Hi Chris,
On Thu, Aug 21, 2014 at 09:30:17PM +0800, Chris Zhong wrote:
> The RK808 chip is a power management IC for multimedia and handheld
> devices. It contains the following components:
>
> - Regulators
> - RTC
>
> The rk808 core driver is registered as a platform driver and provides
> communication through I2C with the host device for the different
> components.
>
> Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
>
> ---
>
> Changes in v3: None
> Changes in v2:
> Adviced by Mark Browm:
> - change of_find_node_by_name to find_child_by_name
> - use RK808_NUM_REGULATORS as the name of the constant
> - create a pdata when missing platform data
> - use the rk808_reg name to supply_regulator name
> - replace regulator_register with devm_regulator_register
> - some other problem with coding style
>
> drivers/mfd/Kconfig | 13 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/rk808.c | 296 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/rk808.h | 220 +++++++++++++++++++++++++++++++++
> 4 files changed, 530 insertions(+)
> create mode 100644 drivers/mfd/rk808.c
> create mode 100644 include/linux/mfd/rk808.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index de5abf2..1df133e 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -582,6 +582,19 @@ config MFD_RC5T583
> Additional drivers must be enabled in order to use the
> different functionality of the device.
>
> +config MFD_RK808
> + tristate "Rockchip RK808 Power Management chip"
> + depends on I2C
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + help
> + Select this option to get support for the RK808 Power
> + Management system device.
> + This driver provides common support for accessing the device
> + through i2c interface. The device supports multiple sub-devices
> + like interrupts, RTC, LDO and DCDC regulators, onkey.
> +
> config MFD_SEC_CORE
> bool "SAMSUNG Electronics PMIC Series Support"
> depends on I2C=y
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index f001487..dbc28e7 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -160,6 +160,7 @@ obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
> obj-$(CONFIG_MFD_PALMAS) += palmas.o
> obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
> obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
> +obj-$(CONFIG_MFD_RK808) += rk808.o
> obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
> obj-$(CONFIG_MFD_SYSCON) += syscon.o
> obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
> new file mode 100644
> index 0000000..372e5ed
> --- /dev/null
> +++ b/drivers/mfd/rk808.c
> @@ -0,0 +1,296 @@
> +/*
> + * Mfd core driver for Rockchip RK808
> + *
> + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * Author: Chris Zhong <zyw@xxxxxxxxxxxxxx>
> + * Author: Zhang Qing <zhangqing@xxxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + */
> +
> +#include <linux/bug.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/rk808.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mutex.h>
> +#include <linux/module.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/of_regulator.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +struct rk808_reg_data {
> + int addr;
> + int mask;
> + int value;
> +};
> +
> +static struct rk808 *g_rk808;
> +
> +static struct resource rtc_resources[] = {
> + {
> + .start = RK808_IRQ_RTC_ALARM,
> + .end = RK808_IRQ_RTC_ALARM,
> + .flags = IORESOURCE_IRQ,
> + }
> +};
> +
> +static const struct mfd_cell rk808s[] = {
> + {
> + .name = "rk808-regulator",
> + },
> + {
> + .name = "rk808-rtc",
> + .num_resources = ARRAY_SIZE(rtc_resources),
> + .resources = &rtc_resources[0],
> + },
> + {
> + .name = "rk808-clkout",
> + },
> +};
> +
> +static const struct rk808_reg_data pre_init_reg[] = {
> + {RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA},
> + {RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA},
> + {RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA},
> + {RK808_BUCK1_CONFIG_REG, BUCK1_RATE_MASK, BUCK_ILMIN_200MA},
> + {RK808_BUCK2_CONFIG_REG, BUCK2_RATE_MASK, BUCK_ILMIN_200MA},
> + {RK808_VB_MON_REG, MASK_ALL, VB_LO_ACT | VB_LO_SEL_3500MV},
> + {RK808_INT_STS_REG1, MASK_NONE, 0},
> + {RK808_INT_STS_REG2, MASK_NONE, 0},
> +};
> +
> +static const struct regmap_irq rk808_irqs[] = {
> + /* INT_STS */
> + [RK808_IRQ_VOUT_LO] = {
> + .mask = RK808_IRQ_VOUT_LO_MSK,
> + .reg_offset = 0,
> + },
> + [RK808_IRQ_VB_LO] = {
> + .mask = RK808_IRQ_VB_LO_MSK,
> + .reg_offset = 0,
> + },
> + [RK808_IRQ_PWRON] = {
> + .mask = RK808_IRQ_PWRON_MSK,
> + .reg_offset = 0,
> + },
> + [RK808_IRQ_PWRON_LP] = {
> + .mask = RK808_IRQ_PWRON_LP_MSK,
> + .reg_offset = 0,
> + },
> + [RK808_IRQ_HOTDIE] = {
> + .mask = RK808_IRQ_HOTDIE_MSK,
> + .reg_offset = 0,
> + },
> + [RK808_IRQ_RTC_ALARM] = {
> + .mask = RK808_IRQ_RTC_ALARM_MSK,
> + .reg_offset = 0,
> + },
> + [RK808_IRQ_RTC_PERIOD] = {
> + .mask = RK808_IRQ_RTC_PERIOD_MSK,
> + .reg_offset = 0,
> + },
> +
> + /* INT_STS2 */
> + [RK808_IRQ_PLUG_IN_INT] = {
> + .mask = RK808_IRQ_PLUG_IN_INT_MSK,
> + .reg_offset = 1,
> + },
> + [RK808_IRQ_PLUG_OUT_INT] = {
> + .mask = RK808_IRQ_PLUG_OUT_INT_MSK,
> + .reg_offset = 1,
> + },
> +};
> +
> +static struct regmap_irq_chip rk808_irq_chip = {
> + .name = "rk808",
> + .irqs = rk808_irqs,
> + .num_irqs = ARRAY_SIZE(rk808_irqs),
> + .num_regs = 2,
> + .irq_reg_stride = 2,
> + .status_base = RK808_INT_STS_REG1,
> + .mask_base = RK808_INT_STS_MSK_REG1,
> + .ack_base = RK808_INT_STS_REG1,
> +};
> +
> +static struct rk808_board *rk808_parse_dt(struct device *dev)
> +{
> + struct rk808_board *pdata;
> + struct device_node *np = dev->of_node;
> +
> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return NULL;
This should be
return ERR_PTR(-ENOMEM);
> +
> + pdata->pm_off = of_property_read_bool(np,
> + "rockchip,system-power-controller");
> +
> + return pdata;
> +}
> +
> +static void rk808_device_shutdown(void)
> +{
> + int ret;
> + struct rk808 *rk808 = g_rk808;
> +
> + if (!rk808) {
> + dev_err(rk808->dev, "%s have no g_rk808\n", __func__);
> + return;
> + }
> +
> + ret = regmap_update_bits(rk808->regmap,
> + RK808_DEVCTRL_REG,
> + DEV_OFF_RST, DEV_OFF_RST);
> + if (ret < 0)
> + dev_err(rk808->dev, "rk808 power off error!\n");
> +}
> +
> +static int rk808_pre_init(struct rk808 *rk808)
> +{
> + int i;
> + int ret = 0;
> + int table_size = sizeof(pre_init_reg) / sizeof(struct rk808_reg_data);
> +
> + for (i = 0; i < table_size; i++) {
> + ret = regmap_update_bits(rk808->regmap, pre_init_reg[i].addr,
> + pre_init_reg[i].mask,
> + pre_init_reg[i].value);
> + if (ret < 0) {
> + dev_err(rk808->dev,
> + "0x%x write err\n", pre_init_reg[i].addr);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int rk808_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + int ret;
> + struct rk808_board *pdata = dev_get_platdata(&client->dev);
> + struct rk808 *rk808;
> +
> + if (!pdata) {
> + pdata = rk808_parse_dt(&client->dev);
> + if (IS_ERR(pdata))
> + return PTR_ERR(pdata);
> + }
> +
> + rk808 = devm_kzalloc(&client->dev, sizeof(struct rk808), GFP_KERNEL);
> + if (!rk808)
> + return -ENOMEM;
> +
> + rk808->pdata = pdata;
> + rk808->i2c = client;
> + rk808->dev = &client->dev;
> + i2c_set_clientdata(client, rk808);
> +
> + rk808->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config);
> + if (IS_ERR(rk808->regmap)) {
> + ret = PTR_ERR(rk808->regmap);
> + dev_err(rk808->dev, "regmap initialization failed\n");
> + return ret;
> + }
> +
> + ret = rk808_pre_init(rk808);
> + if (ret < 0) {
> + dev_err(rk808->dev, "The rk808_pre_init failed %d\n", ret);
> + return ret;
> + }
> +
> + pdata->irq = client->irq;
> + pdata->irq_base = -1;
Hmm, the platform data should really be read-only so that if you happen to
unbind and rebind the driver we would start with the same state.
> +
> + if (!pdata->irq) {
> + dev_err(rk808->dev, "No interrupt support, no core IRQ\n");
> + return -EINVAL;
> + }
> +
> + ret = regmap_add_irq_chip(rk808->regmap, pdata->irq,
> + IRQF_ONESHOT, pdata->irq_base,
> + &rk808_irq_chip, &rk808->irq_data);
> + if (ret < 0) {
> + dev_err(rk808->dev, "Failed to add irq_chip %d\n", ret);
> + return ret;
> + }
> +
> + ret = mfd_add_devices(rk808->dev, -1,
> + rk808s, ARRAY_SIZE(rk808s),
> + NULL, 0, regmap_irq_get_domain(rk808->irq_data));
> + if (ret < 0) {
> + dev_err(rk808->dev, "failed to add MFD devices %d\n", ret);
> + goto err_irq_init_done;
> + }
> +
> + g_rk808 = rk808;
> + if (pdata->pm_off && !pm_power_off)
> + pm_power_off = rk808_device_shutdown;
> +
> + return 0;
> +
> +err_irq_init_done:
> + regmap_del_irq_chip(pdata->irq, rk808->irq_data);
> + return ret;
> +}
> +
> +static int rk808_remove(struct i2c_client *i2c)
> +{
> + struct rk808 *rk808 = i2c_get_clientdata(i2c);
> + struct rk808_board *pdata = rk808->pdata;
> +
> + regmap_del_irq_chip(pdata->irq, rk808->irq_data);
> + mfd_remove_devices(rk808->dev);
Should we undo pm_power_off assignment.
> + return 0;
> +}
> +
> +static struct of_device_id rk808_of_match[] = {
> + { .compatible = "rockchip,rk808"},
Could you throw in a space before '}' please?
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, rk808_of_match);
> +
> +static const struct i2c_device_id rk808_ids[] = {
> + { "rk808", 0},
And here as well.
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
