Re: [PATCH v2] arm64: dts: ti: k3-am64-main: add timesync router node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 02/12/21 11:00 pm, Christian Gmeiner wrote:
> The Time Sync Event Router (TIMESYNC_INTRTR0) implements a set of
> multiplexers to provide selection of active CPTS time sync events for
> routing to CPTS capable modules.
> 
> This patch adds DT node TIMESYNC_INTRTR0 using "pinctrl-single" bindings.
> 
> Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
> Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
> Signed-off-by: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>

Reviewed-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
> Changes in v2:
>   -  Use pinctrl for node name
> 
>  arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index 5ad638b95ffc..e16d2ccdd818 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -564,6 +564,14 @@ cpts@39000000 {
>  		ti,cpts-ext-ts-inputs = <8>;
>  	};
>  
> +	timesync_router: pinctrl@a40000 {
> +		compatible = "pinctrl-single";
> +		reg = <0x0 0xa40000 0x0 0x800>;
> +		#pinctrl-cells = <1>;
> +		pinctrl-single,register-width = <32>;
> +		pinctrl-single,function-mask = <0x000107ff>;
> +	};
> +
>  	usbss0: cdns-usb@f900000{
>  		compatible = "ti,am64-usb";
>  		reg = <0x00 0xf900000 0x00 0x100>;
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux