Re: [PATCH v3 3/5] pinctrl: qcom: Move chip specific functions to right files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 29/11/2021 09:58, Srinivasa Rao Mandadapu wrote:
Update lpass lpi pin control driver to accommodate new lpass variant
SoC specific drivers.
Move sm8250 SoC specific functions to pinctrl-sm8250-lpass-lpi.c file
and common declarations to pinctrl-lpass-lpi.h header file.

Signed-off-by: Srinivasa Rao Mandadapu <srivasam@xxxxxxxxxxxxxx>
Co-developed-by: Venkata Prasad Potturu <potturu@xxxxxxxxxxxxxx>
Signed-off-by: Venkata Prasad Potturu <potturu@xxxxxxxxxxxxxx>
---
  drivers/pinctrl/qcom/Makefile                   |   1 +
  drivers/pinctrl/qcom/pinctrl-lpass-lpi.c        | 251 +-----------------------
  drivers/pinctrl/qcom/pinctrl-lpass-lpi.h        | 139 +++++++++++++
  drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 125 ++++++++++++
  4 files changed, 271 insertions(+), 245 deletions(-)
  create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
  create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c

diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 7a12e8c..74568cf 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -37,3 +37,4 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
  obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
  obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
  obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
+obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o

This is confusing, either we make new
CONFIG_PINCTRL_SM8250_LPASS_LPI here and use it for pinctrl-sm8250-lpass-lpi.o

diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index 2f19ab4..2641489 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -4,237 +4,16 @@
   * Copyright (c) 2020 Linaro Ltd.
   */
-#include <linux/bitops.h>
-#include <linux/bitfield.h>

Looks like some of these are removed without a reason.


  #include <linux/clk.h>
  #include <linux/gpio/driver.h>
-#include <linux/io.h>
-#include <linux/module.h>
  #include <linux/of_device.h>
-#include <linux/of.h>
  #include <linux/pinctrl/pinconf-generic.h>
  #include <linux/pinctrl/pinconf.h>
  #include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/types.h>
  #include "../core.h"
  #include "../pinctrl-utils.h"
+#include "pinctrl-lpass-lpi.h"

...


-
-module_platform_driver(lpi_pinctrl_driver);
-MODULE_DESCRIPTION("QTI LPI GPIO pin control driver");
-MODULE_LICENSE("GPL");

if you build this as Modules your build would fail without MODULE_LICENSE().


diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
new file mode 100644
index 0000000..b0afb40
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020 Linaro Ltd.
+ */
+#ifndef __PINCTRL_LPASS_LPI_H__
+#define __PINCTRL_LPASS_LPI_H__
+
+#define LPI_SLEW_RATE_CTL_REG	0xa000
+#define LPI_TLMM_REG_OFFSET		0x1000
+#define LPI_SLEW_RATE_MAX		0x03
+#define LPI_SLEW_BITS_SIZE		0x02
+#define LPI_SLEW_RATE_MASK		GENMASK(1, 0)
+#define LPI_GPIO_CFG_REG		0x00
+#define LPI_GPIO_PULL_MASK		GENMASK(1, 0)
+#define LPI_GPIO_FUNCTION_MASK		GENMASK(5, 2)
+#define LPI_GPIO_OUT_STRENGTH_MASK	GENMASK(8, 6)
+#define LPI_GPIO_OE_MASK		BIT(9)
+#define LPI_GPIO_VALUE_REG		0x04
+#define LPI_GPIO_VALUE_IN_MASK		BIT(0)
+#define LPI_GPIO_VALUE_OUT_MASK		BIT(1)
+
+#define LPI_GPIO_BIAS_DISABLE		0x0
+#define LPI_GPIO_PULL_DOWN		0x1
+#define LPI_GPIO_KEEPER			0x2
+#define LPI_GPIO_PULL_UP		0x3
+#define LPI_GPIO_DS_TO_VAL(v)		(v / 2 - 1)
+#define NO_SLEW				-1
+
+#define LPI_FUNCTION(fname)			                \
+	[LPI_MUX_##fname] = {		                \
+		.name = #fname,				\
+		.groups = fname##_groups,               \
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+#define LPI_PINGROUP(id, soff, f1, f2, f3, f4)		\
+	{						\
+		.name = "gpio" #id,			\
+		.pins = gpio##id##_pins,		\
+		.pin = id,				\
+		.slew_offset = soff,			\
+		.npins = ARRAY_SIZE(gpio##id##_pins),	\
+		.funcs = (int[]){			\
+			LPI_MUX_gpio,			\
+			LPI_MUX_##f1,			\
+			LPI_MUX_##f2,			\
+			LPI_MUX_##f3,			\
+			LPI_MUX_##f4,			\
+		},					\
+		.nfuncs = 5,				\
+	}
+
+struct lpi_pingroup {
+	const char *name;
+	const unsigned int *pins;
+	unsigned int npins;
+	unsigned int pin;
+	/* Bit offset in slew register for SoundWire pins only */
+	int slew_offset;
+	unsigned int *funcs;
+	unsigned int nfuncs;
+};
+
+struct lpi_function {
+	const char *name;
+	const char * const *groups;
+	unsigned int ngroups;
+};
+
+struct lpi_pinctrl_variant_data {
+	const struct pinctrl_pin_desc *pins;
+	int npins;
+	const struct lpi_pingroup *groups;
+	int ngroups;
+	const struct lpi_function *functions;
+	int nfunctions;
+};
+
+#define MAX_LPI_NUM_CLKS	2
+
+struct lpi_pinctrl {
+	struct device *dev;
+	struct pinctrl_dev *ctrl;
+	struct gpio_chip chip;
+	struct pinctrl_desc desc;
+	char __iomem *tlmm_base;
+	char __iomem *slew_base;
+	struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
+	struct mutex slew_access_lock;
+	const struct lpi_pinctrl_variant_data *data;
+};
+

From here
<<<

+enum lpass_lpi_functions {
+	LPI_MUX_dmic1_clk,
+	LPI_MUX_dmic1_data,
+	LPI_MUX_dmic2_clk,
+	LPI_MUX_dmic2_data,
+	LPI_MUX_dmic3_clk,
+	LPI_MUX_dmic3_data,
+	LPI_MUX_i2s1_clk,
+	LPI_MUX_i2s1_data,
+	LPI_MUX_i2s1_ws,
+	LPI_MUX_i2s2_clk,
+	LPI_MUX_i2s2_data,
+	LPI_MUX_i2s2_ws,
+	LPI_MUX_qua_mi2s_data,
+	LPI_MUX_qua_mi2s_sclk,
+	LPI_MUX_qua_mi2s_ws,
+	LPI_MUX_swr_rx_clk,
+	LPI_MUX_swr_rx_data,
+	LPI_MUX_swr_tx_clk,
+	LPI_MUX_swr_tx_data,
+	LPI_MUX_wsa_swr_clk,
+	LPI_MUX_wsa_swr_data,
+	LPI_MUX_gpio,
+	LPI_MUX__,
+};
+
+static const unsigned int gpio0_pins[] = { 0 };
+static const unsigned int gpio1_pins[] = { 1 };
+static const unsigned int gpio2_pins[] = { 2 };
+static const unsigned int gpio3_pins[] = { 3 };
+static const unsigned int gpio4_pins[] = { 4 };
+static const unsigned int gpio5_pins[] = { 5 };
+static const unsigned int gpio6_pins[] = { 6 };
+static const unsigned int gpio7_pins[] = { 7 };
+static const unsigned int gpio8_pins[] = { 8 };
+static const unsigned int gpio9_pins[] = { 9 };
+static const unsigned int gpio10_pins[] = { 10 };
+static const unsigned int gpio11_pins[] = { 11 };
+static const unsigned int gpio12_pins[] = { 12 };
+static const unsigned int gpio13_pins[] = { 13 };
>>>
to here are specific to sm8250, so it should not be in header file to start with.


+
+int lpi_pinctrl_probe(struct platform_device *pdev);
+int lpi_pinctrl_remove(struct platform_device *pdev);
+
+#endif /*__PINCTRL_LPASS_LPI_H__*/
+
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
new file mode 100644
index 0000000..3eba8b3
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*

...

+
+static struct platform_driver lpi_pinctrl_driver = {
+	.driver = {
+		   .name = "qcom-sm8250-lpass-lpi-pinctrl",
+		   .of_match_table = lpi_pinctrl_of_match,
+	},
+	.probe = lpi_pinctrl_probe,
+	.remove = lpi_pinctrl_remove,
+};
+
+module_platform_driver(lpi_pinctrl_driver);
+MODULE_DESCRIPTION("QTI LPI GPIO pin control driver");

may be :
"SM8250 LPI GPIO pin control driver"

--srini
+MODULE_LICENSE("GPL");
+




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux