Re: [PATCH 1/3] ALSA: hda/tegra: Skip reset on BPMP devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 12/7/2021 3:52 PM, Dmitry Osipenko wrote:
07.12.2021 09:32, Sameer Pujar пишет:
HDA regression is recently reported on Tegra194 based platforms.
This happens because "hda2codec_2x" reset does not really exist
in Tegra194 and it causes probe failure. All the HDA based audio
tests fail at the moment. This underlying issue is exposed by
commit c045ceb5a145 ("reset: tegra-bpmp: Handle errors in BPMP
response") which now checks return code of BPMP command response.

The failure can be fixed by avoiding above reset in the driver,
but the explicit reset is not necessary for Tegra devices which
depend on BPMP. On such devices, BPMP ensures reset application
during unpowergate calls. Hence skip reset on these devices
which is applicable for Tegra186 and later.
The power domain is shared with the display, AFAICS. The point of reset
is to bring h/w into predictable state. It doesn't make sense to me to
skip the reset.

Yes the power-domain is shared with display. As mentioned above, explicit reset in driver is not really necessary since BPMP is already doing it during unpowergate stage. So the h/w is already ensured to be in a good state.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux