On Wed, Dec 08, 2021 at 03:41:24PM +0100, Ulf Hansson wrote:
> On Mon, 6 Dec 2021 at 15:29, Mårten Lindahl <marten.lindahl@xxxxxxxx> wrote:
> >
> > Current dw_mci driver supports a TMOUT register which consists of a 24
> > bit field (TMOUT[31:8]) for the DATA_TIMEOUT. The maximum value of this
> > field is 0xFFFFFF, which with a 200MHz clock will give a full DRTO of:
> >
> > 0xFFFFFF / 200000000 => ~84 ms
> >
> > However, the ARTPEC-8 SoC DWMMC IP version has a TMOUT register with an
> > extended DATA_TIMEOUT field, which supports longer timers for the DRTO.
> > In this version the DATA_TIMEOUT field is split into two, which with the
> > same 200MHz clock as above will allow a maximum timeout of:
> >
> > ((TMOUT[10:8] -1) * 0xFFFFFF + TMOUT[31:11] * 8) / 200000000 => ~587 ms
> >
> > Add a quirk to support this. The quirk is enabled for ARTPEC-8 SoCs.
> >
> > Signed-off-by: Mårten Lindahl <marten.lindahl@xxxxxxxx>
> > ---
> >
> > v2:
> > - Removed unnecessary comment
> > - Change 1<<0 to BIT(0)
> >
> > drivers/mmc/host/dw_mmc-exynos.c | 5 +++++
> > drivers/mmc/host/dw_mmc.c | 33 ++++++++++++++++++++++++++++----
> > drivers/mmc/host/dw_mmc.h | 6 ++++++
> > 3 files changed, 40 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
> > index 86486e6659de..1b625642c5b4 100644
> > --- a/drivers/mmc/host/dw_mmc-exynos.c
> > +++ b/drivers/mmc/host/dw_mmc-exynos.c
> > @@ -127,6 +127,11 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)
> > DQS_CTRL_GET_RD_DELAY(priv->saved_strobe_ctrl);
> > }
> >
> > + if (priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) {
> > + /* Quirk needed for ARTPEC-8 SoCs */
> > + host->quirks |= DW_MMC_QUIRK_EXTENDED_TMOUT;
> > + }
> > +
> > host->bus_hz /= (priv->ciu_div + 1);
> >
> > return 0;
> > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> > index f2a14a434bef..45ea9fd97a6a 100644
> > --- a/drivers/mmc/host/dw_mmc.c
> > +++ b/drivers/mmc/host/dw_mmc.c
> > @@ -1289,6 +1289,7 @@ static void dw_mci_set_data_timeout(struct dw_mci *host,
> > {
> > u32 clk_div, tmout;
> > u64 tmp;
> > + unsigned int tmp2;
> >
> > clk_div = (mci_readl(host, CLKDIV) & 0xFF) * 2;
> > if (clk_div == 0)
> > @@ -1301,10 +1302,28 @@ static void dw_mci_set_data_timeout(struct dw_mci *host,
> > tmout = 0xFF; /* Set maximum */
> >
> > /* TMOUT[31:8] (DATA_TIMEOUT) */
> > - if (!tmp || tmp > 0xFFFFFF)
> > - tmout |= (0xFFFFFF << 8);
> > - else
> > - tmout |= (tmp & 0xFFFFFF) << 8;
> > + if (host->quirks & DW_MMC_QUIRK_EXTENDED_TMOUT) {
>
> Adding an option for dealing with quirks, should be avoided if
> possible. That's because we want to avoid sprinkling common dw_mmc
> code with variant specific code, as it will sooner or later turn into
> a nightmare to maintain.
>
> In this case, I suggest you look into extending the struct
> dw_mci_drv_data with some new callback (perhaps ->set_data_timeout())
> and then implement it for your variant.
> If that callback is present, it should take precedence over the
> generic dw_mci_set_data_timeout(), if you get what I mean.
Hi Ulf!
Thanks! That's a good idea. I will implement the callback approach
instead of a quirk for this patch. It will be two callbacks; one for the
set_data_timeout(), and one for the set_drto().
>
> Moreover, if some common dw_mmc code needs to be called from your
> callback, I suggest we make that code available through exported
> dw_mmc library functions instead.
>
I don't think I need to export anything for this patch.
Kind regards
Mårten
> > + /*
> > + * Extended HW timer (max = 0x6FFFFF2):
> > + * ((TMOUT[10:8] - 1) * 0xFFFFFF + TMOUT[31:11] * 8)
> > + */
> > + if (!tmp || tmp > 0x6FFFFF2)
> > + tmout |= (0xFFFFFF << 8);
> > + else {
> > + /* TMOUT[10:8] */
> > + tmp2 = (((unsigned int)tmp / 0xFFFFFF) + 1) & 0x7;
> > + tmout |= tmp2 << 8;
> > +
> > + /* TMOUT[31:11] */
> > + tmp = tmp - ((tmp2 - 1) * 0xFFFFFF);
> > + tmout |= (tmp & 0xFFFFF8) << 8;
> > + }
> > + } else {
> > + if (!tmp || tmp > 0xFFFFFF)
> > + tmout |= (0xFFFFFF << 8);
> > + else
> > + tmout |= (tmp & 0xFFFFFF) << 8;
> > + }
> >
> > mci_writel(host, TMOUT, tmout);
> > dev_dbg(host->dev, "timeout_ns: %u => TMOUT[31:8]: 0x%#08x",
> > @@ -2005,9 +2024,15 @@ static void dw_mci_set_drto(struct dw_mci *host)
> > if (drto_div == 0)
> > drto_div = 1;
> >
> > + if (host->quirks & DW_MMC_QUIRK_EXTENDED_TMOUT)
> > + drto_clks = (((drto_clks & 0x7) - 1) * 0xFFFFFF) +
> > + ((drto_clks & 0xFFFFF8));
> > +
> > drto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * drto_clks * drto_div,
> > host->bus_hz);
> >
> > + dev_dbg(host->dev, "drto_ms: %u\n", drto_ms);
> > +
> > /* add a bit spare time */
> > drto_ms += 10;
> >
> > diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> > index 771d5afa3136..3b6510d4a684 100644
> > --- a/drivers/mmc/host/dw_mmc.h
> > +++ b/drivers/mmc/host/dw_mmc.h
> > @@ -118,6 +118,7 @@ struct dw_mci_dma_slave {
> > * @part_buf: Simple buffer for partial fifo reads/writes.
> > * @push_data: Pointer to FIFO push function.
> > * @pull_data: Pointer to FIFO pull function.
> > + * @quirks: Set of quirks that apply to specific versions of the IP.
> > * @vqmmc_enabled: Status of vqmmc, should be true or false.
> > * @irq_flags: The flags to be passed to request_irq.
> > * @irq: The irq value to be passed to request_irq.
> > @@ -223,6 +224,8 @@ struct dw_mci {
> > void (*push_data)(struct dw_mci *host, void *buf, int cnt);
> > void (*pull_data)(struct dw_mci *host, void *buf, int cnt);
> >
> > + u32 quirks;
> > +
> > bool vqmmc_enabled;
> > unsigned long irq_flags; /* IRQ flags */
> > int irq;
> > @@ -274,6 +277,9 @@ struct dw_mci_board {
> > struct dma_pdata *data;
> > };
> >
> > +/* Support for longer data read timeout */
> > +#define DW_MMC_QUIRK_EXTENDED_TMOUT BIT(0)
> > +
> > #define DW_MMC_240A 0x240a
> > #define DW_MMC_280A 0x280a
> >
>
> Kind regards
> Uffe
