Add a 'dtbs' Makefile target that just builds the device-tree binaries enabled by the configuration. Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx> --- arch/mips/Makefile | 5 +++++ arch/mips/boot/.gitignore | 1 + arch/mips/boot/dts/Makefile | 7 ++++++- 3 files changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 72cdd6a..26672e1 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -330,6 +330,10 @@ core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/ %.dtb %.dtb.S %.dtb.o: | scripts $(Q)$(MAKE) $(build)=arch/mips/boot/dts arch/mips/boot/dts/$@ +PHONY += dtbs +dtbs: scripts + $(Q)$(MAKE) $(build)=arch/mips/boot/dts dtbs + archprepare: ifdef CONFIG_MIPS32_N32 @echo ' Checking missing-syscalls for N32' @@ -364,6 +368,7 @@ define archhelp echo ' vmlinuz.srec - SREC zboot image' echo ' uImage - U-Boot image' echo ' uImage.gz - U-Boot image (gzip)' + echo ' dtbs - Device-tree blobs for enabled boards' echo echo ' These will be default as appropriate for a configured platform.' endef diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore index a73d6e2..d3962cd 100644 --- a/arch/mips/boot/.gitignore +++ b/arch/mips/boot/.gitignore @@ -5,3 +5,4 @@ zImage zImage.tmp calc_vmlinuz_load_addr uImage +*.dtb diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile index 6bb41df..9b3da1f 100644 --- a/arch/mips/boot/dts/Makefile +++ b/arch/mips/boot/dts/Makefile @@ -1,3 +1,8 @@ obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) -clean-files += *.dtb.S +targets += dtbs +targets += $(dtb-y) + +dtbs: $(addprefix $(obj)/, $(dtb-y)) + +clean-files += *.dtb *.dtb.S -- 2.1.0.rc2.206.gedb03e5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
