Add dt-binding for the standalone i.MX8 PCIe PHY driver. Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx> Tested-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> Reviewed-by: Tim Harvey <tharvey@xxxxxxxxxxxxx> Tested-by: Tim Harvey <tharvey@xxxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- .../bindings/phy/fsl,imx8-pcie-phy.yaml | 92 +++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml new file mode 100644 index 000000000000..b6421eedece3 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/fsl,imx8-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8 SoC series PCIe PHY Device Tree Bindings + +maintainers: + - Richard Zhu <hongxing.zhu@xxxxxxx> + +properties: + "#phy-cells": + const: 0 + + compatible: + enum: + - fsl,imx8mm-pcie-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ref + + resets: + maxItems: 1 + + reset-names: + items: + - const: pciephy + + fsl,refclk-pad-mode: + description: | + Specifies the mode of the refclk pad used. It can be UNUSED(PHY + refclock is derived from SoC internal source), INPUT(PHY refclock + is provided externally via the refclk pad) or OUTPUT(PHY refclock + is derived from SoC internal source and provided on the refclk pad). + Refer include/dt-bindings/phy/phy-imx8-pcie.h for the constants + to be used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + + fsl,tx-deemph-gen1: + description: Gen1 De-emphasis value (optional). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + fsl,tx-deemph-gen2: + description: Gen2 De-emphasis value (optional). + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + fsl,clkreq-unsupported: + type: boolean + description: A boolean property indicating the CLKREQ# signal is + not supported in the board design (optional) + +required: + - "#phy-cells" + - compatible + - reg + - clocks + - clock-names + - fsl,refclk-pad-mode + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/phy/phy-imx8-pcie.h> + #include <dt-bindings/reset/imx8mq-reset.h> + + pcie_phy: pcie-phy@32f00000 { + compatible = "fsl,imx8mm-pcie-phy"; + reg = <0x32f00000 0x10000>; + clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + clock-names = "ref"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + assigned-clock-rates = <100000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>; + resets = <&src IMX8MQ_RESET_PCIEPHY>; + reset-names = "pciephy"; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + #phy-cells = <0>; + }; +... -- 2.25.1
