On Wed, 20 Aug 2014, Chris Zhong wrote:
The RK808 chip is a power management IC for multimedia and handheld
devices. It contains the following components:
- Regulators
- RTC
The rk808 core driver is registered as a platform driver and provides
communication through I2C with the host device for the different
components.
Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
---
Changes in v2:
Adviced by Mark Browm:
- change of_find_node_by_name to find_child_by_name
- use RK808_NUM_REGULATORS as the name of the constant
- create a pdata when missing platform data
- use the rk808_reg name to supply_regulator name
- replace regulator_register with devm_regulator_register
- some other problem with coding style
drivers/mfd/Kconfig | 13 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/rk808.c | 297 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/rk808.h | 219 +++++++++++++++++++++++++++++++++
4 files changed, 530 insertions(+)
create mode 100644 drivers/mfd/rk808.c
create mode 100644 include/linux/mfd/rk808.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index de5abf2..1df133e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -582,6 +582,19 @@ config MFD_RC5T583
Additional drivers must be enabled in order to use the
different functionality of the device.
+config MFD_RK808
+ tristate "Rockchip RK808 Power Management chip"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
<---------------------- Use more of the allotted space ----------------------->
+ Select this option to get support for the RK808 Power
+ Management system device.
What's a 'system device', and how does that differ to a controller?
+ This driver provides common support for accessing the device
+ through i2c interface. The device supports multiple sub-devices
s/i2c/I2C/
+ like interrupts, RTC, LDO and DCDC regulators, onkey.
s/like/including/
I would s/and/&/, then put an "and" before "onkey".
this, this, this 'and' that.
config MFD_SEC_CORE
bool "SAMSUNG Electronics PMIC Series Support"
depends on I2C=y
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f001487..dbc28e7 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -160,6 +160,7 @@ obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
obj-$(CONFIG_MFD_PALMAS) += palmas.o
obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
+obj-$(CONFIG_MFD_RK808) += rk808.o
obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
obj-$(CONFIG_MFD_SYSCON) += syscon.o
obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
new file mode 100644
index 0000000..667cfdf
--- /dev/null
+++ b/drivers/mfd/rk808.c
@@ -0,0 +1,297 @@
+/*
+ * Mfd core driver for Rockchip RK808
s/Mfd/MFD
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author: Chris Zhong <zyw@xxxxxxxxxxxxxx>
+ * Author: Zhang Qing <zhangqing@xxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
Remove this line.
+ */
+
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/rk808.h>
+#include <linux/mfd/core.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
I'm pretty sure you don't need all of these includes.
Remove the ones you're not using.
+struct rk808_reg_data {
+ int addr;
+ int mask;
+ int value;
+};
+
+static struct rk808 *g_rk808;
Grim.
+static struct resource rtc_resources[] = {
+ {
+ .start = RK808_IRQ_RTC_ALARM,
+ .end = RK808_IRQ_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static const struct mfd_cell rk808s[] = {
+ {
+ .name = "rk808-regulator",
+ },
+ {
+ .name = "rk808-rtc",
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resources = &rtc_resources[0],
+ },
+ {
+ .name = "rk808-clkout",
+ },
Can you reorder these, with the single liners at the start and
actually make them one line, so:
{ .name = "rk808-clkout" },
{ .name = "rk808-regulator" },
{
.name = "rk808-rtc",
.num_resources = ARRAY_SIZE(rtc_resources),
.resources = &rtc_resources[0],
},
This also happens to be alphabetical.
+};
+
+static const struct rk808_reg_data pre_init_reg[] = {
+ {RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA},
+ {RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA},
+ {RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA},
+ {RK808_BUCK1_CONFIG_REG, BUCK1_RATE_MASK, BUCK_ILMIN_200MA},
+ {RK808_BUCK2_CONFIG_REG, BUCK2_RATE_MASK, BUCK_ILMIN_200MA},
+ {RK808_VB_MON_REG, MASK_ALL, VB_LO_ACT | VB_LO_SEL_3500MV},
+ {RK808_INT_STS_REG1, MASK_NONE, 0},
+ {RK808_INT_STS_REG2, MASK_NONE, 0},
+};
Can you also line up the third column?
/me likes straight lines.
+static const struct regmap_irq rk808_irqs[] = {
+ /* INT_STS */
+ [RK808_IRQ_VOUT_LO] = {
+ .mask = RK808_IRQ_VOUT_LO_MSK,
+ .reg_offset = 0,
+ },
+ [RK808_IRQ_VB_LO] = {
+ .mask = RK808_IRQ_VB_LO_MSK,
+ .reg_offset = 0,
+ },
+ [RK808_IRQ_PWRON] = {
+ .mask = RK808_IRQ_PWRON_MSK,
+ .reg_offset = 0,
+ },
+ [RK808_IRQ_PWRON_LP] = {
+ .mask = RK808_IRQ_PWRON_LP_MSK,
+ .reg_offset = 0,
+ },
+ [RK808_IRQ_HOTDIE] = {
+ .mask = RK808_IRQ_HOTDIE_MSK,
+ .reg_offset = 0,
+ },
+ [RK808_IRQ_RTC_ALARM] = {
+ .mask = RK808_IRQ_RTC_ALARM_MSK,
+ .reg_offset = 0,
+ },
+ [RK808_IRQ_RTC_PERIOD] = {
+ .mask = RK808_IRQ_RTC_PERIOD_MSK,
+ .reg_offset = 0,
+ },
+
+ /* INT_STS2 */
+ [RK808_IRQ_PLUG_IN_INT] = {
+ .mask = RK808_IRQ_PLUG_IN_INT_MSK,
+ .reg_offset = 1,
+ },
+ [RK808_IRQ_PLUG_OUT_INT] = {
+ .mask = RK808_IRQ_PLUG_OUT_INT_MSK,
+ .reg_offset = 1,
+ },
+};
+
+static struct regmap_irq_chip rk808_irq_chip = {
+ .name = "rk808",
+ .irqs = rk808_irqs,
+ .num_irqs = ARRAY_SIZE(rk808_irqs),
+ .num_regs = 2,
+ .irq_reg_stride = 2,
+ .status_base = RK808_INT_STS_REG1,
+ .mask_base = RK808_INT_STS_MSK_REG1,
+ .ack_base = RK808_INT_STS_REG1,
+};
+
+static struct rk808_board *rk808_parse_dt(struct device *dev)
+{
+ struct rk808_board *pdata;
+ struct device_node *np = dev->of_node;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
As you check for IS_ERR() you need to return -ENOMEM here, not NULL.
+ pdata->pm_off = of_property_read_bool(np,
+ "rockchip,system-power-controller");
+
+ return pdata;
+}
+
+static void rk808_device_shutdown(void)
+{
+ int ret;
+ struct rk808 *rk808 = g_rk808;
+
+ if (!rk808) {
+ dev_err(rk808->dev, "%s have no g_rk808\n", __func__);
Can you issue a more user friendly message? Users don't normally care
about kernel structs and function names and kernel devs know now to
grep through kernel source.
+ return;
+ }
+
+ ret = regmap_update_bits(rk808->regmap,
+ RK808_DEVCTRL_REG,
+ DEV_OFF_RST, DEV_OFF_RST);
+ if (ret < 0)
You can just check for 'if (ret)' here - it's a little tidier.
+ dev_err(rk808->dev, "rk808 power off error!\n");
No need to put "rk808", dev_err() will do that for you.
+}
+
+static int rk808_pre_init(struct rk808 *rk808)
+{
+ int i;
+ int ret = 0;
Unless someone surreptitiously removes 'pre_init_reg', 'table_size'
will never be 0, so there is no need to pre-initialise 'ret'. I've
also just noticed that you return 0 anyway, so definitely no
requirement to initialise.
+ int table_size = sizeof(pre_init_reg) / sizeof(struct rk808_reg_data);
ARRAY_SIZE()?
+ for (i = 0; i < table_size; i++) {
+ ret = regmap_update_bits(rk808->regmap, pre_init_reg[i].addr,
+ pre_init_reg[i].mask,
+ pre_init_reg[i].value);
+ if (ret < 0) {
if (ret)
+ dev_err(rk808->dev,
+ "0x%x write err\n", pre_init_reg[i].addr);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int rk808_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ uint32_t val;
+ struct rk808_board *pdata = dev_get_platdata(&client->dev);
+ struct rk808 *rk808;
Personal preference alert: Can you put the structs declarations, above
the smaller ones.
+ if (!pdata) {
+ pdata = rk808_parse_dt(&client->dev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+ }
+
+ rk808 = devm_kzalloc(&client->dev, sizeof(struct rk808), GFP_KERNEL);
sizeof(*rk808)
+ if (!rk808)
+ return -ENOMEM;
+
+ rk808->pdata = pdata;
Remove pdata from 'struct rk808'. You can obtain it from dev.
+ rk808->i2c = client;
+ rk808->dev = &client->dev;
Remove dev from 'struct rk808', you can obtain it from i2c.
+ i2c_set_clientdata(client, rk808);
+
+ rk808->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
+ if (IS_ERR(rk808->regmap)) {
+ ret = PTR_ERR(rk808->regmap);
This line is wasted, just:
return PTR_ERR(rk808->regmap);
+ dev_err(rk808->dev, "regmap initialization failed\n");
+ return ret;
+ }
+
+ ret = rk808_pre_init(rk808);
+ if (ret < 0) {
if (ret)
+ dev_err(rk808->dev, "The rk808_pre_init failed %d\n", ret);
Remove this, you already have an error message in rk808_pre_init().
+ return ret;
+ }
+
+ pdata->irq = client->irq;
+ pdata->irq_base = -1;
When is this used after regmap_add_irq_chip()?
+ if (!pdata->irq) {
Best to check client->irq, then populate pdata->irq if and only if the
test passes. Actually, why are you putting it in pdata in the first
place? You already have it in 'client', which you have access to?
+ dev_err(rk808->dev, "No interrupt support, no core IRQ\n");
+ return -EINVAL;
+ }
+
+ ret = regmap_add_irq_chip(rk808->regmap, pdata->irq,
+ IRQF_ONESHOT, pdata->irq_base,
+ &rk808_irq_chip, &rk808->irq_data);
+ if (ret < 0) {
if (ret)
Same for the rest of the file.
+ dev_err(rk808->dev, "Failed to add irq_chip %d\n", ret);
+ return ret;
+ }
+
+ ret = mfd_add_devices(rk808->dev, -1,
+ rk808s, ARRAY_SIZE(rk808s),
+ NULL, 0, regmap_irq_get_domain(rk808->irq_data));
+ if (ret < 0) {
+ dev_err(rk808->dev, "failed to add MFD devices %d\n", ret);
+ goto err_irq_init_done;
The "_done" part is confusing. "done" to me says "completed successfully".
+ }
+
+ g_rk808 = rk808;
+ if (pdata->pm_off && !pm_power_off)
+ pm_power_off = rk808_device_shutdown;
+
+ return 0;
+
+err_irq_init_done:
+ regmap_del_irq_chip(pdata->irq, rk808->irq_data);
+ return ret;
+}
+
+static int rk808_remove(struct i2c_client *i2c)
Why do you call it 'i2c' there and 'client' in probe? Please
standardise.
+{
+ struct rk808 *rk808 = i2c_get_clientdata(i2c);
+ struct rk808_board *pdata = rk808->pdata;
+
+ regmap_del_irq_chip(pdata->irq, rk808->irq_data);
Isn't pdata->irq already in i2c->irq?
+ mfd_remove_devices(rk808->dev);
And dev already in i2c->dev?
+ return 0;
+}
+
+static struct of_device_id rk808_of_match[] = {
+ { .compatible = "rockchip,rk808"},
You keep missing a space before '}'.
+ { },
+};
+MODULE_DEVICE_TABLE(of, rk808_of_match);
+
+static const struct i2c_device_id rk808_ids[] = {
+ { "rk808", 0},
Remove the second attribute, as it's never used.
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, rk808_ids);
+
+static struct i2c_driver rk808_i2c_driver = {
+ .driver = {
+ .name = "rk808",
+ .owner = THIS_MODULE,
Remove this line, it's taken care of for you elsewhere.
+ .of_match_table = of_match_ptr(rk808_of_match),
+ },
+ .probe = rk808_probe,
+ .remove = rk808_remove,
+ .id_table = rk808_ids,
+};
+
+module_i2c_driver(rk808_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Chris Zhong <zyw@xxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Zhang Qing<zhangqing@xxxxxxxxxxxxxx>");
Space after author's name.
Other author probably should add his Sign-off-by.
+MODULE_DESCRIPTION("rk808 PMIC driver");
RK808
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
new file mode 100644
index 0000000..6835327
--- /dev/null
+++ b/include/linux/mfd/rk808.h
@@ -0,0 +1,219 @@
+/*
+ * rk808.h for Rockchip RK808
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author: Chris Zhong <zyw@xxxxxxxxxxxxxx>
+ * Author: Zhang Qing <zhangqing@xxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
Remove this line.
+ */
+
+#ifndef __LINUX_REGULATOR_rk808_H
+#define __LINUX_REGULATOR_rk808_H
+
+#include <linux/regulator/machine.h>
+#include <linux/regmap.h>
+
+/*
+ * rk808 Global Register Map.
+ */
+
+#define RK808_DCDC1 0 /* (0+RK808_START) */
+#define RK808_LDO1 4 /* (4+RK808_START) */
+#define RK808_NUM_REGULATORS 14
+
+#define RK808_ID_DCDC1 0
+#define RK808_ID_DCDC2 1
+#define RK808_ID_DCDC3 2
+#define RK808_ID_DCDC4 3
+#define RK808_ID_LDO1 4
+#define RK808_ID_LDO2 5
+#define RK808_ID_LDO3 6
+#define RK808_ID_LDO4 7
+#define RK808_ID_LDO5 8
+#define RK808_ID_LDO6 9
+#define RK808_ID_LDO7 10
+#define RK808_ID_LDO8 11
+#define RK808_ID_SWITCH1 12
+#define RK808_ID_SWITCH2 13
Aren't these better off as enums?
+#define RK808_SECONDS_REG 0x00
+#define RK808_MINUTES_REG 0x01
+#define RK808_HOURS_REG 0x02
+#define RK808_DAYS_REG 0x03
+#define RK808_MONTHS_REG 0x04
+#define RK808_YEARS_REG 0x05
+#define RK808_WEEKS_REG 0x06
+#define RK808_ALARM_SECONDS_REG 0x08
+#define RK808_ALARM_MINUTES_REG 0x09
+#define RK808_ALARM_HOURS_REG 0x0a
+#define RK808_ALARM_DAYS_REG 0x0b
+#define RK808_ALARM_MONTHS_REG 0x0c
+#define RK808_ALARM_YEARS_REG 0x0d
+#define RK808_RTC_CTRL_REG 0x10
+#define RK808_RTC_STATUS_REG 0x11
+#define RK808_RTC_INT_REG 0x12
+#define RK808_RTC_COMP_LSB_REG 0x13
+#define RK808_RTC_COMP_MSB_REG 0x14
+#define RK808_CLK32OUT_REG 0x20
+#define RK808_VB_MON_REG 0x21
+#define RK808_THERMAL_REG 0x22
+#define RK808_DCDC_EN_REG 0x23
+#define RK808_LDO_EN_REG 0x24
+#define RK808_SLEEP_SET_OFF_REG1 0x25
+#define RK808_SLEEP_SET_OFF_REG2 0x26
+#define RK808_DCDC_UV_STS_REG 0x27
+#define RK808_DCDC_UV_ACT_REG 0x28
+#define RK808_LDO_UV_STS_REG 0x29
+#define RK808_LDO_UV_ACT_REG 0x2a
+#define RK808_DCDC_PG_REG 0x2b
+#define RK808_LDO_PG_REG 0x2c
+#define RK808_VOUT_MON_TDB_REG 0x2d
+#define RK808_BUCK1_CONFIG_REG 0x2e
+#define RK808_BUCK1_ON_VSEL_REG 0x2f
+#define RK808_BUCK1_SLP_VSEL_REG 0x30
+#define RK808_BUCK1_DVS_VSEL_REG 0x31
+#define RK808_BUCK2_CONFIG_REG 0x32
+#define RK808_BUCK2_ON_VSEL_REG 0x33
+#define RK808_BUCK2_SLP_VSEL_REG 0x34
+#define RK808_BUCK2_DVS_VSEL_REG 0x35
+#define RK808_BUCK3_CONFIG_REG 0x36
+#define RK808_BUCK4_CONFIG_REG 0x37
+#define RK808_BUCK4_ON_VSEL_REG 0x38
+#define RK808_BUCK4_SLP_VSEL_REG 0x39
+#define RK808_BOOST_CONFIG_REG 0x3a
+#define RK808_LDO1_ON_VSEL_REG 0x3b
+#define RK808_LDO1_SLP_VSEL_REG 0x3c
+#define RK808_LDO2_ON_VSEL_REG 0x3d
+#define RK808_LDO2_SLP_VSEL_REG 0x3e
+#define RK808_LDO3_ON_VSEL_REG 0x3f
+#define RK808_LDO3_SLP_VSEL_REG 0x40
+#define RK808_LDO4_ON_VSEL_REG 0x41
+#define RK808_LDO4_SLP_VSEL_REG 0x42
+#define RK808_LDO5_ON_VSEL_REG 0x43
+#define RK808_LDO5_SLP_VSEL_REG 0x44
+#define RK808_LDO6_ON_VSEL_REG 0x45
+#define RK808_LDO6_SLP_VSEL_REG 0x46
+#define RK808_LDO7_ON_VSEL_REG 0x47
+#define RK808_LDO7_SLP_VSEL_REG 0x48
+#define RK808_LDO8_ON_VSEL_REG 0x49
+#define RK808_LDO8_SLP_VSEL_REG 0x4a
+#define RK808_DEVCTRL_REG 0x4b
+#define RK808_INT_STS_REG1 0x4c
+#define RK808_INT_STS_MSK_REG1 0x4d
+#define RK808_INT_STS_REG2 0x4e
+#define RK808_INT_STS_MSK_REG2 0x4f
+#define RK808_IO_POL_REG 0x50
+
+/* IRQ Definitions */
+#define RK808_IRQ_VOUT_LO 0
+#define RK808_IRQ_VB_LO 1
+#define RK808_IRQ_PWRON 2
+#define RK808_IRQ_PWRON_LP 3
+#define RK808_IRQ_HOTDIE 4
+#define RK808_IRQ_RTC_ALARM 5
+#define RK808_IRQ_RTC_PERIOD 6
+#define RK808_IRQ_PLUG_IN_INT 7
+#define RK808_IRQ_PLUG_OUT_INT 8
+#define RK808_NUM_IRQ 9
+
+#define RK808_IRQ_VOUT_LO_MSK BIT(0)
+#define RK808_IRQ_VB_LO_MSK BIT(1)
+#define RK808_IRQ_PWRON_MSK BIT(2)
+#define RK808_IRQ_PWRON_LP_MSK BIT(3)
+#define RK808_IRQ_HOTDIE_MSK BIT(4)
+#define RK808_IRQ_RTC_ALARM_MSK BIT(5)
+#define RK808_IRQ_RTC_PERIOD_MSK BIT(6)
+#define RK808_IRQ_PLUG_IN_INT_MSK BIT(0)
+#define RK808_IRQ_PLUG_OUT_INT_MSK BIT(1)
+
+#define RK808_VBAT_LOW_2V8 0x00
+#define RK808_VBAT_LOW_2V9 0x01
+#define RK808_VBAT_LOW_3V0 0x02
+#define RK808_VBAT_LOW_3V1 0x03
+#define RK808_VBAT_LOW_3V2 0x04
+#define RK808_VBAT_LOW_3V3 0x05
+#define RK808_VBAT_LOW_3V4 0x06
+#define RK808_VBAT_LOW_3V5 0x07
+#define VBAT_LOW_VOL_MASK (0x07 << 0)
+#define EN_VABT_LOW_SHUT_DOWN (0x00 << 4)
+#define EN_VBAT_LOW_IRQ (0x1 << 4)
+#define VBAT_LOW_ACT_MASK (0x1 << 4)
+
+#define BUCK_ILMIN_MASK (7 << 0)
+#define BOOST_ILMIN_MASK (7 << 0)
+#define BUCK1_RATE_MASK (3<<3)
+#define BUCK2_RATE_MASK (3<<3)
+#define MASK_ALL 0xff
+#define MASK_NONE 0
+
+#define SWITCH2_EN BIT(6)
+#define SWITCH1_EN BIT(5)
+
+#define VB_LO_ACT BIT(4)
+#define VB_LO_SEL_3500MV (7<<0)
Spaces around the '<<'. Same everywhere else too.
+#define VOUT_LO_INT BIT(0)
+#define CLK32KOUT2_EN BIT(0)
+
+enum {
+ BUCK_ILMIN_50MA,
+ BUCK_ILMIN_100MA,
+ BUCK_ILMIN_150MA,
+ BUCK_ILMIN_200MA,
+ BUCK_ILMIN_250MA,
+ BUCK_ILMIN_300MA,
+ BUCK_ILMIN_350MA,
+ BUCK_ILMIN_400MA,
+};
+
+enum {
+ BOOST_ILMIN_75MA,
+ BOOST_ILMIN_100MA,
+ BOOST_ILMIN_125MA,
+ BOOST_ILMIN_150MA,
+ BOOST_ILMIN_175MA,
+ BOOST_ILMIN_200MA,
+ BOOST_ILMIN_225MA,
+ BOOST_ILMIN_250MA,
+};
+
+struct rk808_board {
+ int irq;
+ int irq_base;
+ int wakeup;
+ bool pm_off;
+ struct regulator_init_data *rk808_init_data[RK808_NUM_REGULATORS];
+ struct device_node *of_node[RK808_NUM_REGULATORS];
This is unusual? Although, I haven't seen the client driver.
+ int pmic_sleep_gpio;
+ unsigned int dcdc_slp_voltage[3]; /* buckx_voltage in uV */
+ unsigned int ldo_slp_voltage[7];
+};
+
+struct rk808 {
+ struct rk808_board *pdata;
+ struct device *dev;
+ struct i2c_client *i2c;
+ int num_regulators;
+ struct regulator_dev **rdev;
+ struct regmap_irq_chip_data *irq_data;
+ struct regmap *regmap;
+ unsigned int dcdc_slp_voltage[3]; /* buckx_voltage in uV */
+ unsigned int ldo_slp_voltage[7];
+};
+
+static const struct regmap_config rk808_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RK808_IO_POL_REG,
+};
Why is this in the header file.
+#endif
Place a comment on the same line:
#endif /* __LINUX_REGULATOR_rk808_H */
