CAAM JR nodes are configured by BootROM and are used by various software entities during the boot process before they reach the Kernel. Default BootROM configuration have JR0 and JR1 reserved for S-only access, while JR2 is generally available for both S and NS access. HAB feature of i.MX8M family does require that JR0 is reserved exclusively in S-only world, while JR1 and JR2 are both released to NS-World. OP-TEE can later reclaim the JR2 via dt_enable_secure_status() call, and modify the DID to hold it in S-World only. The above setup has been discovered during review of CAAM patchset presented to U-Boot integration [1], and does not correspond to the status on jr nodes in FDT. This missing status settings leads to the following error message during jr node probing: [ 1.509894] caam 30900000.crypto: job rings = 3, qi = 0 [ 1.525201] caam_jr 30901000.jr: failed to flush job ring 0 [ 1.525214] caam_jr: probe of 30901000.jr failed with error -5 JR register readout after BootROM execution shows the following values: JR0DID_MS = 0x8011 JR1DID_MS = 0x8011 JR2DID_MS = 0x0 This shows that JR0 and JR1 have TZ_OWN bit set, which marks them to be reserved for S-World, while JR2 remains accessible from NS-World. Provide the correct status for JR nodes in imx8m derivatives, which have a following meaning: - JR0: S-only - JR1: visible in both - JR2: NS-only Note, that JR2 is initially marked to be NS-only which does correspond to DID readout when OP-TEE is not present. Once present, OP-TEE will reclaim the JR2 and set both "status" and "secure-status" to claim JR2 for S-only access. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@xxxxxxxxxxxxxxxxxxxx> Link: [1]: https://lore.kernel.org/u-boot/AM6PR06MB4691FC905FE5658BE4B15C11A6609@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ --- Changes in V3: - No change, new patch introduced arch/arm64/boot/dts/freescale/imx8mm.dtsi | 4 ++++ arch/arm64/boot/dts/freescale/imx8mn.dtsi | 4 ++++ arch/arm64/boot/dts/freescale/imx8mp.dtsi | 4 ++++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 4 ++++ 4 files changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 5b9c2cca9ac4..51465974c4ea 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -914,18 +914,22 @@ sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + secure-status = "okay"; }; sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + secure-status = "okay"; }; sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + secure-status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index ba23b416b5e6..e5edf14319b1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -808,18 +808,22 @@ sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + secure-status = "okay"; }; sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + secure-status = "okay"; }; sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + secure-status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 977783784342..3c23bf5c3910 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -661,18 +661,22 @@ sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + secure-status = "okay"; }; sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + secure-status = "okay"; }; sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + secure-status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 95d8b95d6120..16c4c9110ce7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -999,18 +999,22 @@ sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + secure-status = "okay"; }; sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + secure-status = "okay"; }; sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + secure-status = "disabled"; }; }; -- 2.25.1
