On Mon, 06 Dec 2021 12:54:02 +0200, Cosmin Tanislav wrote: > The ADXL367 is an ultralow power, 3-axis MEMS accelerometer. > > The ADXL367 does not alias input signals to achieve ultralow power > consumption, it samples the full bandwidth of the sensor at all > data rates. Measurement ranges of +-2g, +-4g, and +-8g are available, > with a resolution of 0.25mg/LSB on the +-2 g range. > > In addition to its ultralow power consumption, the ADXL367 > has many features to enable true system level power reduction. > It includes a deep multimode output FIFO, a built-in micropower > temperature sensor, and an internal ADC for synchronous conversion > of an additional analog input. > > Signed-off-by: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx> > --- > .../bindings/iio/accel/adi,adxl367.yaml | 79 +++++++++++++++++++ > 1 file changed, 79 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/adi,adxl367.example.dt.yaml: adxl367@0: 'spi-max-frequency' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1563904 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
