Sergei Thanks for the additional comments On 08/21/2014 02:04 PM, Sergei Shtylyov wrote: > Hello. > > On 08/21/2014 10:19 PM, Dan Murphy wrote: > >> DRV2667 is a haptic/vibrator driver for Linear Resonant Actuators. >> Adding dt binding for this part > >> Signed-off-by: Dan Murphy <dmurphy@xxxxxx> >> --- >> .../devicetree/bindings/input/ti,drv2667.txt | 18 ++++++++++++++++++ >> 1 file changed, 18 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt > >> diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt >> new file mode 100644 >> index 0000000..525216d >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt >> @@ -0,0 +1,18 @@ >> +Texas Instruments - drv2667 Haptics driver >> + >> +The drv2667 uses serial control bus communicates through I2C protocols >> + >> +Required properties: >> + - compatible - "ti,drv2667" - DRV2667 >> + - reg - I2C slave address >> + - vbat-supply - Required supply regulator >> + >> +Example: >> + >> +drv2667: drv2667@59 { > > The ePAPR standard [1] has something to say on this matter: What is this reference? Did not know this existed so wanted to read up on it. I can change it to haptics or vibrator > > "The name of a node should be somewhat generic, reflecting the function of the > device and not its precise programming model." > >> + compatible = "ti,drv2667"; > > Indented too much to the right. One tab to many. Got it > >> + reg = <0x59>; > > Still no "vbat-supply"... :-/ > Still have not sent in v2 of the patch yet. Waiting on other comments. >> +}; > [...] > > WBR, Sergei > > -- ------------------ Dan Murphy -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html