On some boards, for routing CAN signals from controller to transceiver,
muxes might need to be set. Therefore, add support for setting the mux by
reading the mux-states property from the device tree node.
Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx>
---
drivers/phy/Kconfig | 1 +
drivers/phy/phy-can-transceiver.c | 22 ++++++++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 82b63e60c5a2..300b0f2b5f84 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -64,6 +64,7 @@ config USB_LGM_PHY
config PHY_CAN_TRANSCEIVER
tristate "CAN transceiver PHY"
select GENERIC_PHY
+ select MULTIPLEXER
help
This option enables support for CAN transceivers as a PHY. This
driver provides function for putting the transceivers in various
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index 6f3fe37dee0e..cb91d0e94da7 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -10,6 +10,7 @@
#include<linux/module.h>
#include<linux/gpio.h>
#include<linux/gpio/consumer.h>
+#include <linux/mux/consumer.h>
struct can_transceiver_data {
u32 flags;
@@ -21,13 +22,22 @@ struct can_transceiver_phy {
struct phy *generic_phy;
struct gpio_desc *standby_gpio;
struct gpio_desc *enable_gpio;
+ struct mux_state *mux_state;
};
/* Power on function */
static int can_transceiver_phy_power_on(struct phy *phy)
{
+ int ret;
struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
+ if (can_transceiver_phy->mux_state) {
+ ret = mux_state_select(can_transceiver_phy->mux_state);
+ if (ret) {
+ dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret);
+ return ret;
+ }
+ }
if (can_transceiver_phy->standby_gpio)
gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0);
if (can_transceiver_phy->enable_gpio)
@@ -45,6 +55,8 @@ static int can_transceiver_phy_power_off(struct phy *phy)
gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1);
if (can_transceiver_phy->enable_gpio)
gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0);
+ if (can_transceiver_phy->mux_state)
+ mux_state_deselect(can_transceiver_phy->mux_state);
return 0;
}
@@ -95,6 +107,16 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
drvdata = match->data;
+ if (of_property_read_bool(dev->of_node, "mux-states")) {
+ struct mux_state *mux_state;
+
+ mux_state = devm_mux_state_get(dev, NULL);
+ if (IS_ERR(mux_state))
+ return dev_err_probe(&pdev->dev, PTR_ERR(mux_state),
+ "failed to get mux\n");
+ can_transceiver_phy->mux_state = mux_state;
+ }
+
phy = devm_phy_create(dev, dev->of_node,
&can_transceiver_phy_ops);
if (IS_ERR(phy)) {
--
2.17.1
