this helps human readers considerably to determine the line name for a
given offset or vice versa.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 28 +++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 631dd5baf68d..4432412044de 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -65,12 +65,12 @@ &ddc1 {
};
&expgpio {
- gpio-line-names = "BT_ON",
+ gpio-line-names = "BT_ON", /* 0 */
"WL_ON",
"PWR_LED_OFF",
"GLOBAL_RESET",
"VDD_SD_IO_SEL",
- "CAM_GPIO",
+ "CAM_GPIO", /* 5 */
"SD_PWR_ON",
"";
};
@@ -84,66 +84,66 @@ &gpio {
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
- gpio-line-names = "ID_SDA",
+ gpio-line-names = "ID_SDA", /* 0 */
"ID_SCL",
"SDA1",
"SCL1",
"GPIO_GCLK",
- "GPIO5",
+ "GPIO5", /* 5 */
"GPIO6",
"SPI_CE1_N",
"SPI_CE0_N",
"SPI_MISO",
- "SPI_MOSI",
+ "SPI_MOSI", /* 10 */
"SPI_SCLK",
"GPIO12",
"GPIO13",
/* Serial port */
"TXD1",
- "RXD1",
+ "RXD1", /* 15 */
"GPIO16",
"GPIO17",
"GPIO18",
"GPIO19",
- "GPIO20",
+ "GPIO20", /* 20 */
"GPIO21",
"GPIO22",
"GPIO23",
"GPIO24",
- "GPIO25",
+ "GPIO25", /* 25 */
"GPIO26",
"GPIO27",
"RGMII_MDIO",
"RGMIO_MDC",
/* Used by BT module */
- "CTS0",
+ "CTS0", /* 30 */
"RTS0",
"TXD0",
"RXD0",
/* Used by Wifi */
"SD1_CLK",
- "SD1_CMD",
+ "SD1_CMD", /* 35 */
"SD1_DATA0",
"SD1_DATA1",
"SD1_DATA2",
"SD1_DATA3",
/* Shared with SPI flash */
- "PWM0_MISO",
+ "PWM0_MISO", /* 40 */
"PWM1_MOSI",
"STATUS_LED_G_CLK",
"SPIFLASH_CE_N",
"SDA0",
- "SCL0",
+ "SCL0", /* 45 */
"RGMII_RXCLK",
"RGMII_RXCTL",
"RGMII_RXD0",
"RGMII_RXD1",
- "RGMII_RXD2",
+ "RGMII_RXD2", /* 50 */
"RGMII_RXD3",
"RGMII_TXCLK",
"RGMII_TXCTL",
"RGMII_TXD0",
- "RGMII_TXD1",
+ "RGMII_TXD1", /* 55 */
"RGMII_TXD2",
"RGMII_TXD3";
};
base-commit: fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf
--
2.30.2
