
> > #include "imx6qdl-phytec-phycore-som.dtsi"
> > #include "imx6qdl-phytec-mira.dtsi"
> > #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> > +#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
> >
> > / {
> > model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with
> > eMMC";
> > diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
> > b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
> > index 51ff601b1aec..95051e18324f 100644
> > --- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
> > +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
> > @@ -9,6 +9,7 @@
> > #include "imx6qdl-phytec-phycore-som.dtsi"
> > #include "imx6qdl-phytec-mira.dtsi"
> > #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> > +#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
> >
> > / {
> > model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with
> > NAND";
> > diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
> > b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
> > new file mode 100644
> > index 000000000000..671e8024cba5
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
> > @@ -0,0 +1,122 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (C) 2018 PHYTEC Messtechnik
> > + * Author: Christian Hemp <c.hemp@xxxxxxxxx>
> > + */
> > +
> > +/ {
> > +
> > + display: display@di0 {
>
> di0 being unit-address?
In this case it's not a unit-address. It's a part of the node name. But
I can understand that this is confusing. I'm going to remove the lesser
part.
>
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "fsl,imx-parallel-display";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_disp0>;
> > + interface-pix-fmt = "rgb24";
> > + status = "disabled";
> > +
> > + port@0 {
> > + reg = <0>;
> > +
> > + display0_in: endpoint {
> > + remote-endpoint =
> > <&ipu1_di0_disp0>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > +
> > + display0_out: endpoint {
> > + remote-endpoint =
> > <&peb_panel_lcd_in>;
> > + };
> > + };
> > + };
> > +
> > + panel-lcd {
> > + compatible = "edt,etm0700g0edh6";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_disp0_pwr>;
> > + power-supply = <®_display>;
> > + enable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> > + backlight = <&backlight>;
> > + status = "disabled";
> > +
> > + port {
> > + peb_panel_lcd_in: endpoint {
> > + remote-endpoint = <&display0_out>;
> > + };
> > + };
> > + };
> > +
> > + reg_display: regulator-peb-display {
> > + compatible = "regulator-fixed";
> > + regulator-name = "peb-display";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + };
> > +};
> > +
> > +&i2c1 {
> > + edt_ft5x06: touchscreen@38 {
> > + compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
>
> Did you run make dtbs_check against bindings?
>
> Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
>
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_edt_ft5x06>;
> > + reg = <0x38>;
> > + interrupt-parent = <&gpio3>;
> > + interrupts = <2 IRQ_TYPE_NONE>;
> > + status = "disabled";
> > + };
> > +};
> > +
> > +&ipu1_di0_disp0 {
> > + remote-endpoint = <&display0_in>;
> > +};
> > +
> > +&iomuxc {
> > + pinctrl_disp0: disp0grp {
> > + fsl,pins = <
> > + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK
> > 0x10
> > + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02
> > 0x10
> > + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03
> > 0x10
> > +
>
> Drop the newline.
>
> > + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15
> > 0x1b080
> > +
>
> Ditto
>
> Shawn
>
> > + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22
> > 0x10
> > + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23
> > 0x10
> > + >;
> > + };
> > +
> > + pinctrl_disp0_pwr: disp0pwrgrp {
> > + fsl,pins = <
> > + MX6QDL_PAD_EIM_D22__GPIO3_IO22
> > 0x1b0b0
> > + >;
> > + };
> > +
> > + pinctrl_edt_ft5x06: edtft5x06grp {
> > + fsl,pins = <
> > + MX6QDL_PAD_EIM_DA2__GPIO3_IO02
> > 0xb0b1
> > + >;
> > + };
> > +};
> > diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
> > b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
> > index 06fe0c5315fc..343639cb035c 100644
> > --- a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
> > +++ b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
> > @@ -9,6 +9,7 @@
> > #include "imx6qdl-phytec-phycore-som.dtsi"
> > #include "imx6qdl-phytec-mira.dtsi"
> > #include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
> > +#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
> >
> > / {
> > model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with
> > NAND";
> > --
> > 2.25.1
> >
