This patch update DT binding to support INn_MODE init_data. Each
input signal path can be configurated either as a Analogue or
Digital using the INn_MODE registers.
Signed-off-by: Inha Song <ideal.song@xxxxxxxxxxx>
Reviewed-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/mfd/arizona.txt | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 5c7e723..7bd1273 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -42,6 +42,13 @@ Optional properties:
the chip default will be used. If present exactly five values must
be specified.
+ - wlf,inmode : A list of INn_MODE register values, where n is the number
+ of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
+ 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
+ If present, values must be specified less than or equal to the number of
+ input singals. If values less than the number of input signals, elements
+ that has not been specifed are set to 0 by default.
+
- DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
they are being externally supplied. As covered in
Documentation/devicetree/bindings/regulator/regulator.txt
--
2.0.0.390.gcb682f8
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
