On Wed, Nov 17, 2021 at 09:13:33AM -0600, Rob Herring wrote:
> On Wed, Nov 17, 2021 at 8:34 AM Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote:
> >
> > Add support for the HDMI port found on RK3568.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/rockchip/rk356x.dtsi | 65 ++++++++++++++++++++++++
> > 1 file changed, 65 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > index 6ebf7c14e096a..53be61a7ce595 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > @@ -472,18 +472,36 @@ vp0: port@0 {
> > #address-cells = <1>;
> > #size-cells = <0>;
> > reg = <0>;
> > +
> > + vp0_out_hdmi: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint = <&hdmi_in_vp0>;
> > + status = "disabled";
> > + };
> > };
> >
> > vp1: port@1 {
> > #address-cells = <1>;
> > #size-cells = <0>;
> > reg = <1>;
> > +
> > + vp1_out_hdmi: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint = <&hdmi_in_vp1>;
> > + status = "disabled";
> > + };
> > };
> >
> > vp2: port@2 {
> > #address-cells = <1>;
> > #size-cells = <0>;
> > reg = <2>;
> > +
> > + vp2_out_hdmi: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint = <&hdmi_in_vp2>;
> > + status = "disabled";
> > + };
> > };
> > };
> > };
> > @@ -499,6 +517,53 @@ vop_mmu: iommu@fe043e00 {
> > status = "disabled";
> > };
> >
> > + hdmi: hdmi@fe0a0000 {
> > + compatible = "rockchip,rk3568-dw-hdmi";
> > + reg = <0x0 0xfe0a0000 0x0 0x20000>;
> > + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cru PCLK_HDMI_HOST>,
> > + <&cru CLK_HDMI_SFR>,
> > + <&cru CLK_HDMI_CEC>,
> > + <&cru HCLK_VOP>;
> > + clock-names = "iahb", "isfr", "cec", "hclk";
> > + power-domains = <&power RK3568_PD_VO>;
> > + reg-io-width = <4>;
> > + rockchip,grf = <&grf>;
> > + #sound-dai-cells = <0>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> > + status = "disabled";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + hdmi_in: port@0 {
>
>
> The schema says there is only 1 'port' node. Please run schema
> validation when making DT changes.
>
> However, an HDMI bridge should also define an output port to a
> connector node (or another bridge). So the fix is to allow 'port@0'
> and add an output port.
The rockchip bindings traditionally don't have a connector explicitly
specified in their device trees. I'll stick to that for the next round.
If necessary I'll look later what it takes to add a connector node.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
