On Wed 08 Dec 10:50 PST 2021, Kuogee Hsieh wrote: > From: Kuogee Hsieh <khsieh@xxxxxxxxxxxxxx> > > Both voltage and pre-emphasis swing level are set during link training > negotiation between host and sink. There are totally four tables added. > A voltage swing table for both hbr and hbr1, a voltage table for both > hbr2 and hbr3, a pre-emphasis table for both hbr and hbr1 and a pre-emphasis > table for both hbr2 and hbr3. In addition, write 0x0a to TX_TX_POL_INV is > added to complete the sequence of configure dp phy base on HPG. > Let me repeat my feedback on v4: https://lore.kernel.org/all/YalSS1C4%2FXUzz62q@ripper/ $subject and the commit test tells a story about you adding support for voltage and pre-emphasis swing tables. But the driver already has that! What your change does is add support for having separate tables for each version and define the v4 tables. > Chnages in v2: > -- revise commit test > -- add Fixes tag > -- replaced voltage_swing_cfg with voltage > -- replaced pre_emphasis_cfg with emphasis > -- delete drv_lvl_reg and emp_post_reg parameters from qcom_qmp_v4_phy_configure_dp_swing() > -- delete drv_lvl_reg and emp_post_reg parameters from qcom_qmp_phy_configure_dp_swing() > > Changes in V3: > -- add __qcom_qmp_phy_configure_dp_swing() to commit swing/pre-emphasis level > > Changes in V4: > -- pass 2D array to __qcom_qmp_phy_configure_dp_swing() > > Changes in V5: > -- rebase on msm-next Listing the changelog within the commit message is something done in drivers/gpu/, the rest of the kernel doesn't do this. So please move it below the '---' line. > > Fixes: aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy") So you're saying that the tables added in this commit are wrong? If so please state so in the commit message. Regards, Bjorn > Signed-off-by: Kuogee Hsieh <khsieh@xxxxxxxxxxxxxx> > Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> > --- > drivers/phy/qualcomm/phy-qcom-qmp.c | 97 +++++++++++++++++++++++++------------ > 1 file changed, 66 insertions(+), 31 deletions(-) > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c > index 456a59d..1f3585d 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp.c > +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c > @@ -4283,12 +4283,17 @@ static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = { > { 0x1f, 0xff, 0xff, 0xff } > }; > > -static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy, > - unsigned int drv_lvl_reg, unsigned int emp_post_reg) > +static int __qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy, > + unsigned int drv_lvl_reg, > + unsigned int emp_post_reg, > + const u8 voltage_swing_hbr_rbr[4][4], > + const u8 pre_emphasis_hbr_rbr[4][4], > + const u8 voltage_swing_hbr3_hbr2[4][4], > + const u8 pre_emphasis_hbr3_hbr2[4][4]) > { > const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; > unsigned int v_level = 0, p_level = 0; > - u8 voltage_swing_cfg, pre_emphasis_cfg; > + u8 voltage, emphasis; > int i; > > for (i = 0; i < dp_opts->lanes; i++) { > @@ -4297,26 +4302,25 @@ static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy, > } > > if (dp_opts->link_rate <= 2700) { > - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level]; > - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level]; > + voltage = voltage_swing_hbr_rbr[v_level][p_level]; > + emphasis = pre_emphasis_hbr_rbr[v_level][p_level]; > } else { > - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level]; > - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level]; > + voltage = voltage_swing_hbr3_hbr2[v_level][p_level]; > + emphasis = pre_emphasis_hbr3_hbr2[v_level][p_level]; > } > > /* TODO: Move check to config check */ > - if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) > + if (voltage == 0xFF && emphasis == 0xFF) > return -EINVAL; > > /* Enable MUX to use Cursor values from these registers */ > - voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; > - pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; > - > - writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg); > - writel(pre_emphasis_cfg, qphy->tx + emp_post_reg); > - writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg); > - writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg); > + voltage |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; > + emphasis |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; > > + writel(voltage, qphy->tx + drv_lvl_reg); > + writel(emphasis, qphy->tx + emp_post_reg); > + writel(voltage, qphy->tx2 + drv_lvl_reg); > + writel(emphasis, qphy->tx2 + emp_post_reg); > return 0; > } > > @@ -4325,9 +4329,13 @@ static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy) > const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; > u32 bias_en, drvr_en; > > - if (qcom_qmp_phy_configure_dp_swing(qphy, > - QSERDES_V3_TX_TX_DRV_LVL, > - QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0) > + if (__qcom_qmp_phy_configure_dp_swing(qphy, > + QSERDES_V3_TX_TX_DRV_LVL, > + QSERDES_V3_TX_TX_EMP_POST1_LVL, > + qmp_dp_v3_voltage_swing_hbr_rbr, > + qmp_dp_v3_pre_emphasis_hbr_rbr, > + qmp_dp_v3_voltage_swing_hbr3_hbr2, > + qmp_dp_v3_pre_emphasis_hbr3_hbr2) < 0) > return; > > if (dp_opts->lanes == 1) { > @@ -4465,6 +4473,35 @@ static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy) > return 0; > } > > +/* The values in these tables are given without MUX_EN (0x20) bit set */ > +static const u8 qmp_dp_v4_pre_emphasis_hbr3_hbr2[4][4] = { > + { 0x00, 0x0c, 0x15, 0x1b }, > + { 0x02, 0x0e, 0x16, 0xff }, > + { 0x02, 0x11, 0xff, 0xff }, > + { 0x04, 0xff, 0xff, 0xff } > +}; > + > +static const u8 qmp_dp_v4_voltage_swing_hbr3_hbr2[4][4] = { > + { 0x02, 0x12, 0x16, 0x1a }, > + { 0x09, 0x19, 0x1f, 0xff }, > + { 0x10, 0x1f, 0xff, 0xff }, > + { 0x1f, 0xff, 0xff, 0xff } > +}; > + > +static const u8 qmp_dp_v4_pre_emphasis_hbr_rbr[4][4] = { > + { 0x00, 0x0e, 0x15, 0x1b }, > + { 0x00, 0x0e, 0x15, 0xff }, > + { 0x00, 0x0e, 0xff, 0xff }, > + { 0x04, 0xff, 0xff, 0xff } > +}; > + > +static const u8 qmp_dp_v4_voltage_swing_hbr_rbr[4][4] = { > + { 0x08, 0x0f, 0x16, 0x1f }, > + { 0x11, 0x1e, 0x1f, 0xff }, > + { 0x16, 0x1f, 0xff, 0xff }, > + { 0x1f, 0xff, 0xff, 0xff } > +}; > + > static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy) > { > writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | > @@ -4494,16 +4531,13 @@ static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy) > > static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy) > { > - /* Program default values before writing proper values */ > - writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); > - writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); > - > - writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); > - writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL); > - > - qcom_qmp_phy_configure_dp_swing(qphy, > + __qcom_qmp_phy_configure_dp_swing(qphy, > QSERDES_V4_TX_TX_DRV_LVL, > - QSERDES_V4_TX_TX_EMP_POST1_LVL); > + QSERDES_V4_TX_TX_EMP_POST1_LVL, > + qmp_dp_v4_voltage_swing_hbr_rbr, > + qmp_dp_v4_pre_emphasis_hbr_rbr, > + qmp_dp_v4_voltage_swing_hbr3_hbr2, > + qmp_dp_v4_pre_emphasis_hbr3_hbr2); > } > > static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) > @@ -4622,6 +4656,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) > writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN); > writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN); > > + writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV); > + writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV); > + > writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG); > udelay(2000); > writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG); > @@ -4633,11 +4670,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) > 10000)) > return -ETIMEDOUT; > > - writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV); > - writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV); > > - writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); > - writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); > + writel(0x22, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); > + writel(0x22, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); > > writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); > writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL); > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
