Update the drv260x dt binding document: - Change the node name to the devices function not the device name. - Add vbat-supply to the example. - Fix indentation of the example. Signed-off-by: Dan Murphy <dmurphy@xxxxxx> --- v2 - Address comments on indentation, node declaration, add vbat-supply, removed description as it did not make sense - https://patchwork.kernel.org/patch/4765141/ .../devicetree/bindings/input/ti,drv260x.txt | 23 ++++++++++---------- 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt index a9c8519..ee09c8f 100644 --- a/Documentation/devicetree/bindings/input/ti,drv260x.txt +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt @@ -1,6 +1,4 @@ -Texas Instruments - drv260x Haptics driver family - -The drv260x family serial control bus communicates through I2C protocols +* Texas Instruments - drv260x Haptics driver family Required properties: - compatible - One of: @@ -37,15 +35,16 @@ Optional properties: 3.2 v. Example: -drv2605l: drv2605l@5a { - compatible = "ti,drv2605l"; - reg = <0x5a>; - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - mode = <DRV260X_LRA_MODE>; - library-sel = <DRV260X_LIB_LRA>; - vib-rated-mv = <3200>; - vib-overdriver-mv = <3200>; -}; +haptics: haptics@5a { + compatible = "ti,drv2605l"; + reg = <0x5a>; + vbat-supply = <&vbat>; + enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mode = <DRV260X_LRA_MODE>; + library-sel = <DRV260X_LIB_LRA>; + vib-rated-mv = <3200>; + vib-overdriver-mv = <3200>; +} For more product information please see the link below: http://www.ti.com/product/drv2605 -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
