RE: [PATCH] Documentation: dts: fsl-usb: Document USB node compatible string for IP version

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





-----Original Message-----
From: Badola Nikhil-B46172 
Sent: Friday, August 22, 2014 10:18 AM
To: Wood Scott-B07421
Cc: linuxppc-dev@xxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; Mehresh Ramneek-B31383
Subject: RE: [PATCH] Documentation: dts: fsl-usb: Document USB node compatible string for IP version

Adding Ramneek

> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Friday, August 22, 2014 3:53 AM
> To: Badola Nikhil-B46172
> Cc: linuxppc-dev@xxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH] Documentation: dts: fsl-usb: Document USB node 
> compatible string for IP version
> 
> On Thu, 2014-08-21 at 14:48 +0530, Nikhil Badola wrote:
> > Document compatible string containing IP version in USB device tree 
> > node
> >
> > Signed-off-by: Nikhil Badola <nikhil.badola@xxxxxxxxxxxxx>
> > ---
> >  Documentation/devicetree/bindings/usb/fsl-usb.txt | 13 
> > ++++++++-----
> >  1 file changed, 8 insertions(+), 5 deletions(-)
> 
> Please CC devicetree@xxxxxxxxxxxxxxx on all device tree patches (in 
> addition to linuxppc-dev).
> 
> >
> > diff --git a/Documentation/devicetree/bindings/usb/fsl-usb.txt
> > b/Documentation/devicetree/bindings/usb/fsl-usb.txt
> > index 4779c02..5a3a0a8 100644
> > --- a/Documentation/devicetree/bindings/usb/fsl-usb.txt
> > +++ b/Documentation/devicetree/bindings/usb/fsl-usb.txt
> > @@ -10,7 +10,10 @@ Required properties :
> >     controllers, or "fsl-usb2-dr" for dual role USB controllers
> >     or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121.
> >     Wherever applicable, the IP version of the USB controller should
> > -   also be mentioned (for eg. fsl-usb2-dr-v2.2 for bsc9132).
> > +   also be mentioned in another string.
> > +   For multi port host USB controller with IP version <IP_Ver>, it should be
> > +   "fsl-usb2-mph-<IP_Ver>". For dual role USB controller with IP version
> > +   <IP_Ver>, it should be "fsl-usb2-dr-<IP_Ver>".
> 
> It was documented before -- this is just making it more explicit, right?
> 
> FWIW, the version number can be read out of a USB register, so I'd 
> rather remove the suggestion to specify the version number and replace 
> it with a reference to the ID register.
we have following two issues -
(a) our USBIP version register doesn't have consistent "version field size" over 
multiple version(s). This is why we couldn't use it for reading version info across
various IP versions
(b) this register is not exposed in all SoC RMs (probably because of above reason)
> 
> >   - phy_type : For multi port host USB controllers, should be one of
> >     "ulpi", or "serial". For dual role USB controllers, should be
> >     one of "ulpi", "utmi", "utmi_wide", or "serial".
> > @@ -42,9 +45,9 @@ Optional properties :
> >   - fsl,invert-pwr-fault : boolean; for MPC5121 USB0 only. Indicates
> >     the PWR_FAULT signal polarity is inverted.
> >
> > -Example multi port host USB controller device node :
> > +Example multi port host USB controller version 2.5 device node :
> >  	usb@22000 {
> > -		compatible = "fsl-usb2-mph";
> > +		compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
> >  		reg = <22000 1000>;
> >  		#address-cells = <1>;
> >  		#size-cells = <0>;
> > @@ -55,9 +58,9 @@ Example multi port host USB controller device node :
> >  		port1;
> >  	};
> >
> > -Example dual role USB controller device node :
> > +Example dual role USB controller version 2.5 device node :
> >  	usb@23000 {
> > -		compatible = "fsl-usb2-dr";
> > +		compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
> >  		reg = <23000 1000>;
> >  		#address-cells = <1>;
> >  		#size-cells = <0>;
> 
> This example doesn't correspond to any device tree I see.  Even after 
> your next patch that sets t2080's USB to v2.5, the addresses are different.
> 
I reckon that the example emphasizes on showing how IP version information is
to be stored in "compatible string". Is it necessary to make sure that we should 
always site actual values already used?
> Also, if you're going to update the example, please also update it to 
> be modern in other respects, such as using 0x for hex numbers (outside the unit address).
> 
> -Scott
> 

��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux