In preparation for this board's device tree synchronization with U-Boot,
we must find a common node ordering pattern. Alphabetical sounds about
right.
Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
---
.../boot/dts/freescale/fsl-ls1028a-rdb.dts | 84 +++++++++----------
1 file changed, 42 insertions(+), 42 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 7719f44bcaed..a6f41aa9004a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -102,6 +102,48 @@ can-transceiver {
};
};
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&enetc_mdio_pf3 {
+ sgmii_phy0: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ /* VSC8514 QSGMII quad PHY */
+ qsgmii_phy0: ethernet-phy@10 {
+ reg = <0x10>;
+ };
+
+ qsgmii_phy1: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+
+ qsgmii_phy2: ethernet-phy@12 {
+ reg = <0x12>;
+ };
+
+ qsgmii_phy3: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&enetc_port0 {
+ phy-handle = <&sgmii_phy0>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "okay";
+};
+
+&enetc_port2 {
+ status = "okay";
+};
+
&esdhc {
sd-uhs-sdr104;
sd-uhs-sdr50;
@@ -188,48 +230,6 @@ rtc@51 {
};
};
-&duart0 {
- status = "okay";
-};
-
-&duart1 {
- status = "okay";
-};
-
-&enetc_mdio_pf3 {
- sgmii_phy0: ethernet-phy@2 {
- reg = <0x2>;
- };
-
- /* VSC8514 QSGMII quad PHY */
- qsgmii_phy0: ethernet-phy@10 {
- reg = <0x10>;
- };
-
- qsgmii_phy1: ethernet-phy@11 {
- reg = <0x11>;
- };
-
- qsgmii_phy2: ethernet-phy@12 {
- reg = <0x12>;
- };
-
- qsgmii_phy3: ethernet-phy@13 {
- reg = <0x13>;
- };
-};
-
-&enetc_port0 {
- phy-handle = <&sgmii_phy0>;
- phy-mode = "sgmii";
- managed = "in-band-status";
- status = "okay";
-};
-
-&enetc_port2 {
- status = "okay";
-};
-
&mscc_felix {
status = "okay";
};
--
2.25.1
