[PATCH v5 2/4] Documentation: Add documentation for the APM X-Gene SoC EDAC DTS binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patch adds documentation for the APM X-Gene SoC EDAC DTS binding.

Signed-off-by: Feng Kan <fkan@xxxxxxx>
Signed-off-by: Loc Ho <lho@xxxxxxx>
---
 .../devicetree/bindings/edac/apm-xgene-edac.txt    |   83 ++++++++++++++++++++
 1 files changed, 83 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/edac/apm-xgene-edac.txt

diff --git a/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt b/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
new file mode 100644
index 0000000..ce8c30e
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
@@ -0,0 +1,83 @@
+* APM X-Gene SoC EDAC nodes
+
+EDAC nodes are defined to describe on-chip error detection and correction.
+There are four types of EDAC:
+
+  memory controller	- Memory controller
+  PMD (L1/L2)		- Processor module unit (PMD) L1/L2 cache
+  L3			- CPU L3 cache
+  SoC			- SoC IP such as SATA, Ethernet, and etc
+
+The following section describes the memory controller DT node binding.
+
+Required properties:
+- compatible		: Shall be "apm,xgene-edac-mc".
+- reg			: First resource shall be the PCP resource.
+			  Second resource shall be the CSW resource.
+			  Third resource shall be the MCB-A resource.
+			  Fourth resource shall be the MCB-B resource.
+			  Fifth resource shall be the MCU resource.
+- interrupts            : Interrupt-specifier for MCU error IRQ(s).
+
+The following section describes the L1/L2 DT node binding.
+
+- compatible		: Shall be "apm,xgene-edac-pmd".
+- reg			: First resource shall be the PCP resource.
+			  Second resource shall be the PMD resource.
+			  Third resource shall be the PMD efuse resource.
+- interrupts            : Interrupt-specifier for PMD error IRQ(s).
+
+The following section describes the L3 DT node binding.
+
+- compatible		: Shall be "apm,xgene-edac-l3".
+- reg			: First resource shall be the PCP resource.
+			  Second resource shall be the L3 resource.
+- interrupts            : Interrupt-specifier for L3 error IRQ(s).
+
+The following section describes the SoC DT node binding.
+
+- compatible		: Shall be "apm,xgene-edac-soc"".
+- reg			: First resource shall be the PCP resource.
+			  Second resource shall be the SoC resource.
+			  Third resource shall be the register bus resource.
+- interrupts		: Interrupt-specifier for SoC error IRQ(s).
+
+Example:
+	edacmc0: edacmc0@7e800000 {
+		compatible = "apm,xgene-edac-mc";
+		reg = <0x0 0x78800000 0x0 0x1000>,
+		      <0x0 0x7e200000 0x0 0x1000>,
+		      <0x0 0x7e700000 0x0 0x1000>,
+		      <0x0 0x7e720000 0x0 0x1000>,
+		      <0x0 0x7e800000 0x0 0x1000>;
+		interrupts = <0x0 0x20 0x4>,
+			     <0x0 0x21 0x4>;
+	};
+
+	edacl3: edacl3@7e600000 {
+		compatible = "apm,xgene-edac-l3";
+		reg = <0x0 0x78800000 0x0 0x1000>,
+		      <0x0 0x7e600000 0x0 0x1000>;
+		interrupts = <0x0 0x20 0x4>,
+			     <0x0 0x21 0x4>;
+	};
+
+	edacpmd0: edacpmd0@7c000000 {
+		compatible = "apm,xgene-edac-pmd";
+		reg = <0x0 0x78800000 0x0 0x1000>,
+		      <0x0 0x7c000000 0x0 0x200000>,
+		      <0x0 0x1054a000 0x0 0x10>;
+		interrupts = <0x0 0x20 0x4>,
+			     <0x0 0x21 0x4>;
+	};
+
+	edacsoc: edacsoc@7e930000 {
+		compatible = "apm,xgene-edac-soc";
+		reg = <0x0 0x78800000 0x0 0x1000>,
+		      <0x0 0x7e930000 0x0 0x1000>,
+		      <0x0 0x7e000000 0x0 0x1000>;
+		interrupts = <0x0 0x20 0x4>,
+			     <0x0 0x21 0x4>,
+			     <0x0 0x27 0x4>;
+	};
+
-- 
1.5.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux