2014-08-13 4:11 GMT+02:00 Joe.C <srv_yingjoe.chen@xxxxxxxxxxxx>: > From: "Joe.C" <yingjoe.chen@xxxxxxxxxxxx> > > Add binding documentation for Mediatek SoC GIC interrupt polarity extension. > > Signed-off-by: Joe.C <yingjoe.chen@xxxxxxxxxxxx> > --- > .../bindings/interrupt-controller/mediatek,intpol.txt | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mediatek,intpol.txt I think the place for the file should be in Documentation/devicetree/bindings/arm/mediatek/mediatek,intpol.txt as it is a interrupt-controller extension of the mediatek architecture. > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,intpol.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,intpol.txt > new file mode 100644 > index 0000000..16ea372 > --- /dev/null > +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,intpol.txt > @@ -0,0 +1,16 @@ > +Mediatek 65xx/81xx GIC interrupt polarity extension > + > +Mediatek SOCs contain controllable inverter for each GIC SPI interrupt, > +these can be used as GIC interrupt polarity extension. > + > +Required properties: > +- compatible: Compatible property value should be "mediatek,mt6577-intpol" > + > +- reg: Physical base address of the int pol registers and length of memory > + mapped region. > + > +Example: > + intpol: intpol@10200100 { > + compatible = "mediatek,mt6577-intpol"; > + reg = <0x10200100 0x1c>; > + }; > -- > 1.8.1.1.dirty > -- motzblog.wordpress.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html