On Thu, 2014-08-21 at 01:32PM +0200, Andreas Färber wrote:
> Am 21.08.2014 10:41, schrieb Michal Simek:
> > On 08/20/2014 05:56 PM, Soren Brinkmann wrote:
> >> Add missing Ethernet phys to Zynq DTs.
> >>
> >> Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
> >> ---
> >> arch/arm/boot/dts/zynq-zc702.dts | 6 ++++++
> >> arch/arm/boot/dts/zynq-zc706.dts | 6 ++++++
> >> arch/arm/boot/dts/zynq-zed.dts | 6 ++++++
> >> 3 files changed, 18 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
> >> index 30bcfe20f0bc..fa810505ab8f 100644
> >> --- a/arch/arm/boot/dts/zynq-zc702.dts
> >> +++ b/arch/arm/boot/dts/zynq-zc702.dts
> >> @@ -36,6 +36,12 @@
> >> &gem0 {
> >> status = "okay";
> >> phy-mode = "rgmii-id";
> >> + phy-handle = <ðernet_phy>;
> >> +
> >> + ethernet_phy: ethernet-phy@7 {
> >> + compatible = "marvell,88e1116r", "ethernet-phy-ieee802.3-c22";
> >
> > c22 is completely unused by the kernel and also c22 is default option anyway.
> > Any advantage to have c22 specified here?
>
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/phy.txt
>
> Sören's marvell,* entries do not seem documented, therefore I used the
> documented "ethernet-phy-idAAAA.BBBB" based syntax. The documented
> example specifically uses -c22, too.
>
> Either it's okay to prepend unrecognized model strings, then you should
> update zynq-parallella.dts as well (I put the model in a comment there)
> or use the official strings like I used and keep the readable models as
> comments. Documenting all those "marvell,88e1116r", "marvell,88e1518",
> "marvell,88e1318" PHY bindings and possibly prepending them to the ID
> based strings would be another option, of course.
These phy-bindings are everything than obvious to me. It seems the docs
are spread across a couple of different files and not fully up to date
either. I basically tried to get something working out of the docs, the
parallela and our vendor DT files.
So my thinkings:
- the compatible string with the -c22 is used and documented in the phy
bindings, it should be there.
- the ID based strings seem to be not needed since, IIUC, the core
reads the ID from the PHY and uses it, so I just left it out not
trying to figure out how to obtain the correct ID
- the marvell compatible strings are used in our vendor tree. They
aren't used anywhere but in our vendor tree. I though keeping them is
nice since it identifies the PHY fully. And in case that level of
detail is needed at some point it is already there.
Assuming that we wanna keep things this way, I'm happy to re-spin this
patch and also add a similar compatible string to the parallela DT.
Thanks,
Sören
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
