Hi all,
this patch series contains PHYTEC i.MX 6UL/ULL devicetree patches not
yet upstreamed.
First and second patch add devicetree for relatively new phyGATE
Tauri-S, which is based on i.MX 6ULL.
Third patch changes USB LDO voltage for i.MX 6UL/ULL phyCORE devices so
they match USB Full-speed compliance.
The fourth patch moves from using 2 pwm-cell to default 3 cell pwm
property.
Best regards,
Andrej
Alexander Bauer (1):
ARM: dts: imx6ull: Add support for PHYTEC phyGATE-Tauri-S with i.MX
6ULL
Andrej Picej (2):
dt-bindings: arm: fsl: add PHYTEC phyGATE Tauri i.MX6 ULL
ARM: dts: imx6ul: peb-av-02: move to 3 cell pwm
Yunus Bas (1):
ARM: dts: imx6ul: phycore: Change USB LDO voltage for usb compliance
.../devicetree/bindings/arm/fsl.yaml | 9 +
arch/arm/boot/dts/Makefile | 2 +
.../boot/dts/imx6ul-phytec-phycore-som.dtsi | 5 +
.../dts/imx6ul-phytec-segin-peb-av-02.dtsi | 3 +-
.../boot/dts/imx6ull-phytec-tauri-emmc.dts | 20 +
.../boot/dts/imx6ull-phytec-tauri-nand.dts | 20 +
arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi | 605 ++++++++++++++++++
7 files changed, 662 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
--
2.25.1
