Re: [PATCH v3 6/6] PM / devfreq: Add a driver for the sun8i/sun50i MBUS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21. 11. 18. 오후 12:18, Samuel Holland wrote:
This driver works by adjusting the divider on the DRAM controller's
module clock. Thus there is no fixed set of OPPs, only "full speed" down
to "quarter speed" (or whatever the maximum divider is on that variant).

It makes use of the MDFS hardware in the MBUS, in "DFS" mode, which
takes care of updating registers during the critical section while DRAM
is inaccessible.

This driver should support several sunxi SoCs, starting with the A33,
which have a DesignWare DDR3 controller with merged PHY register space
and the matching MBUS register layout (so not A63 or later). However,
the driver has only been tested on the A64/H5, so those are the only
compatibles enabled for now.

Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
---
  drivers/devfreq/Kconfig          |   8 +
  drivers/devfreq/Makefile         |   1 +
  drivers/devfreq/sun8i-a33-mbus.c | 511 +++++++++++++++++++++++++++++++
  3 files changed, 520 insertions(+)
  create mode 100644 drivers/devfreq/sun8i-a33-mbus.c


(snip)

Applied it. Thanks.


--
Best Regards,
Samsung Electronics
Chanwoo Choi



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux