From: Kshitiz Godara <kgodara@xxxxxxxxxxxxxx>
Add Touchscreen and touchpad hid-over-i2c node for the sc7280 CRD board
Signed-off-by: Kshitiz Godara <kgodara@xxxxxxxxxxxxxx>
Signed-off-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280-crd.dts | 61 +++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
index 1e3e2f3..cd2755c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
@@ -23,6 +23,47 @@
};
};
+ap_tp_i2c: &i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ trackpad: trackpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_int_odl>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+ post-power-on-delay-ms = <20>;
+ hid-descr-addr = <0x0001>;
+ vdd-supply = <&vreg_l18b_1p8>;
+
+ wakeup-source;
+ };
+};
+
+ap_ts_pen_1v8: &i2c13 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@5c {
+ compatible = "hid-over-i2c";
+ reg = <0x5c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+ post-power-on-delay-ms = <500>;
+ hid-descr-addr = <0x0000>;
+
+ vdd-supply = <&vreg_l19b_1p8>;
+ };
+};
+
&nvme_3v3_regulator {
gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
};
@@ -30,3 +71,23 @@
&nvme_pwren {
pins = "gpio51";
};
+
+&tlmm {
+ tp_int_odl: tp-int-odl {
+ pins = "gpio7";
+ function = "gpio";
+ bias-disable;
+ };
+
+ ts_int_l: ts-int-l {
+ pins = "gpio55";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ ts_reset_l: ts-reset-l {
+ pins = "gpio54";
+ function = "gpio";
+ bias-disable;
+ };
+};
--
2.7.4
