Hi Felipe, On Thu, 21 Aug 2014, Felipe Balbi wrote: > > Currently (in the vendor tree) one of the phys lives in > > drivers/usb/phy and the other in drivers/phy. > > I believe that is because one is only a usb phy and the other is a > > multi function phy which can drive PCI-E or USB3. > > right, but for mainline, we can have both PHYs in drivers/phy only. Ah ok, I didn't know that, so thanks for that info. > > > So to make that work, when dwc3/core.c gets the PHYS in > > dwc3_core_get_phy() we need to use the different bindings. > > > > I think we are the only platform using "one of each", but luckily > > dwc3_core_get_phy() has been written generically enough that it "just > > works" :-). > > true, but I want to drop support for the legacy drivers/usb/phy layer > from dwc3. I'll try to move all PHYs to drivers/phy for v3.18. Ok, so for the next re-spin I will change this to just use the generic phy binding for both usb2 & usb3 phys. In parallel I will also migrate over the drivers/usb/phy driver to be just a generic phy before I attempt to upstream it. regards, Peter -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
